HP ProLiant DL380p Gen8 Parts

Unique Options
HP DL380p Gen8 Double Wide Graphic Processing Unit Drive Cage Kit
NOTE: Kit is required to support cards greater than 9.5", in the secondary position only
NOTE: Two 1200W Power supply kits and 2 processors are required for this riser
NOTE: This riser supports two single wide, or one double wide CPU option in the secondary riser position
NOTE: The double wide riser cage kit is not supported in the 8LFF, 12LFF and 25SFF Configuration Servers
HP DL380p Gen8 Double Wide Slot1 Riser Cage Kit
NOTE: Kit is required to support cards greater than 9.5", in the primary position only, and supports one double wide card and a single PCI card in this riser
NOTE: This riser supports one single wide, or one double wide GPU option in the primary riser position
NOTE: The double wide riser cage kit is not supported in the 8LFF, 12LFF and 25SFF Configuration Servers
HP DL380p Gen8 NEBS Conversion Cage Kit
NOTE: This conversion kit is only available for the 8SFF base server model.
NOTE: A NEBS conversion cage kit is required for each riser in an 8SFF base server for the server to meet NEBS and ETSI certification
Back to top
Processors
Entry Processors - E5-2600 v2 series Processor kits
NOTE: All support up to 1333MHz memory speeds.
Base Processors - E5-2600 v2 series Processor kits
NOTE: All support up to1600MHz DDR3 memory speeds.
Performance Processors - E5-2600 v2 series Processor kits
NOTE: All support up to 1866MHz DDR3 memory speeds
Entry Processors - E5-2600 series Processor kits
NOTE: All support up to 1066MHz memory speeds.
Base Processors - E5-2600 series Processor kits
NOTE: All support up to1333MHz DDR3 memory speeds.
Performance Processors - E5-2600 series Processor kits
NOTE: All support up to 1600MHz DDR3 memory speeds.
HP DL380p Gen8 Intel® Xeon® E5-2637 (3.0GHz/2-core/5MB/80W) Processor Kit
NOTE: Up to 2 processors supported. Performance and Energy Star Model configurations include two processors.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology
NOTE: Turbo2: Intel® Turbo Boost Technology 2.0 provides more computing power when you need it with performance that adapts to spikes in your workload and delivers more performance upside than then previous generation turbo technology.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
$455.00 $325.00
Back to top
Memory
NOTE: HP memory from previous generation servers are not qualified or warranted with this HP ProLiant Server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen8. For additional information, please see the HP SmartMemory QuickSpecs at:
NOTE: LRDIMM, RDIMM and UDIMM, are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant Gen8 servers support LRDIMM, RDIMM and UDIMMs
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2600 v2 series Processors.
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2600 series Processors.
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2600 v2 series Processors.
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2600 series Processors.
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2600 v2 series Processors.
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2600 series Processors.
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced CAS-9 Low Voltage Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool
$782.00 $548.00
NOTE: Depending on the memory configuration and processor model, 1600MHz and 1333MHz memory may operate at a lower speed. Please see the see the "Memory" section later in this document and the Online Memory Configuration Tool for details at
NOTE: For additional memory rules and guidelines, see the "Memory" section later in this document.
NOTE: For more information on ProLiant Energy Efficient Features, see:
NOTE: PC3L is a low voltage memory.
Back to top
Drives
NOTE: The HP ProLiant DL380p Gen8 Smart Storage solutions are equipped with entirely re-designed Small Form Factor (SFF 2.5 in) and Large Form Factor (LFF 3.5 in) hot plug carriers for HP Qualified Hard Drives and Solid State Drives. These new carriers provide status and activity indicators as well as caution indicators for "Do Not Remove"
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: All 12G SAS Hard drives only operate at 6G speeds in the DL380pGen8.
