HPE ProLiant DL385 Gen10 Plus v2 Parts

The HPE ProLiant DL385 Gen10 Plus v2 is HPE's 2U, two-socket AMD platform — up to two EPYC 7003 Series processors, 32 DDR4 slots at 3200 MT/s, PCIe 4.0 expansion, and front ends from 8 SFF to 36 SFF or 20 LFF. Every part below is genuine HPE, available new and refurbished, and tested for compatibility before it ships. Live pricing for each part number appears in the tables further down this page.

DL385 Gen10 Plus v2 Platform at a Glance

• Processors: one or two AMD EPYC 7003 Series CPUs from 8 to 64 cores, plus three carried-over 7002 Series models (7402, 7302, 7252) — both sockets must hold the same model
• Memory: 32 DDR4 DIMM slots (16 per processor, 8 channels each, 2 DIMMs per channel) at up to 3200 MT/s — up to 8.0TB
• Storage: Basic Carrier bays — 8 SFF, 24 SFF (36 with mid-tray and rear cages), 8 LFF, or 12 LFF (20 with mid-tray and rear cages)
• Expansion: PCIe 4.0 — three slots standard on the primary riser, up to eight slots with a second processor
• Networking: no embedded network ports — one OCP 3.0 slot plus PCIe stand-up adapters
• Power: HPE Flex Slot hot-plug supplies, 500W through 1600W of usable output
• Management: HPE iLO 5 with Intelligent Provisioning

Check the carrier before you order drives. The DL385 Gen10 Plus v2 uses Basic Carrier drive cages, not the Smart Carrier cages fitted to the DL385 Gen10 Plus — they are separate models with separate option lists, so verify the part number against this server's QuickSpecs.

Full platform detail is in the official HPE DL385 Gen10 Plus v2 QuickSpecs.

Shop DL385 Gen10 Plus v2 Parts by Category

• DL385 Gen10 Plus v2 Memory — DDR4-3200 Registered Smart Memory from 8GB to 64GB
• DL385 Gen10 Plus v2 Drives — Basic Carrier NVMe, SAS, and SATA in SFF and LFF
• DL385 Gen10 Plus v2 Controllers — Smart Array SR Gen10, tri-mode MR and SR, and NS204i-p boot
• DL385 Gen10 Plus v2 Adapters — 1GbE to 200Gb in PCIe 4.0 and OCP 3.0
• DL385 Gen10 Plus v2 Power Supplies — Flex Slot Platinum and Titanium hot-plug PSUs
• DL385 Gen10 Plus v2 Processors — AMD EPYC 7003 CPUs with heat sink and fan kits

Comparing models? See DL385 Gen10 Plus parts, DL385 Gen11 parts, the single-socket DL325 Gen10 Plus v2 parts, our guide to how Gen10 and Gen11 compare, or browse all HPE parts by server model.

DL385 Gen10 Plus v2 Parts FAQ

What processors does the HPE ProLiant DL385 Gen10 Plus v2 support?
One or two AMD EPYC 7003 Series processors, from the 8-core 7203 up to the 64-core 7763, 7713, and 7773X, plus three 7002 Series models: the 7402, 7302, and 7252. Mixing two different processor models is not allowed.

How much memory does the DL385 Gen10 Plus v2 support?
Up to 8.0TB of DDR4 across 32 DIMM slots - 16 per processor, 8 channels per processor, 2 DIMMs per channel, at speeds up to 3200 MT/s. All 32 slots require both processors installed.

What drives does the DL385 Gen10 Plus v2 accept?
Hot-plug Basic Carrier SAS, SATA, and NVMe U.3 or U.2 drives. Chassis options run from 8 SFF up to 36 SFF (24 front plus 8 mid-tray plus 4 rear), or 8 LFF and 12 LFF up to 20 LFF.

Is the DL385 Gen10 Plus v2 the same server as the DL385 Gen10 Plus?
No - they are separate models with separate option lists. The QuickSpecs call out the clearest difference: the v2 uses Basic Carrier drive cages, while the DL385 Gen10 Plus uses Smart Carrier cages.

Does the DL385 Gen10 Plus v2 have onboard network ports?
No. The QuickSpecs list network ports as 'None. Choice of OCP or stand up card' - networking comes from the single OCP 3.0 slot or a PCIe adapter. A dedicated 1Gb iLO management port is standard at the rear.

Can I mix new and refurbished parts in the DL385 Gen10 Plus v2?
Yes. Genuine HPE parts perform identically whether new or refurbished, and refurbished stock is tested before shipping - a common way to add memory, drives, or a second power supply at lower cost.

✅ Looking for a specific DL385 Gen10 Plus v2 part? Browse our full selection below.

Why Global One?

• Trusted by thousands. Over 36,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
• HPE is our specialty! We only sell genuine HP Enterprise parts.
• EASY ordering process. Purchase online now with credit card or PayPal!
• FAST shipping. Global One Technology ships orders received by 4pm ET the same day and offers NEXT DAY delivery to US customers.