689287-001 is the HPE assembly part number supplied in HPE option kit 507127-B21 for 300GB 2.5" SFF 6G Dual Port SAS 10K RPM Hot Plug Hard Drive. If you are reading this number off a drive label or an HPE PartSurfer result, it identifies a 300GB 10,000 rpm SAS hard drive with a 6 Gb/s interface in a 2.5-inch low profile form factor. The drive is a hot-plug unit for server and storage use and ships with its hot-swap tray attached. Physical dimensions are 0.591" high and 2.75" wide. Dual port SAS connectivity is standard on this drive.
HPE Option Part #: 507127-B21
HPE Spare Part #: 507284-001
HPE Model #: DG0300FAMWN, DG0300FARVV, EG000300JWBHR, EG000300JWEBF, EG000300JWFUQ, EG0300FARTT, EG0300FAWHV, EG0300FAWJD, EG0300FBDBR, EG0300FBDSP, EG0300FBLSE, EG0300FBVFL, EG0300FCSPH, EG0300FCVBF, EG0300JEHLV, EG0300JFCKA
HPE Assembly Part #: 507119-002, 507119-004, 518011-002, 518194-002, 518194-004, 597609-001, 599476-001, 619286-001, 641552-001, 689287-001, 693569-001
PRODUCT SPECIFICATIONS FOR 689287-001:
- Hard Drive Capacity: 300GB
- Generation: SAS
- External Data Transfer Rate: 6 Gb/s
- Rotational Speed: 10,000 rpm
- Form Factor (Drive): 2.5-inch low profile
- Interface: SAS (Serial Attached SCSI)
- Data Storage Device Type: SAS (Serial Attached SCSI) device
- Hard Drive Device Type: Hard drive for server/storage unit (Hot-plug)
- Height: 0.591"
- Width: 2.75"
- Hotswap Tray: Included (Attached)
COMPATIBLE WITH:
PROLIANT BL SERIES
PROLIANT DL SERIES
PROLIANT SL SERIES
PROLIANT WS SERIES
** This list may not be complete. Contact us via Live Chat if you have any questions about compatibility.
FREQUENTLY ASKED QUESTIONS ABOUT 689287-001
What is the difference between 689287-001, 507127-B21 and 507284-001?
All three identify the same physical drive. This page, 689287-001, is an assembly part number — the number HPE assigns to the built drive as it leaves manufacturing, and the number most often printed on the drive label. 507127-B21 is the option kit number used to order the drive as a boxed product. 507284-001 is the spare part number used for service replacement. This family also includes ten further assembly revisions, 16 OEM drive models, two generic part numbers and one alternate part number, all listed in the cross-reference block on this page.
Which kit do I need — 507127-B21 or 652564-B21?
652564-B21 is an Enterprise product line kit using the SC carrier and supporting Gen8, Gen9 and Gen10 servers. 507127-B21 is the kit associated with this assembly number and covers the earlier server list shown on this page, including ProLiant G4 through G7 models. Choose based on your chassis generation and drive carrier style, and confirm against the compatibility list on each kit's page before ordering.
I have an OEM model number on the label instead — is that the same drive?
Likely yes. An OEM model number is the drive manufacturer's own identifier for the mechanism HPE qualified and sells under its own part numbers. Sixteen OEM model numbers map to this same 300GB 6G SAS 10K drive, and they appear in the cross-reference block on this page. If the number on your label matches one of them, the drive is functionally the same as 689287-001.
Which servers does 689287-001 fit?
This drive is supported in a broad range of HPE ProLiant and BladeSystem servers, including BL460c G1/G5/G6/G7, BL465c G1/G5/G6/G7, BL685c G1/G5/G6/G7, DL360 G4p/G5/G6/G7, DL380 G4/G5/G6/G7, DL385 G1/G2/G5/G5p/G6/G7, DL580 G3/G4/G5/G7, DL585 G1/G2/G5/G6/G7, DL980 G7, ML350 G5/G6, ML370 G4/G5/G6 and ML570 G3/G4, plus DL160 G6, DL180 G6, DL320 G6, SL390s G7 and WS460c G6. Check the full list on this page against your model.
Does 689287-001 include a drive carrier?
Yes. The hot-swap tray is included and attached to the drive, so the unit is ready to install in a supported hot-plug bay without transferring hardware from another drive. The drive measures 0.591" high and 2.75" wide in the 2.5-inch low profile form factor. Confirm that your server chassis uses the same carrier style before installation.
HPE PARTSURFER INFO FOR 689287-001 (507127-B21)
| Spare PN | Description | |
|---|---|---|
 | 507284-001 | 300GB SAS hard disk drive - 6Gb/sec transfer rate, 10,000 RPM, 2.5-inch small form factor (SFF), hot plug (HP), dual-port (DP) - For use with Gen7 or earlier models |
Last Updated: 2026-07-22
- Trusted by thousands. Over 36,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local government agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 4 PM ET the same day and offers NEXT DAY delivery to US customers.
This product is warrantied against hardware failure for a period of 3 Years from the date of purchase. Before making a purchase, please take a moment to review our return policy below.
Returns
It is the customer's responsibility to verify compatibility with their machine(s) before placing an order. If an item is ordered by mistake, it can be returned for refund, minus a 25% restocking fee, within 5 business days of receipt. The cost of freight is not refundable.
Please be aware that factory-sealed equipment can only be returned if it remains unopened.
Defective Products
If you have received a defective part and your machine is still within the HPE warranty period, please initiate a warranty exchange by visiting the HPE Enterprise Support Center. Be sure to have the serial numbers of the defective drive and your server/storage array handy.
In case your hardware becomes defective during the Global One warranty period, but the HPE warranty has expired, you can return the product to us for a working replacement. You are responsible for the shipment of returned merchandise. However, we will cover the expense of Ground /Economy shipment for the replacement item(s).
Requesting an RMA
To initiate a return or warranty claim, please complete and submit the RMA Request Form.