12G SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
12G SAS Hot Plug SmartDrive LFF (3.5-inch) Converter Enterprise Drives
12G SAS Hot Plug SFF (2.5-inch) SC 512e Drives
12G SAS Hot Plug LFF (3.5-inch) Midline (MDL) 512e Drives
12G SAS Hot Plug LFF (3.5-inch) SC 512e Performance Drives
6G SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
6G SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
6G SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives
HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
$225.00 $166.00
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
6G SATA Hot Plug with SmartDrive LFF (3.5-inch) Midline (MDL) Drives
6G SATA Hot Plug SFF (2.5-inch) SC 512e Drives
6G SATA Hot Plug LFF (3.5-inch) Midline (MDL) 512e Drives
6G SATA Hot Plug LFF (3.5-inch) SC 512e Performance Drives
HP 4TB 6G SATA 7.2K rpm LFF (3.5-inch) SC 512e Performance 1yr Warranty Hard Drives
NOTE: SATA hard drives have a 1-year warranty. Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13021_na/13021_na.html
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
(Worldwide)
6G SATA 2.5in WI-PLP SCC SSD
6G SATA Hot Plug MU-3 SFF (2.5-inch) SC Solid State Drives
6G SATA Hot Plug RI-3 SFF (2.5-inch) SC Solid State Drives
6G SATA Hot Plug LFF (3.5-inch) RI-3 SCC SSD
6G SATA Hot Plug LFF (3.5-inch) MU-3 SCC SSD
6G SATA 3.5in MU-PLP SCC SSD
6G SATA 3.5in RI-PLP SCC SSD
6G SATA 2.5in WI-PLP SC SSD
6G SATA 2.5in MU-PLP SC SSD
6G SATA 2.5in RI-PLP SC SSD
12G SAS Hot Plug Value Endurance SFF (2.5-inch) Enterprise Value SSD
12G SAS Hot Plug Value Endurance LFF (3.5-inch) Enterprise Value SSD
12G SAS Mainstream Endurance Hot Plug SFF (2.5-inch) H2 Solid State Drives
12G SAS Hot Plug SFF (2.5-inch) SC Read/Write Intensive Solid State Drives
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Boot SSD
6G SATA Value Endurance Hot Plug LFF (3.5-inch) Enterprise Boot SSD
6G SATA Hot Plug Value Endurance LFF (3.5-inch) Converter Enterprise Value M1 Solid State Drives
6G SATA Hot Plug Value Endurance LFF (3.5-inch) Converter Enterprise Value G1 Solid State Drives
6G SATA Hot Plug Value Endurance SFF (2.5-inch) Enterprise Value G1 Solid State Drives
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives
6G SATA Value Endurance Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
6G SATA Hot Plug Light Endurance SFF (2.5-inch) Enterprise Light G1 Solid State Drives
6G SATA Hot Plug Light Endurance LFF (3.5-inch) Enterprise Light G1 Solid State Drives
Solid State Drives
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value M1 Solid State Drive
6G SATA Mainstream Endurance Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
6G SATA Mainstream Endurance Hot Plug LFF (3.5-inch) Enterprise Mainstream Solid State Drives
6G SATA Hot Plug SFF (2.5-inch) SC Read Intensive Solid State Drives
6G SATA Hot Plug LFF (3.5-inch) SC Read Intensive Solid State Drives
Hard Drive Kits
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives ordered with the server.
NOTE: The part numbers for single HDD blanks below are provided should the customer require replacement HDD blanks for their server.
HP DL380/DL385 Gen8 8 Small Form Factor Hard Drive Backplane Cage Kit
NOTE: With upgrade of 8SFF Cage/Bkpln (662883-B21), there is no Optical Drive support
NOTE: All cables necessary for proper installation of the 8SFF Cage are included with this Kit.
NOTE: With upgrade of 8SFF Cage/Bkpln (662883-B21), an additional storage controller is required. HP recommends the HP Smart Array P420/1GB FBWC 6Gb 2- ports Int SAS Controller (P/N 631670-B21).
NOTE: The P822 controller has only two internal ports like the P420 controller and cannot be used to attach both 8SFF drive cages through a single controller. Please see the QuickSpecs for Technical Specifications and additional information:
$371.00 $265.00
NOTE: In Gen8, the 8+8SFF solution is designed as a performance configuration delivering maximum IOPS across the two drive cages. Customers seeking to have all drives in a single volume should consider the DL380p Gen8 25 SFF Configure-to-order Server (P/N 665554-B21) as a base.
Hard Drive Cables
Back to top
Networking
Gigabit Ethernet adapters
10 Gigabit Ethernet Adapters
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information:
HP Ethernet 10Gb 2-port 561T Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://www.hp.com/go/ProLiantNICs
$509.00 $429.00
FlexibleLOM Adapters
NOTE: Only one FlexibleLOM can be added to the server. These options are upgradeable and can be changed from the original configuration after the server is shipped.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information:
HP Ethernet 10Gb 2-port 571FLR-SFP+ Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional information
Back to top
InfiniBand
HP Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544QSFP Adapter
NOTE: For the following two InfiniBand Adapters, only 1 FlexibleLOM can be added to the server, which is selected in Step 2 for the "Configuration Information - Factory Integrated Models" section. These two options are for upgrade or change from original configuration.
NOTE: FLR Indicates new HP FlexibleLOM Adapter series.
$377.00 $265.00
HP InfiniBand FDR 2-port 545QSFP Adapter
NOTE: 10Gb Ethernet requires the use of the QSFP to SFP+ adapter P/N 655874-B21.
