HP ProLiant DL360p Gen8 Parts

Processors
NOTE: Customers who have DL360p Gen8 servers with E5-2600 processors and want to upgrade to E5-2600v2 processors will need to contact their HP representative for a list of SKUs that are compatible with that system.
NOTE: If two processors are desired, select the second from the xxxxxx-B21 below.
Entry Processors - E5-2600 v2 series Processor kits
NOTE: All support up to 1333MHz memory speeds.
Base Processors - E5-2600 v2 series Processor kits
NOTE: All support up to1600MHz DDR3 memory speeds.
Performance Processors - E5-2600 v2 series Processor kits
NOTE: All support up to 1866MHz DDR3 memory speeds.
Back to top
Memory
NOTE: HP memory from previous generation servers are not qualified or warranted with this HP ProLiant Server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen8. For additional information, please see the HP SmartMemory QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE: LRDIMM, RDIMM, and UDIMM, and HDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant Gen8 servers support LRDIMM, RDIMM and UDIMMs.
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2600 v2 series Processors.
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2600 series Processors.
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2600 v2 series Processors.
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2600 series Processors.
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2600 v2 series Processors.
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2600 series Processors.
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced CAS-9 Low Voltage Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: http://www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: http://www.hp.com/go/proliant-energy-efficient
NOTE: PC3L is a low voltage memory
NOTE: HP memory from previous generation servers are not qualified or warranted with this HP ProLiant Server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen8. For additional information, please see the HP SmartMemory QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM and LRDIMM.
$385.00 $295.00
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2600 v2 series Processors.
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2600 series Processors.
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2600 v2 series Processors.
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2600 series Processors.
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2600 v2 series Processors.
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2600 series Processors.
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced CAS-9 Low Voltage Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: http://www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: http://www.hp.com/go/proliant-energy-efficient
NOTE: PC3L is a low voltage memory
$385.00 $295.00
Back to top
Drives
NOTE: The HP ProLiant DL360p Gen8 Smart Storage solutions are equipped with entirely re-designed Small Form Factor (SFF 2.5 in) and Large Form Factor (LFF 3.5 in) hot plug carriers for HP Qualified Hard Drives and Solid State Drives. These new carriers provide status and activity indicators as well as caution indicators for 'Do Not Remove'.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
12G SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
12G SAS Hot Plug SmartDrive LFF (3.5-inch) Converter Enterprise Drives
12G SAS Hot Plug SFF (2.5-inch) SC 512e Drives
6G SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
6G SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
6G SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives
HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline Hard Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
$181.00 $146.00
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
6G SATA Hot Plug with SmartDrive LFF (3.5-inch) Midline (MDL) Drives
6G SATA Hot Plug SFF (2.5-inch) SC 512e Drives
6G SATA 2.5in WI-PLP SCC SSD
6G SATA 2.5in MU-PLP SCC SSD
6G SATA 2.5in RI-PLP SCC SSD
6G SATA 2.5in WI-PLP SC SSD
6G SATA 2.5in MU-PLP SC SSD
6G SATA 2.5in RI-PLP SC SSD
6G SATA Hot Plug LFF (3.5-inch) Midline (MDL) 512e Drives
6G SATA Hot Plug LFF (3.5-inch) SC 512e Performance Drives
HP 4TB 6G SATA 7.2K rpm LFF (3.5-inch) SC 512e Performance Hard Drives
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
$714.00 $549.00
12G SAS Hot Plug Value Endurance SFF (2.5-inch) Enterprise Value Solid State Drives
6G SATA Value Endurance Hot Plug LFF (3.5-inch) Enterprise Boot Solid State Drives
12G SAS Hot Plug SFF (2.5-inch) Enterprise Drives
12G SAS Hot Plug LFF (3.5-inch) Midline (MDL) 512e Drives
12G SAS Hot Plug LFF (3.5-inch) SC 512e Performance Drives
$450.00 $350.00
12G SAS Mainstream Endurance Hot Plug SFF (2.5-inch) Enterprise Mainstream H2 Solid State Drives
12G SAS Hot Plug SFF (2.5-inch) SC Read/Write Intensive Solid State Drives
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Boot Solid State Drives
6G SATA Value Endurance Hot Plug LFF (3.5-inch) Enterprise Boot Solid State Drives
6G SATA Hot Plug Value Endurance LFF (3.5-inch) Converter Enterprise Value M1 Solid State Drives
6G SATA Hot Plug Value Endurance LFF (3.5-inch) Converter Enterprise Value G1 Solid State Drives
6G SATA Hot Plug Value Endurance SFF (2.5-inch) Enterprise Value G1 Solid State Drives
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives
6G SATA Value Endurance Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
6G SATA Hot Plug Light Endurance SFF (2.5-inch) Enterprise Light G1 Solid State Drives
6G SATA Hot Plug Light Endurance LFF (3.5-inch) Enterprise Light G1 Solid State Drives
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value M1 Solid State Drive
6G SATA Mainstream Endurance Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
6G SATA Mainstream Endurance Hot Plug LFF (3.5-inch) Enterprise Mainstream Solid State Drives
6G SATA Hot Plug SFF (2.5-inch) SC Read Intensive Solid State Drives
6G SATA Hot Plug LFF (3.5-inch) SC Read Intensive Solid State Drives
Hard Drive Kits
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives ordered with the server.
