Global One Technology is open normal hours and is not experiencing any fulfillment delays during the COVID-19 pandemic.
 

HP ProLiant XL730f Gen9 Parts

Processors
E5-2600 v3 series Processors
Intel Xeon E5-2670 v3
Intel Xeon E5-2680 v3
Intel Xeon E5-2690 v3
Intel Xeon E5-2695 v3
Back to top
Memory
HP SmartMemory
DDR4 Registered (RDIMM)
16 DIMM Slots available per server and 32 slots available per tray
256GB (16 x16GB) Registered memory configurations
NOTE: For additional information, please see the HP SmartMemory QuickSpecs at:https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04111535
NOTE: HP certified SmartMemory must be used.
NOTE: Depending on the memory configuration and processor model, the memory speed may run at 2133 MHz or 1866MHz. Please see the Online Memory Configuration Tool at: www.hp.com/go/DDR4memory-configurator.
NOTE: The Apollo System requires heat spreaders on the DIMMs for the ProLiant XL730f Gen9 Servers.  These are installed directly on the DIMM itself.  These DIMMs are specifically for the ProLiant XL730f Gen9Servers and should not be used in any other server.
Back to top
Drives
NOTE: The components of a storage subsystem (e.g., the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
Back to top
InfiniBand
NOTE: Dual port ConnectX-3 FDR/QDR IB or 40/10GbE. No IB Enablement Kit required.
NOTE: Please see the QuickSpecs for additional information:http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04154440
NOTE: Please see the QuickSpecs for additional information:http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04154440
Back to top

Last updated: 7/15/2020

Need help finding the correct part? Live Chat operators are standing by. LET US HELP