NOTE: Please see the QuickSpecs for additional information:
$399.00 $299.00
HP I/O Expansion Options
HP DL380p/560 Gen8 2 Slot 2x16 PCI-E Riser Kit
NOTE: Kit is required to support cards greater than 9.5", in the secondary position only.
NOTE: Two 1200W Power supply kits and 2 processors are required for this riser
NOTE: This riser supports two single wide, or one double wide CPU option in the secondary riser position
NOTE: The double wide riser cage kit is not supported in the 8LFF, 12LFF and 25SFF Configuration Servers.
$95.00 $75.00
HP DL380p Gen8 Double Wide Slot1 Riser Cage Kit
NOTE: Kit is required to support cards greater than 9.5", in the primary position only, and supports one double wide card and a single PCI card in this riser.
NOTE: This riser supports one single wide, or one double wide GPU option in the primary riser position
NOTE: The double wide riser cage kit is not supported in the 8LFF, 12LFF and 25SFF Configuration Servers
HP DL380p Gen8 NEBS Conversion Cage Kit
NOTE: This conversion kit is only available for the 8SFF base server model.
NOTE: A NEBS conversion cage kit is required for each riser in an 8SFF base server for the server to meet NEBS and ETSI certification.
Back to top
Power Supplies
NOTE: Mixing of power supplies in the same server is not supported. All power supplies must be of the same output and efficiency rating. If non-matched power supplies are inserted, you will get errors, and operation will fail.
NOTE: Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at:
HP Common Slot Platinum Plus Power Supply Kits
NOTE: The following Power Supplies offer 94% efficiency with support for Intelligent Power Discovery.
HP Common Slot Platinum Power Supply Kits
NOTE: The following Power Supplies offer 94% efficiency to save on energy costs. HP Common Slot Platinum Power Supplies do not support Power Discovery Services and ship with a standard AC power connector.
HP Common Slot Gold Power Supplies
NOTE: The following Power Supplies offer 92% Efficiency
HP Common Slot -48VDC Power Supplies
HP 750W Common Slot -48VDC Hot Plug Power Supply Kit
NOTE: The 750W Common Slot -48VDC Hot Plug Power Supply Kit does not include a power cord. It has been designed with a terminal block connection that allows for custom design of power cords by the end user. To select an alternative power cord for your server, please review the HP Common Slot Power Supplies QuickSpecs
$849.00 $725.00
HP Common Slot 380VDC Power Supplies
HP 1200W Common Slot 380VDC Hot Plug Power Supply Kit
NOTE: The 1200W Common Slot 380VDC Hot Plug Power Supply Kit does not include a power cord.
HP Common Slot 277VAC Power Supplies
HP 1200W Common Slot 277VAC Hot Plug Power Supply Kit
NOTE: The 1200W Common Slot 277VAC Hot Plug Power Supply Kit does not include a power cord. High voltage power cable option kits are sold separately
HP Common Slot Titanium Power Supply Kits
NOTE: The following power supply offers 96% efficiency with support for HP Power Discovery Services
HP 750W Common Slot Titanium Hot Plug Power Supply Kit
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
NOTE: HP ProLiant servers ship with an IEC-IEC power cord used for rack mounting with Power Distribution Units (PDUs). For a full list of optional HP power cords please go to
NOTE: Power Specification and Technical Content for supported power supplies can be found at:
Back to top
Storage Controllers
SAS Controllers
Smart Array P222 Controller
NOTE: P222 requires (1) HP Mini SAS Straight to Straight 37in Cable Assembly (P/N 662897-B21)
Smart Array P420 Controller
NOTE: P420 requires (2) HP Mini SAS Straight to Straight 37in Cable Assemblies (P/N 662897-B21)
Smart Array P421 Controller
NOTE: If a P421 controller is selected for the 12LFF model, it cannot be populated in slot 1
Smart Array P430 Controller
NOTE: If a P430 controller is selected for any model, it cannot be populated in slots 3 or 4.
Smart Array P431 Controller
Smart Array P822 Controller
NOTE: If a P822 controller is selected for the 12LFF or 25SFF model, it cannot be populated in slot 3.
HP Smart Array P822/2GB FBWC 6Gb 2-ports-Int/4-ports Ext SAS Controller
NOTE: The P822 controller has only two internal ports like the P420 controller and cannot be used to attach both 8SFF drive cages through a single controller. Please see the QuickSpecs link below for Technical Specifications and additional information.
$622.00 $475.00
Smart Array P830 Controller
Optional Upgrades
Host Bus Adapters
SCSI HBA
$257.00 $190.00
Back to top

Last updated: 4/29/2018

Need help finding the correct part? Live Chat operators are standing by. LET US HELP