Hard Drive Cables
HP DL38x/DL360 Gen8 Embedded SATA Cable Kit
NOTE: This cable is only required to connect a single SATA drive to the embedded Intel SATA controller. The P420i controller is not used in this configuration and should be disabled via RBSU to save power.
$88.00 $79.00
Back to top
Networking
Gigabit Ethernet Adapters
10 Gigabit Ethernet Adapters
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. See cables/options below.
FlexibleLOM Adapters
NOTE: For the following FlexibleLOM Network Adapters, only 1 FlexibleLOM can be added to the server, which is selected in Step 2 of the 'Configuration Information - Factory Integrated Models' section. These options are for upgrade or change from original configuration after the server is shipped.
HP Ethernet 10Gb 2-port 571FLR-SFP+ Adapter
NOTE: SFP Transceivers for the 530FLR-SFP+ are not included with the server and must be purchased separately.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://www.hp.com/go/ProLiantNICs.
$471.00 $362.00
Back to top
Secure Encryption
HP Secure Encryption No Media Flexible License per Drive
NOTE: HP Secure Encryption is supported on the HP Smart Array P731m and the P230i as an option. HP Secure Encryption licensing is based on the number of physical drives requiring encryption.
NOTE: For more information about HP Secure Encryption, go to http://www.hp.com/go/hpsecureencryption.
Back to top
InfiniBand
HP Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544QSFP Adapter
NOTE: For the following two InfiniBand Adapters, only 1 FlexibleLOM can be added to the server, which is selected in Step 2 for the 'Configuration Information - Factory Integrated Models' section. These two options are for upgrade or change from original configuration.
NOTE: FLR Indicates new HP FlexibleLOM Adapter series.
$377.00 $265.00
HP Infiniband QDR/Ethernet 10Gb 2-port 544FLR-QSFP Adapter
NOTE: 10Gb Ethernet requires the use of the QSFP to SFP+ adapter P/N 655874-B21.
NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/13078_na/13078_na.html
$97.00 $78.00
Back to top
Power Supplies
NOTE: Mixing of power supplies in the same server is not supported. All power supplies inside a server must be exactly the same model. Mixing Gold, Platinum, and Platinum Plus certified power supplies is not supported.
NOTE: Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: http://www.hp.com/go/hppoweradvisor
HP Common Slot Titanium Power Supply Kits
NOTE: 96% efficiency with support for HP Power Discovery Services.
HP Common Slot Platinum Plus Power Supply Kits
NOTE: The following Power Supplies offer 94% Efficiency with support for Intelligent Power Discovery.
HP Common Slot Gold Power Supplies
NOTE: The following Power Supplies offer up to 92% efficiency.
HP Common Slot -48VDC Power Supplies
NOTE: The following Power Supplies offer 92% Efficiency.
HP 750W Common Slot -48VDC Hot Plug Power Supply Kit
NOTE: The HP 750W Common Slot -48VDC power supply does not ship with a power cable. It has been designed with a terminal block connection allowing for custom design of power cords by the user.
