HPE ProLiant BL2x220c G6 Parts
Unique Options
CA$320
CA$188.24
Ethernet Mezzanine Options
Gigabit Ethernet Mezzanines
CA$104
CA$76.94
NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on 2 of the 4 ports.
CA$93
CA$74.20
CA$125
CA$98.93
CA$111
CA$82.44
NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on only 2 of the 4 ports.
CA$82
CA$57.71
CA$280
CA$200.60
NOTE: The Gigabit Ethernet adapters above transmit from the server at 2000 Mbps, full duplex per port only. For more information, see the "Network Controller" segment in the Standards Features section.
10 Gigabit Ethernet Mezzanines
NOTE: A 10 Gigabit Ethernet adapter is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HPE BladeSystem c7000 Enclosure) or bays 2-4 (HPE BladeSystem c3000 Enclosure).
NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of server memory.
NOTE: Each 10 Gigabit Either adapter supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 enabled module and will link with all current 1Gb switches at 1Gb.
NOTE: The ROM Based Setup Utility (RBSU) feature allows for the configuring of a FlexFabric Adapter to any of the supported protocols. For example iSCSI to FCoE (Fibre Channel over Ethernet). Note that a HPE Virtual Connect profile takes precedence over the setting in this menu. Also, some FlexFabric Adapters may require that network boot be enabled in order to configure the protocol. If the protocol is configured without enabling network boot with certain FlexFabric Adapters, the protocol may not take effect. Once the protocol has taken effect on the first boot after configuring this option, network boot may be disabled if desired.
CA$684
CA$542.73
CA$201
CA$134.65
CA$88
CA$67.33
CA$440
CA$299.53
CA$133
CA$105.80
CA$126
CA$87.94
CA$100
CA$70.07
Fibre Channel Mezzanine Options
4Gb Fibre Channel Mezzanine Cards
Memory
Registered DIMMs (RDIMMs)
CA$67
CA$52.21
CA$74
CA$52.21
CA$69
CA$53.59
CA$128
CA$89.31
CA$111
CA$89.31
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
CA$77
CA$53.59
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
CA$95
CA$67.33
Unbuffered with ECC DIMMs (UDIMMs)
CA$78
CA$52.21
CA$91
CA$61.83
CA$92
CA$65.95
NOTE: All DDR3 memory option kits consist of one DIMM per kit.
NOTE: Kits described as LP include Low Power DIMMs.
NOTE: PC3L is a low voltage memory.
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SATA Non-Hot Plug Solid State Drive (SSD)
NOTE: One per server node.
SATA Non-Hot Plug SFF (2.5-inch) Entry (ETY) Drives
CA$155
CA$107.17
NOTE: One per server node.
Storage Controllers
HPE Smart Array P700 Controller
CA$126
CA$101.68
CA$126
CA$101.68
I/O Expansion Options
CA$5,267
CA$4,740.30
CA$1,305
CA$1,030.50
CA$980
CA$680.13
c-Class Mezzanine Options
NOTE: Only a single port can be used on the BL2x220c.
CA$293
CA$204.73
Why Global One?
- Trusted by thousands. Over 32,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.
