HPE ProLiant DL360 Gen10 Parts

HPE ProLiant DL360 Gen10 Parts

HPE ProLiant DL360 Gen10 Parts

Find genuine HPE ProLiant DL360 Gen10 parts to keep your server running at peak performance. Whether you need to replace a failed component or upgrade for enhanced computing power, we offer a complete selection of memory, drives, power supplies, storage controllers, networking, processors, and more.

Available HPE DL360 Gen10 Parts:

  • Memory: Upgrade with high-performance DDR4 RAM.
  • Drives: Choose from enterprise SSDs, NVMe, SAS, and SATA HDDs.
  • Storage Controllers: Ensure data protection with HPE Smart Array RAID controllers.
  • Networking: High-speed Ethernet adapters and NICs for superior connectivity.
  • Power Supplies: Redundant and energy-efficient power solutions.
  • Processors: Intel Xeon CPUs for maximum compute power.

Built for enterprise workloads, virtualization, and cloud computing, these components ensure maximum efficiency and reliability in your DL360 Gen10 server.

Need a specific HPE DL360 Gen10 part? Browse our selection or contact us for assistance.

Unique Options

Risers

Performance Cooling Options

Universal Media Bay Options

Optical Drive Options

System Insight Display Options

Rear Drive Option Kit

10 NVMe chassis Upgrade Kit

HPE DL360 Gen10 10SFF Premium Backplane Kit thumb
NOTE: This kit is supported on the 8SFF model only.
$1,849
$1,250.00

Security

Cable Kits

Memory

For new Gen10 memory population rule whitepaper and optimal memory performance guidelines, please go to:
For Gen10 memory speed table, please go to: (link)
For memory Reliability, Accessibility, Serviceability (RAS) features whitepaper like Gen10 Fast Fault Tolerance and legacy mirrored memory feature etc. please go to: (link)
Notes:
- Maximum memory capacity and speed per processor is dependent on processor model selection or limitation.
- DDR4-2933 Memory Kits are only supported with 2nd Generation Intel Xeon Scalable Series Processors and DDR4-2666 Memory Kits are only supported with 1st Generation Intel Xeon Scalable Series Processors.

HPE DDR4 Memory

Registered DIMMs (RDIMMs) for 2nd Generation Intel Xeon Scalable Series

Registered DIMMs (RDIMMs) for 1st Generation Intel Xeon Scalable Series

Load Reduced DIMMs (LRDIMMs) for 2nd Generation Intel Xeon Scalable Series

Load Reduced DIMMs (LRDIMMs) for 1st Generation Intel Xeon Scalable Series

HPE Persistent Memory

Notes:
- A maximum of 12 HPE Persistent Memory Kits supported on the following 2nd Generation Intel Xeon Scalable Processor series (Platinum 8200, Gold 6200, Gold 5200, Silver 4215 and 4215R)
-- For additional information regarding HPE Persistent Memory Population Rules- and Guidelines for Gen10- visit:- (link)

HPE Persistent Memory (NVDIMM)

Notes:
- Can only be mixed with RDIMMs.
- A maximum of 12 NVDIMMs supported with 1st generation Intel Xeon Scalable processors.
-- For General Server Memory and NVDIMM Population Rules and Guidelines for Gen10 see details here:- (link)

Drives

Hard Disk Drives - 2.5in SFF SAS

Hard Disk Drives - 2.5in SFF SATA

Hard Disk Drives - 3.5in LFF SAS

Hard Disk Drives - 3.5in LFF SATA

Solid State Drives - 2.5in SFF SAS

For SSD selection guidance, please visithttps://ssd.hpe.com/

Read Intensive - 12G SAS - SFF - SSD

Mixed Use - 12G SAS - SFF - SSD

Write Intensive - 12G SAS - SFF - SSD

Read Intensive - 12G Value SAS - SFF - SSD

Mixed Use - 12G Value SAS - SFF - SSD

Very Read Optimized - 6G SATA - SFF - SSD

Solid State Drives - 2.5in SFF SATA

Read Intensive - 6G SATA - SFF - SSD

Mixed Use - 6G SATA - SFF - SSD

Solid State Drives - 3.5in LFF SAS

Solid State Drives - 3.5in LFF SATA

Solid State Drives - NVMe

Read Intensive - PCIe/NVMe - SFF - SSD

Notes:NVMe SSDs not supported on Xeon-Gold 6250L or Gold 6250 processor based configurations.

