HP ProLiant DL360 Gen10 Parts

Unique Options
Risers
HPE DL360 Gen10 2P Full Height Riser and GPU Enablement Kit
NOTE: This kit is not available on the 10 NVMe model.
Riser Information
NOTE: See DL360 Gen10 QuickSpecs for Riser Information
Performance Cooling Options
Universal Media Bay Options
HPE DL360 Gen10 8SFF Display Port/USB/Optical Drive Blank Kit
NOTE: This kit is required for Optical Drive option (8SFF model only).
Optical Drive Options
HPE Mobile USB Non Leaded System DVD RW Drive
NOTE: This kit is only supported on USB 3.0 ports only.
$361.00 $255.00
HPE DL360 Gen9 LFF Optical Cable
NOTE: This kit is required for Optical Drive option (4LFF model only).
System Insight Display Options
Rear Drive Option Kit
10 NVMe chassis Upgrade Kit
HPE DL360 Gen10 10SFF Premium Backplane Kit
NOTE: This kit is supported on the 8SFF model only.
Security
Cable Kits
Back to top
Processors
NOTE: For first processor, -L21 will include 5 fans, for second processor, -B21 will add 2 additional fans (for 4 LFF and 8 SFF chassis). 10 NVMe chassis will always get 7 High Performane fans regardless of 1 or 2 processors.
NOTE: Maximum memory capacity per processor is dependent on processor models. All processors support up to 768 GB max memory per processor except
NOTE: Mixing of 2 different processor models are NOT allowed.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: Processors with 130W or higher will ship with the High Performance heat sink plus SKUs 8156, 6128, 5122 as noted below. All other will processors will ship with the Standard heat sink.
Back to top
Memory
For new Gen10 memory population rule whitepaper and optimal memory performance guidelines, please go to:
For Gen10 memory speed table, please go to:
For memory Reliability, Accessibility, Serviceability (RAS) features whitepaper like Gen10 Fast Fault Tolerance and legacy mirrored memory feature etc. please go to:
NOTE: Maximum memory capacity per processor is dependent on processor model selection or limitation.
NOTE: Maximum memory speed is dependent on processor model selection or limitation.
NOTE: A maximum of 12 NVDIMMs can be supported.
DDR4 Memory
Registered DIMMs (RDIMMs)
Load Reduced DIMMs (LRDIMMs)
Back to top
Drives
Enterprise - 12G SAS - SFF Drives
Midline 6G SATA - SFF Drives
Midline - 12G SAS - LFF Drives
Midline - 12G SAS - SFF Drives
Read Intensive - 12G SAS - SFF - Solid State Drives
Mixed Use - 12G SAS - SFF - Solid State Drives
Write Intensive - 12G SAS - SFF - Solid State Drives
Mixed Use - 12G SAS - LFF - Solid State Drives
Write Intensive - 6G SATA - SFF - Solid State Drives
Write Intensive - 6G SATA - LFF - Solid State Drives
Read Intensive - PCIe/NVMe - SFF - Solid State Drives
Read Intensive - SATA - SFF - Solid State Drives
Read Intensive - SATA - LFF - Solid State Drives
Mixed Use - PCIe/NVMe - SFF - Solid State Drives
Mixed Use - SATA - SFF - Solid State Drives
Mixed Use - SATA - LFF - Solid State Drives
Internal Dual M.2 Kit
HPE Universal SATA HHHL 3yr Wty M.2 Kit
NOTE: The Universal SATA M.2 Kit above will require a PCIe slot and support up to two of the same M.2 cards below.
HPE DL360 Gen10 SATA M.2 2280 Riser Kit
NOTE: The DL360 SATA M.2 Riser Kit above is part of the Primary Riser so it will not take up a PCIe slot and will support up to two of the same M.2 cards below.
Read Intensive - M.2 - Solid State Drives (2280 type)
Mixed Use - M.2 - Solid State Drives (2280 type)
External Dual uFF M.2 Kit
HPE Dual 480GB SATA Read Intensive M.2 - UFF to SFF SCM 3yr Wty Digitally Signed Firmware SSD
NOTE: The Dual uFF Kits above includes the SCM carrier plus 2x integrated M.2 cartridges
Hard Drive Blank Kits
Back to top
Networking
25 Gigabit Ethernet adapters
10 Gigabit Ethernet adapters
1 Gigabit Ethernet adapters
FlexibleLOM Adapters
Back to top
Computation and Graphics Accelerato
HPE Computation and Graphics Accelerators
HPE DL360 Gen10 GPU CPU1 Cable Kit
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for additional information.
Embedded Management
HPE iLO Advanced
HPE iLO Scale-Out
Back to top
Storage Controllers
NOTE: For additional details, please see HPE Smart Array Gen10 Controllers Data Sheet at:
HPE Flexible Smart Array Controllers
HPE Smart Array Controllers
HPE Smart Array E208i-p SR Gen10 (8 Internal Lanes/No Cache) 12G SAS PCIe Plug-in Controller
NOTE: The Low Height (LH) controller is only needed when a second GPU is installed (CPU2).
Back to top
Rack Options
Rail Kits
HPE 1U Cable Management Arm for Easy Install Rail Kit
NOTE: Supports both the Easy Install and Ball Bearing Rail Kits.
HPE 1U Gen10 LFF Ball Bearing Rail Kit
NOTE: HPE rail kits contain telescoping rails which allow for in-rack serviceability.
NOTE: Hewlett Packard Enterprise recommends that a minimum of two people are required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation
Back to top

Last updated: 11/24/2017

Need help finding the correct part? Live Chat operators are standing by. LET US HELP