$849.00 $725.00
HP Common Slot 277VAC Power Supplies
NOTE: 94% efficiency.
HP 750W Common Slot 277VAC Hot Plug Power Supply Kit
NOTE: Option Kits for AC power supplies include the power supply and one PDU IEC cable.
NOTE: HP ProLiant servers ship with an IEC-IEC power cord used for rack mounting with Power Distribution Units (PDUs). For a full list of optional HP power cords please go to http://www.hp.com/products/powercords
NOTE: Power Specification and Technical Content for supported power supplies can be found at: http://h18000.www1.hp.com/products/quickspecs/14209_na/14209_na.html
Back to top
Graphic Options
Back to top
Storage Controllers
SAS Controllers
Smart Array P222 Controller
HP Smart Array P222/512 FBWC 6Gb 1-port Int/1-port Ext SAS Controller
NOTE: A quantity of 1 HP Mini SAS Str to Left 33in Cable Assy (662899-B21) is required for proper connectivity.
$140.00 $113.00
Smart Array P421 Controller
Smart Array P430 Controller
Smart Array P431 Controller
Smart Array P822 Controller
HP Smart Array P822/2GB FBWC 6Gb 2-ports-Int/4-ports Ext SAS Controller
NOTE: A quantity of 2 HP Mini SAS Str to Left 33in Cable Assy (662899-B21) are required for proper connectivity.
$370.00 $298.00
Optional Upgrades
Host Bus Adapter
HP H222 Host Bus Adapter
NOTE: A quantity of 1 HP Mini SAS Str to Left 33in Cable Assy (662899-B21) is required for proper connectivity.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
(HBA 220)
(HBA 221)
(HBA 222)
$390.00 $350.00
SCSI HBA
$257.00 $190.00
Back to top
Rack Options
HP LCD8500 1U Rackmount Console Kit Models
HP LCD8500 1U Rackmount Console Kit Options
HP Location Discovery Services
HP 47U Location Discovery Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
HP USB Keyboard and Mouse
HP USB BFR with PVC Free US Keyboard/Mouse Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
$144.00 $98.00
HP Server Console Switches
HP Server Console Switch G2 with Virtual Media & CAC
KVM USB Cnsl Itfc Adapter 1PK ALL
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
HP 1x4 USB/PS2 KVM Console Switch
Rail Kits
NOTE: Gen8 rail kits have changed significantly from prior generation rail kits. Please take a moment to review the installation documentation that comes with the server to help you with the installation of your Gen8 server.
NOTE: Rail kits are optional for Gen8 and are no longer included standard with the server. Customers have the option to purchase their server without a rail kit.
Caution: HP recommends that a minimum of two people are required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.
HP 1U Small Form Factor Easy Install Rail Kit
NOTE: For SFF models.
NOTE: Kit contains full extension rails which do allow for in rack serviceability. After the rails are installed the server is aligned with the rails and slid into the rack. The HP 1U Easy Install Cable Management Arm is optional.
$141.00 $125.00
Caution: HP recommends that a minimum of two people are required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.
HP 1U Small Form Factor Ball Bearing Rail Kit
NOTE: For SFF models.
NOTE: HP 1U Small Form Factor Ball Bearing Gen8 Rail Kit ships standard with some BTO Preconfigured Channel Models.
$235.00 $181.00
HP 1U Cable Management Arm for Ball Bearing Rail Kit
NOTE: The HP 1U Gen8 Cable Management Arm is optional for the SFF and LFF Ball Bearing Rail Kits and is not available for use with the Friction Rail Kit.
$150.00 $115.00
$229.00 $176.00
Back to top
USB and SD Options
HP Flash Media Kits for USB Drives
NOTE: HP qualified blank USB key for use with HP ProLiant servers that support the VMware virtualization environment and other HP value-add software. HP recommends this industry standard USB flash device for use with VMware ESXi. USB device must be installed in the internal slot of the ProLiant server for use with VMware ESXi. Refer to HP VMware Getting Started Guide for installation instructions.
HP Enterprise Mainstream Flash Media Kits for Memory Cards
Back to top

Last updated: 5/5/2019

Need help finding the correct part? Live Chat operators are standing by. LET US HELP