EG0300FAWJD is the HPE model number for 300GB 2.5" SFF 6G Dual Port SAS 10K RPM Hot Plug Hard Drive. This is the number printed on the drive label itself, so it is what you will read off a drive pulled from a chassis or find in a controller's inventory output. It identifies a 300GB 10,000 rpm SAS drive with a 6 Gb/s interface in a 2.5-inch low profile form factor, supplied with its hot-plug tray attached. HPE labels the same physical drive under several model numbers depending on the manufacturer that built it, and each maps back to the same HPE option and spare numbers used for ordering.
HPE Option Part #: 507127-B21
HPE Spare Part #: 507284-001
HPE Model #: DG0300FAMWN, DG0300FARVV, EG000300JWBHR, EG000300JWEBF, EG000300JWFUQ, EG0300FARTT, EG0300FAWHV, EG0300FAWJD, EG0300FBDBR, EG0300FBDSP, EG0300FBLSE, EG0300FBVFL, EG0300FCSPH, EG0300FCVBF, EG0300JEHLV, EG0300JFCKA
HPE Assembly Part #: 507119-002, 507119-004, 518011-002, 518194-002, 518194-004, 597609-001, 599476-001, 619286-001, 641552-001, 689287-001, 693569-001
PRODUCT SPECIFICATIONS FOR EG0300FAWJD:
- Hard Drive Capacity: 300GB
- Generation: SAS
- External Data Transfer Rate: 6 Gb/s
- Rotational Speed: 10,000 rpm
- Form Factor (Drive): 2.5-inch low profile
- Interface: SAS (Serial Attached SCSI)
- Data Storage Device Type: SAS (Serial Attached SCSI) device
- Hard Drive Device Type: Hard drive for server/storage unit (Hot-plug)
- Height: 0.591"
- Width: 2.75"
- Hotswap Tray: Included (Attached)
COMPATIBLE WITH:
PROLIANT BL SERIES
PROLIANT DL SERIES
PROLIANT SL SERIES
PROLIANT WS SERIES
** This list may not be complete. Contact us via Live Chat if you have any questions about compatibility.
FREQUENTLY ASKED QUESTIONS ABOUT EG0300FAWJD
What is the difference between EG0300FAWJD, 507127-B21 and 507284-001?
All three refer to the same physical drive. EG0300FAWJD, the subject of this page, is a model number: the identifier on the drive label. 507127-B21 is the HPE option number, the number used to order the drive as a boxed product. 507284-001 is the spare number, used for service replacement. This family also includes 11 assembly revisions, 15 OEM drive models, two generic part numbers and one alternate part number, all listed in the cross-reference block on this page.
What is an assembly part number, and what is an OEM model number?
An assembly part number identifies a specific build revision of the drive assembly, including the tray and firmware level, and increments as HPE releases revised builds of the same product. An OEM model number, such as EG0300FAWJD, is the identifier applied by the drive manufacturer under HPE specification and appears on the drive label. Both categories are represented in this family and all resolve to the same 300GB 6G SAS 10K drive.
What are the physical and interface specifications of EG0300FAWJD?
It is a 300GB hard drive with a 10,000 rpm rotational speed and a dual port SAS (Serial Attached SCSI) interface running at an external data transfer rate of 6 Gb/s. The form factor is 2.5-inch low profile SFF, measuring 0.591 inches high and 2.75 inches wide. It is a hot-plug drive for server and storage use, and the hot-swap tray is included and attached.
Which HPE servers accept this drive?
Supported systems include ProLiant BL20p G4, BL25p G2, BL45p G2, BL460c G1/G5/G6/G7, BL465c G1/G5/G6/G7, BL480c, BL620c G7, BL680c G5/G7, BL685c G1/G5/G6/G7, BL860c, BL870c, DL1000, DL120 G7, DL160 G6, DL160se G6, DL165 G7, DL170e G6, DL170h G6, DL180 G6, DL320 G6, DL360 G4p/G5/G6/G7, DL365 G1/G5, DL370 G6, DL380 G4/G5/G6/G7, DL385 G1/G2/G5/G5p/G6/G7, DL580 G3/G4/G5/G7, DL585 G1/G2/G5/G6/G7, DL785 G5/G6, DL980 G7, ML350 G5/G6, ML370 G4/G5/G6, ML570 G3/G4, SL390s G7 and WS460c G6.
HPE PARTSURFER INFO FOR EG0300FAWJD (507127-B21)
| Spare PN | Description | |
|---|---|---|
 | 507284-001 | 300GB SAS hard disk drive - 6Gb/sec transfer rate, 10,000 RPM, 2.5-inch small form factor (SFF), hot plug (HP), dual-port (DP) - For use with Gen7 or earlier models |
Last Updated: 2026-07-22
- Trusted by thousands. Over 36,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local government agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 4 PM ET the same day and offers NEXT DAY delivery to US customers.
This product is warrantied against hardware failure for a period of 3 Years from the date of purchase. Before making a purchase, please take a moment to review our return policy below.
Returns
It is the customer's responsibility to verify compatibility with their machine(s) before placing an order. If an item is ordered by mistake, it can be returned for refund, minus a 25% restocking fee, within 5 business days of receipt. The cost of freight is not refundable.
Please be aware that factory-sealed equipment can only be returned if it remains unopened.
Defective Products
If you have received a defective part and your machine is still within the HPE warranty period, please initiate a warranty exchange by visiting the HPE Enterprise Support Center. Be sure to have the serial numbers of the defective drive and your server/storage array handy.
In case your hardware becomes defective during the Global One warranty period, but the HPE warranty has expired, you can return the product to us for a working replacement. You are responsible for the shipment of returned merchandise. However, we will cover the expense of Ground /Economy shipment for the replacement item(s).
Requesting an RMA
To initiate a return or warranty claim, please complete and submit the RMA Request Form.