Mixed Use - PCIe/NVMe - SFF - SSD

Notes:NVMe SSDs not supported on Xeon-Gold 6250L or Gold 6250 processor based configurations.

Write Intensive- PCIe/NVMe - SFF - SSD

Solid State Drives - SATA M.2

Read Intensive - 6G SATA - M.2 UFF to SFF - SSD

HPE Dual 240GB SATA 6G Read Intensive M.2 to SFF SCM 5300B SSD Kit thumb
Notes:SCM dual drive functionality only supported on HPE DL360 Gen10 1SFF SAS/SATA Rear Backplane (867972-B21) or HPE DL360 Gen10 2SFF SATA UFF Backplane Kit (867970-B21). Installation on any other bay will only show one M.2 drive per bay.
$1,260
$985.00

Read Intensive - 6G SATA - M.2 - Solid State Media (2280 type)

Internal - 6G SATA - Dual M.2 Enabling Kits

HPE Universal SATA 6G AIC HHHL M.2 SSD Enablement Kit thumb
Notes:The Universal SATA M.2 Kit above will require a PCIe slot and support up to two of the same M.2 media cards.
$358
$299.00
HPE DL360 Gen10 SATA M.2 2280 Riser Kit thumb
Notes:The DL360 SATA M.2 Riser Kit above is part of the Primary Riser so it will not take up a PCIe slot and will support up to two of the same 2280 M.2 media cards.
$384
$295.00

Storage Controllers

Smart Array Guide

HPE Flexible Smart Array Controllers

HPE Smart Array Controllers

Networking

100 Gigabit Ethernet adapters

HPE Ethernet 100Gb 1-port 842QSFP28 Adapter thumb
pdf icon Quickspecs for 874253-B21 - 1 ports - SFP28 - 100 Gb - PCI Express 3.0 x16
$487
$348.00

25 Gigabit Ethernet adapters

$207
$156.00
$385
$275.00
$585
$418.00

10 Gigabit Ethernet adapters

1 Gigabit Ethernet adapters

HPE Ethernet 1Gb 4-port 366T Adapter<br><img src='/images/bestseller.gif' alt='best seller' width='91' height='12'> thumb
pdf icon Quickspecs for 811546-B21 - 4 ports - RJ-45 - 10/100/1000 - PCI Express 2.1 x4
$349
$249.00
HPE Ethernet 1Gb 4-port 331T Adapter<br><img src='/images/bestseller.gif' alt='best seller' width='91' height='12'> thumb
pdf icon Quickspecs for 647594-B21 - 4 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x4
$145
$98.00
HPE Ethernet 1Gb 2-port 361T Adapter thumb
pdf icon Quickspecs for 652497-B21 - 2 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x4
$185
$128.00
HPE Ethernet 1Gb 2-port 332T Adapter<br><img src='/images/bestseller.gif' alt='best seller' width='91' height='12'> thumb
pdf icon Quickspecs for 615732-B21 - 2 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x1
$84
$59.00

FlexibleLOM Adapters

HPE InfiniBand

Power Supplies

HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to 'right-size' a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid 'trapped' power capacity in the data center.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool.
For information on power specifications and technical content visit HPE Server power supplies.

HPE Flex Slot Hot-plug Power supplies

Rack Options

Rail Kits

HPE 1U Cable Management Arm for Rail Kit thumb
NOTE: Supports both the Easy Install and Ball Bearing Rail Kits.
$151
$108.00
NOTE: HPE rail kits contain telescoping rails which allow for in-rack serviceability.
NOTE: Hewlett Packard Enterprise recommends that a minimum of two people are required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.

Processors

NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit.
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
Notes:
­Field upgrades from 1st Generation processors (x1xx) to 2nd Generation processors (x2xx) not supported.
­Upgrades to two processors must be performed by HPE Pointnext or an approved Service Delivery Partner.
­Mixing of 2 different processor models is not supported.
­For first processor,-L21 kit will include 5 fans. With the exception of Xeon-Gold 6256, Gold 6250L, Gold 6250, Gold 6212U, Gold 6210U, Gold 6209U & Gold 6208U processors, -B21 kits include 2 fans (for 4 LFF and 8 SFF CTO Server, 10 NVMe CTO Server always includes 7 High Performance fans).
­Processors with 130W or higher will ship with the High Performance heat sink plus SKUs 8256, 5222, 8156, 6128, 5122 as noted below. All other processors will ship with the Standard heat sink.
­When 2nd Generation Intel Xeon Scalable Processor is slected, then only DDR4-2933 Memory Kit can be selected; When 1st Generation Intel Xeon Scalable Processor is selected, then only DDR4-2666 Memory Kit can be selected

