619286-001 is the HPE assembly part number supplied in HPE option kit 507127-B21 for 300GB 2.5" SFF 6G Dual Port SAS 10K RPM Hot Plug Hard Drive. If you are reading this number off a drive label or an HPE PartSurfer listing, it identifies the assembled drive as HPE built it: a 300GB 10,000 rpm SAS hard drive with a 6 Gb/s dual port interface, in a 2.5-inch low profile form factor measuring 0.591" high by 2.75" wide. The hot-plug carrier tray is included and attached. Assembly numbers like this one appear on the physical unit rather than on the orderable kit box, so label-to-order matching often requires a cross-reference.
HPE Option Part #: 507127-B21
HPE Spare Part #: 507284-001
HPE Model #: DG0300FAMWN, DG0300FARVV, EG000300JWBHR, EG000300JWEBF, EG000300JWFUQ, EG0300FARTT, EG0300FAWHV, EG0300FAWJD, EG0300FBDBR, EG0300FBDSP, EG0300FBLSE, EG0300FBVFL, EG0300FCSPH, EG0300FCVBF, EG0300JEHLV, EG0300JFCKA
HPE Assembly Part #: 507119-002, 507119-004, 518011-002, 518194-002, 518194-004, 597609-001, 599476-001, 619286-001, 641552-001, 689287-001, 693569-001
PRODUCT SPECIFICATIONS FOR 619286-001:
- Hard Drive Capacity: 300GB
- Generation: SAS
- External Data Transfer Rate: 6 Gb/s
- Rotational Speed: 10,000 rpm
- Form Factor (Drive): 2.5-inch low profile
- Interface: SAS (Serial Attached SCSI)
- Data Storage Device Type: SAS (Serial Attached SCSI) device
- Hard Drive Device Type: Hard drive for server/storage unit (Hot-plug)
- Height: 0.591"
- Width: 2.75"
- Hotswap Tray: Included (Attached)
COMPATIBLE WITH:
PROLIANT BL SERIES
PROLIANT DL SERIES
PROLIANT SL SERIES
PROLIANT WS SERIES
** This list may not be complete. Contact us via Live Chat if you have any questions about compatibility.
FREQUENTLY ASKED QUESTIONS ABOUT 619286-001
What is the difference between 619286-001, 507127-B21 and 507284-001?
All three identify the same physical 300GB SAS drive. This page, 619286-001, is an assembly part number: the number HPE assigns to the built drive-plus-carrier unit, which is what you typically see on the label. 507127-B21 is the orderable option kit number. 507284-001 is the spare part number used for service replacement. This family also includes ten further assembly revisions, 16 OEM drive models, two generic part numbers and one alternate part number, all listed in the cross-reference block on this page. An OEM model number is the drive manufacturer's own designation for the mechanism inside the HPE carrier.
619286-001 ships in several HPE option kits — which one do I need?
This drive ships under option kits 507127-B21, 652564-B21 and AP875A. 652564-B21 is an Enterprise product line kit using the SC carrier and is listed as supporting Gen8, Gen9 and Gen10 servers. 507127-B21 and AP875A cover the earlier platforms in this drive's compatibility list. Check the compatibility list on each kit's page against your specific server model and generation before ordering, since carrier style and platform coverage determine which kit fits.
What are the physical and interface specifications of 619286-001?
It is a 300GB hard drive with a 10,000 rpm rotational speed and a SAS (Serial Attached SCSI) interface, dual ported, with a 6 Gb/s external data transfer rate. The form factor is 2.5-inch small form factor, low profile, measuring 0.591" in height and 2.75" in width. It is a hot-plug drive for server and storage use, and the hot-swap tray is included and attached to the drive.
Which HPE servers is this drive listed for?
Supported platforms include BladeSystem models such as BL20p G4, BL25p G2, BL45p G2, BL460c G1/G5/G6/G7, BL465c G1/G5/G6/G7, BL480c, BL620c G7, BL680c G5/G7, BL685c G1/G5/G6/G7, BL860c and BL870c; ProLiant DL models including DL1000, DL120 G7, DL160 G6, DL160se G6, DL165 G7, DL170e G6, DL170h G6, DL180 G6, DL320 G6, DL360 G4p/G5/G6/G7, DL365 G1/G5, DL370 G6, DL380 G4/G5/G6/G7, DL385 G1/G2/G5/G5p/G6/G7, DL580 G3/G4/G5/G7, DL585 G1/G2/G5/G6/G7, DL785 G5/G6 and DL980 G7; plus ML350 G5/G6, ML370 G4/G5/G6, ML570 G3/G4, SL390s G7 and WS460c G6.
HPE PARTSURFER INFO FOR 619286-001 (507127-B21)
| Spare PN | Description | |
|---|---|---|
 | 507284-001 | 300GB SAS hard disk drive - 6Gb/sec transfer rate, 10,000 RPM, 2.5-inch small form factor (SFF), hot plug (HP), dual-port (DP) - For use with Gen7 or earlier models |
Last Updated: 2026-07-22
- Trusted by thousands. Over 36,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local government agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 4 PM ET the same day and offers NEXT DAY delivery to US customers.
This product is warrantied against hardware failure for a period of 3 Years from the date of purchase. Before making a purchase, please take a moment to review our return policy below.
Returns
It is the customer's responsibility to verify compatibility with their machine(s) before placing an order. If an item is ordered by mistake, it can be returned for refund, minus a 25% restocking fee, within 5 business days of receipt. The cost of freight is not refundable.
Please be aware that factory-sealed equipment can only be returned if it remains unopened.
Defective Products
If you have received a defective part and your machine is still within the HPE warranty period, please initiate a warranty exchange by visiting the HPE Enterprise Support Center. Be sure to have the serial numbers of the defective drive and your server/storage array handy.
In case your hardware becomes defective during the Global One warranty period, but the HPE warranty has expired, you can return the product to us for a working replacement. You are responsible for the shipment of returned merchandise. However, we will cover the expense of Ground /Economy shipment for the replacement item(s).
Requesting an RMA
To initiate a return or warranty claim, please complete and submit the RMA Request Form.
