HPE ProLiant DL380 Gen10 Plus Networking Adapters
Enhance the networking capabilities of your HPE ProLiant DL380 Gen10 Plus server with enterprise-grade network interface cards (NICs) and Ethernet adapters. Connect your infrastructure to high-speed networks for improved efficiency and performance.
Available DL380 Gen10 Plus Networking Options:
- Ethernet Adapters: 1GbE, 10GbE, 25GbE, and 100GbE options.
- Network Interface Cards (NICs): High-speed PCIe-based networking solutions.
- Fiber & Copper Connectivity: SFP+, SFP28, QSFP28, and RJ-45 options.
✅ Looking for a specific DL380 Gen10 Plus networking solution? Browse our selection or contact us for assistance.
Networking
1 Gigabit Ethernet adapters
CHF 326
CHF 191.15
CHF 693
CHF 412.10
10 Gigabit Ethernet adapters
Notes: Unless otherwise noted, one of the below 10Gb networking adapters below can be selected as the primary networking choice when configuring a Networking Choice (NC) Configure-to-Order (CTO) chassis. The DL380 Gen10 NC CTO chassis does not come with embedded networking, hence the requirement to configure with either a FlexibleLOM or select PCIe networking adapter.
CHF 883
CHF 518.02
CHF 388
CHF 227.56
CHF 657
CHF 385.62
CHF 525
CHF 307.83
CHF 645
CHF 378.17
CHF 933
CHF 546.98
25 Gigabit Ethernet adapters
Notes: Unless otherwise noted, one of the below 10/25Gb networking adapters below can be selected as the primary networking choice when configuring a Networking Choice (NC) Configure-to-Order (CTO) chassis.
The DL380 Gen10 Plus NC CTO chassis does not come with embedded networking, hence the requirement to configure with either an OCP3 or select PCIe networking adapter.
CHF 1,042
CHF 611.52
CHF 564
CHF 331.00
CHF 564
CHF 331.00

Notes: Could observe sub-optimal performance if installed in x8 slot.
CHF 1,042
CHF 611.52
CHF 591
CHF 346.72

Notes: Could observe sub-optimal performance if installed in x8 slot.
CHF 419
CHF 245.77
CHF 432
CHF 253.22
CHF 3,508
CHF 2,057.99
100 Gigabit Ethernet Adapters
CHF 1,990
CHF 1,530.88

Notes:
- Could observe sub-optimal performance if installed in x8 slot.
- Not allowed in slots 3 or 6
CHF 566
CHF 429.47

1. These cards are not supported with 12LFF CTO config.
2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis.
3. Required to use Max Performance Fan Kit
4. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6.
CHF 1,055
CHF 618.97
Notes:
- A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
- Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information.
- Not allowed in slots 3 or 6

Notes:
- Could observe sub-optimal performance if installed in x8 slot.
- Not allowed in slots 3 or 6
CHF 856
CHF 502.29
200 Gigabit Ethernet Adapters
CHF 2,607
CHF 2,034.82
1. These cards ar note supported with 12LFF CTO config.
2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis.
3. Required to use Max Performance Fan Kit
4. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6.
200 Gigabit Slingshot Adapters

Notes:
- This option requires the selection of Max Performance Fan Kit (P14608-B21).
- This option cannot be selected with 12LFF Model X.
- Max = 3
- Can only be selected or configured for a Cray Shasta Solutions or Rogue Solutions. Not configurable for Non-Cray or Non-Rogue Solutions.
OCP 3.0 Adapters
CHF 308
CHF 180.40
CHF 420
CHF 246.60
CHF 286
CHF 167.98
CHF 554
CHF 395.55
CHF 374
CHF 219.29
CHF 463
CHF 318.59
CHF 731
CHF 428.65
CHF 1,107
CHF 649.59
CHF 549
CHF 321.90
CHF 629
CHF 369.07
CHF 789
CHF 463.40

Notes: Adapter operates in either x8 or x16 mode. If x16 is desired, must select the HPE ProLiant DL300 Gen10 Plus OCP x16 Enablement Kit (P36661-B21)
CHF 564
CHF 331.00
CHF 1,702
CHF 998.79

Notes:
- Requires selection of HPE DL300 Gen10+ OCP x16 enablement Kit (P36661-B21).
- This option requires the selection of Max Performance Fan Kit (P14608-B21).
- This option cannot be selected with 12LFF Model X and 24SFF Model X.
- This option cannot be selected if 4LFF Midtray (P26919-B21/ P55700-B21) or 8SFF x1 Mid Tray (P27193-B21) or 8SFF U.3 x4 Mid Tray (P39769-B21) is selected.
CHF 1,666
CHF 977.28
OCP 3.0 Enablement
HPE InfiniBand
1. These cards are not supported with 12LFF/24SFF CTO config.
2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis.
3. Required to use Max Performance Fan Kit
4. Not supported with DIMMs with more than 128GB
5. Not supported with CPUs more than 240W
6. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6.
7. Could observe sub-optimal performance if installed in x8 slot.

1. This card is not supported with 12LFF CTO config.
2. This card is not supported with mid-tray drive cages for both LFF/SFF chassis.
3. Required to use Max Performance Fan Kit
4. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6.
5. Could observe sub-optimal performance if installed in x8 slot.

1. These cards ar note supported with 12LFF CTO config.
2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis.
3. Required to use Max Performance Fan Kit
4. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6.
5. Could observe sub-optimal performance if installed in x8 slot.
CHF 3,016
CHF 1,770.02

Notes:
- Not allowed in slots 3 or 6
CHF 226
CHF 161.36

Notes:
- Could observe sub-optimal performance if installed in x8 slot.
- Not allowed in slots 3 or 6
CHF 1,234
CHF 724.06