DG0300FARVV is the HPE model number for 300GB 2.5" SFF 6G Dual Port SAS 10K RPM Hot Plug Hard Drive. This is the number printed on the drive label itself, so it is what you will read off a pulled drive or see reported by a controller utility, rather than the number on the original shipping box. The drive is a 2.5-inch low profile SAS unit running at 10,000 rpm with a 6 Gb/s dual port interface, supplied hot-plug with its tray attached. Physical dimensions are 0.591" high by 2.75" wide. If you are matching a label number to an orderable HPE part, the cross-reference block on this page maps it.
HPE Option Part #: 507127-B21
HPE Spare Part #: 507284-001
HPE Model #: DG0300FAMWN, DG0300FARVV, EG000300JWBHR, EG000300JWEBF, EG000300JWFUQ, EG0300FARTT, EG0300FAWHV, EG0300FAWJD, EG0300FBDBR, EG0300FBDSP, EG0300FBLSE, EG0300FBVFL, EG0300FCSPH, EG0300FCVBF, EG0300JEHLV, EG0300JFCKA
HPE Assembly Part #: 507119-002, 507119-004, 518011-002, 518194-002, 518194-004, 597609-001, 599476-001, 619286-001, 641552-001, 689287-001, 693569-001
PRODUCT SPECIFICATIONS FOR DG0300FARVV:
- Hard Drive Capacity: 300GB
- Generation: SAS
- External Data Transfer Rate: 6 Gb/s
- Rotational Speed: 10,000 rpm
- Form Factor (Drive): 2.5-inch low profile
- Interface: SAS (Serial Attached SCSI)
- Data Storage Device Type: SAS (Serial Attached SCSI) device
- Hard Drive Device Type: Hard drive for server/storage unit (Hot-plug)
- Height: 0.591"
- Width: 2.75"
- Hotswap Tray: Included (Attached)
COMPATIBLE WITH:
PROLIANT BL SERIES
PROLIANT DL SERIES
PROLIANT SL SERIES
PROLIANT WS SERIES
** This list may not be complete. Contact us via Live Chat if you have any questions about compatibility.
FREQUENTLY ASKED QUESTIONS ABOUT DG0300FARVV
What is the difference between DG0300FARVV, 507127-B21 and 507284-001?
They identify the same physical 300GB 6G SAS 10K drive at different points in HPE's numbering. DG0300FARVV, this page, is a model number printed on the drive label. 507127-B21 is the option part number used to order the drive as a boxed product. 507284-001 is the spare part number used for service replacement. This family also includes 11 assembly revisions, 15 OEM drive models, two generic part numbers and one alternate part number, all listed in the cross-reference block.
What is an assembly part number, and what is an OEM model number?
An assembly part number identifies a specific build revision of the finished drive assembly, including the tray and any firmware or supplier changes made during the product's life. An OEM model number is the drive manufacturer's own designation for the mechanism, which is what appears on the label and in controller output. Both categories point to the same 300GB 6G SAS 10K hot-plug drive described on this page, and both appear in the cross-reference block.
I pulled a drive labelled DG0300FARVV. Will another number from the cross-reference block work as a replacement?
Yes. Every number shown in the cross-reference block refers to the same physical product: a 300GB 2.5-inch low profile SAS hard drive, 6 Gb/s dual port, 10,000 rpm, hot-plug with tray attached. Label numbers vary because HPE sourced the mechanism across multiple revisions and suppliers. Match on the specification and the cross-reference entry rather than expecting the pulled drive's label number to be the only valid one.
Which HPE servers accept this drive?
Supported platforms include BL20p G4, BL25p G2, BL45p G2, BL460c G1/G5/G6/G7, BL465c G1/G5/G6/G7, BL480c, BL620c G7, BL680c G5/G7, BL685c G1/G5/G6/G7, BL860c, BL870c, DL1000, DL120 G7, DL160 G6, DL160se G6, DL165 G7, DL170e G6, DL170h G6, DL180 G6, DL320 G6, DL360 G4p/G5/G6/G7, DL365 G1/G5, DL370 G6, DL380 G4/G5/G6/G7, DL385 G1/G2/G5/G5p/G6/G7, DL580 G3/G4/G5/G7, DL585 G1/G2/G5/G6/G7, DL785 G5/G6, DL980 G7, ML350 G5/G6, ML370 G4/G5/G6, ML570 G3/G4, SL390s G7 and WS460c G6.
Does DG0300FARVV include a carrier?
Yes. The hot-swap tray is included and attached to the drive, so it installs directly into an SFF bay on a supported server without transferring a caddy from another drive. The drive measures 0.591 inches high and 2.75 inches wide in the 2.5-inch low profile form factor, and is classified as a hot-plug hard drive for server and storage unit use.
HPE PARTSURFER INFO FOR DG0300FARVV (507127-B21)
| Spare PN | Description | |
|---|---|---|
 | 507284-001 | 300GB SAS hard disk drive - 6Gb/sec transfer rate, 10,000 RPM, 2.5-inch small form factor (SFF), hot plug (HP), dual-port (DP) - For use with Gen7 or earlier models |
Last Updated: 2026-11-06
- Trusted by thousands. Over 36,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local government agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 4 PM ET the same day and offers NEXT DAY delivery to US customers.
This product is warrantied against hardware failure for a period of 3 Years from the date of purchase. Before making a purchase, please take a moment to review our return policy below.
Returns
It is the customer's responsibility to verify compatibility with their machine(s) before placing an order. If an item is ordered by mistake, it can be returned for refund, minus a 25% restocking fee, within 5 business days of receipt. The cost of freight is not refundable.
Please be aware that factory-sealed equipment can only be returned if it remains unopened.
Defective Products
If you have received a defective part and your machine is still within the HPE warranty period, please initiate a warranty exchange by visiting the HPE Enterprise Support Center. Be sure to have the serial numbers of the defective drive and your server/storage array handy.
In case your hardware becomes defective during the Global One warranty period, but the HPE warranty has expired, you can return the product to us for a working replacement. You are responsible for the shipment of returned merchandise. However, we will cover the expense of Ground /Economy shipment for the replacement item(s).
Requesting an RMA
To initiate a return or warranty claim, please complete and submit the RMA Request Form.