2nd Generation Intel Xeon CPU

2nd Generation Platinum CPU

Intel Xeon-Platinum 8260Y (2.4GHz/24-core/165W) Processor Kit for HPE ProLiant DL360 Gen10 thumb
Notes:
-24/20/16 cores would result in 2.4/2.5/2.7 GHz operating points
-Ships with High Performance Heatsink.
$12,335
$9,653.00

2nd Generation Gold CPU

Intel Xeon-Gold 6256 (3.6GHz/12-core/205W) Processor Kit for HPE ProLiant DL360 Gen10 thumb
Notes:
-Ships with High Performance Heatsink.
-Ambient temperature support up to 30C.
-High performance fans are required.
$7,273
$5,195.00
Intel Xeon-Gold 6250L (3.9GHz/8-core/185W) Processor Kit for HPE ProLiant DL360 Gen10 thumb
Notes:
-Ships with High Performance Heatsink.
-NVMe SSDs not supported with this processor.
-Not supported on Premium 10SFF NVMe chassis.
-Ambient temperature support up to 25C on 4LFF and 8SFF configurations. 2SFF cages not supported.
-High performance fans are required.
$9,713
$7,601.00
Intel Xeon-Gold 6250 (3.9GHz/8-core/185W) Processor Kit for HPE ProLiant DL360 Gen10 thumb
Notes:
-Ships with High Performance Heatsink.
-NVMe SSDs not supported with this processor.
-Not supported on Premium 10SFF NVMe chassis.
-Ambient temperature support up to 25C on 4LFF and 8SFF configurations. 2SFF cages not supported.
-High performance fans are required.
$6,153
$4,395.00
Intel Xeon-Gold 6240Y (2.6GHz/18-14-8-core/150W) Processor Kit for HPE ProLiant DL360 Gen10 thumb
Notes:
-18/14/8 cores would result in 2.6/2.8/3.1 GHz operating points
-Ships with High Performance Heatsink.
$6,274
$4,910.00
Intel Xeon-Gold 6212U (2.4GHz/24-core/165W) Processor Kit for HPE ProLiant DL360 Gen10 thumb
Notes:
-Ships with High Performance Heatsink.
-Only supported in single socket configurations.
$3,583
$2,804.00
Intel Xeon-Gold 6210U (2.5GHz/20-core/150W) Processor Kit for HPE ProLiant DL360 Gen10 thumb
Notes:
-Ships with High Performance Heatsink.
-Only supported in single socket configurations.
$2,134
$1,670.00
$1,985
$1,553.00
Intel Xeon-Gold 6208U (2.9GHz/16-core/150W) Processor Kit for HPE ProLiant DL360 Gen10 thumb
Notes:
-Ships with High Performance Heatsink.
-Only supported in single socket configurations.
$1,985
$1,553.00
Intel Xeon-Gold 5218B (2.3GHz/16-core/125W) Processor Kit for HPE ProLiant DL360 Gen10 thumb
Notes:Consistent features with the 5218 processor but from a different die. Mixing both 5218B & 5218 in a system is not supported
$2,364
$1,850.00

2nd Generation Silver CPU

2nd Generation Bronze CPU

1st Generation Intel Xeon CPU

1st Generation Platinum CPU

Intel Xeon-Platinum 8165 (2.3GHz/24-core/205W) Processor Kit for HPE ProLiant DL360 Gen10 thumb
Notes:
-Ships with Performance Heatsink.
-Requires the High Performance Fan Kit (871244-B21)Notes:Supports Core boosting
--Learn more-(link)
-To enable this feature an iLO Advanced, or iLO Advanced Premium Security edition License are required.
$18,510
$14,407.00

1st Generation Gold CPU

Intel Xeon-Gold 6143 (2.8GHz/16-core/205W) Processor Kit for HPE ProLiant DL360 Gen10 thumb
Notes:
-Ships with Performance Heatsink.
-Requires the High Performance Fan Kit (871244-B21)
-Supports Core boosting Learn morehttp://www.hpe.com/info/ist.
-To enable this feature an iLO Advanced, or iLO Advanced Premium Security edition License are required.
$15,425
$12,006.00

1st Generation Silver CPU

1st Generation Bronze CPU

Compare Selected