Sign In or Register
Sales & Support: 1-877-418-3246
0 ITEMS | $0.00 View Cart
 

HP ProLiant DL360e Gen8 Parts

Processors
NOTE: If two processors are desired, select the second from the xxxxxx-B21 below.
Quad-Core Processors
NOTE: All support up to 1066MHz DDR3 memory speeds.
Six-Core Processors
NOTE: All support up to1333MHz DDR3 memory speeds.
Eight -Core Processors
NOTE: All support up to 1600MHz DDR3 memory speeds.
HP DL360e Gen8 Intel® Xeon® E5-2450L (1.8GHz/8-core/20MB/70W) Processor Kit
NOTE: Up to 2 processors supported.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo 2 indicates the maximum potential bin increments when using Intel® Turbo Boost Technology, with 8, 7,6,5,4,3,2 and 1 cores active DDR3 speed is the maximum memory speed of the processor. 
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed (options for 1600, 1333, 1066MHz)
NOTE: For the Intel® C600 Chipset E5-2400 Series, the letter preceding the model number indicates the Product Line (E3, E5, E7); 2400x v#, 2 = number of CPUs in a Node, 4 is socket/segment designation, 00 = Processor SKU, x = L for low power SKUs and v#(not yet designated) = version number.
$1,550.00 $1,395.00
Back to top
Memory
NOTE: To realize the performance memory capabilities listed in this document, HP SmartMemory is required. For additional information, please see the HP SmartMemory QuickSpecs at:
NOTE: HP memory from previous generation servers are not fully compatible with Smart Memory features in Gen8 Servers.
Registered DIMMs (RDIMMs)
Unbuffered with ECC DIMMs (UDIMMs)
Load Reduced DIMMs (LRDIMMs)
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced CAS-9 Low Voltage Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: 
NOTE: PC3L is a low voltage memory.
$1,050.00 $850.00
Back to top
Drives
NOTE: The HP ProLiant Gen8 Smart Storage solutions are equipped with entirely re-designed Small Form Factor (SFF 2.5 in) and Large Form Factor (LFF 3.5 in) hot plug carriers for HP Qualified Hard Drives and Solid State Drives. These new carriers provide status and activity indicators as well as caution indicators for "Do Not Remove". 
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug with Smart Drive SFF (2.5-inch) Enterprise Drives
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
SAS Hot Plug SmartDrive LFF (3.5-inch) Enterprise Drives
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives
HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline Hard Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: 
$449.00 $355.00
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
6G SATA Hot Plug with SmartDrive LFF (3.5-inch) Midline (MDL) Drives
HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline Hard Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: 
$375.00 $259.00
6G SAS ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
6G SAS SLC Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives
3G SATA MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
3G SATA MLC Hot Plug LFF (3.5-inch) Enterprise Mainstream Solid State Drives
$750.00 $728.00
Back to top
Networking
Gigabit Ethernet Adapters
10 Gigabit Ethernet Adapters
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. See cables/options below.
HP Ethernet 10Gb 2-port 560SFP+ Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
$650.00 $585.00
Back to top
Power Supplies
NOTE: Mixing of power supplies in the same server is not supported. All power supplies inside a server must be exactly the same model. Mixing Gold, Platinum, and Platinum Plus certified power supplies is not supported.
NOTE: Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at:
HP Common Slot Platinum Plus Power Supply Kits 
NOTE: The following Power Supplies offer 94% Efficiency with support for Intelligent Power Discovery.
HP Common Slot Gold Power Supplies
NOTE: The following Power Supplies offer 92% Efficiency.
HP Common Slot -48VDC Power Supplies
NOTE: The following Power Supplies offer 92% Efficiency.
HP 750W Common Slot -48VDC Hot Plug Power Supply Kit 
NOTE: NOTE: The HP 750W Common Slot -48VDC power supply does not ship with a power cable. It has been designed with a terminal block connection allowing for custom design of power cords by the user.
NOTE: Option Kits for AC power supplies include the power supply and one PDU IEC cable.
NOTE: Power Specification and Technical Content for supported power supplies can be found at:
$506.00 $455.00
Back to top
Cooling Options
HP DL360e Gen8 Redundant Fan Kit
NOTE: The kit contains one fan to be added to a server with one processor installed to make the fans redundant.
$172.00 $155.00
Back to top
Graphic Options
HP DL360 Gen8 Front Video Adapter Kit
NOTE: Required to enable the front video port.
$217.00 $195.00
HP Graphic Card Power Adapter Kit
NOTE: NOTE: The adapter kit is used to provide power to high-wattage cards 
(example: graphics cards) that require up to 225W of power.
$209.00 $188.00
NVIDIA Quadro 4000 2GB PCI-E Adapter
NOTE: Only following OS types are supported: 64-bit Only: Red Hat Enterprise Linux 5.x, Red Hat Enterprise Linux 6.x, SUSE Linux Enterprise Server 11 SPx. 64-bit Only: Windows Server 2008 R2 SPx
$1,056.00 $950.00
Back to top
I/O Accelerator Options
Second Generation Accelerators
First Generation Accelerators
HP 160GB Single Level Cell PCIe ioDrive for ProLiant Servers
NOTE: A low-profile PCI bracket is included for use in low-profile slots.
$4,167.00 $3,750.00
HP 320GB Multi Level Cell PCIe ioDrive for ProLiant Servers
NOTE: A low-profile PCI bracket is included for use in low-profile slots.
$6,111.00 $5,500.00
HP 1.28TB Multi Level Cell PCIe ioDrive Duo for ProLiant Servers
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: 
$5,867.00 $5,280.00
Back to top
Storage Controllers
SAS Controllers
Smart Array P222 Controller
$620.00 $558.00
Smart Array P420 Controller
Smart Array P421 Controller
Smart Array P822 Controller
$1,720.00 $1,548.00
Optional Upgrades
HP 512MB B-series 36 inch Dynamic Smart Array Flash Backed Write Cache for ML/DL
NOTE: This kit includes a cable and cache module that is used in conjunction with the B320i and B120i controller.
$443.00 $399.00
HP 1U Gen8 Smart Array Cable Kit
NOTE: This cable kit is required when using the P222, P420, P822 Smart Array controllers, and H222, H220 HBAs. 
NOTE: If P420 is installed in Slot 1 of 8SFF model, this cable is not required.
$209.00 $188.00
HP Gen8 2-port SATA Cable Kit
NOTE: Required for 6SFF configurations with B120i
Out of stock
Host Bus Adapter
HP H220 Host Bus Adapter
NOTE: Supported on SFF models only.
$394.00 $355.00
HP H221 Host Bus Adapter
NOTE: This is a 2 x4 External Port HBA.
$388.00 $349.00
HP H222 Host Bus Adapter
NOTE: Supported on LFF models only.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
(HBA 220)
(HBA 221)
(HBA 222)
$428.00 $385.00
SCSI HBA
$299.00 $218.00
Back to top
Tape Backup
NOTE: For the complete range of tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape. For hardware and software compatibility of HP tape backup products see: http://www.hp.com/storage/SPOCK andwww.hp.com/go/ebs.
NOTE: For Internal drives to be connected to DL servers please make sure that you order rack mount kit as well.
Back to top
Modular Cooling System G2
Back to top
Rack Options
HP Location Discovery Services
HP 47U Location Discovery Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
HP USB Keyboard and Mouse
HP USB BFR with PVC Free US Keyboard/Mouse Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
HP TFT7600 G2 KVM Console and Monitor (TFT7600 G2)
HP Server Console Switches
HP TAA 0x2x16xKVM Server Console G2 Switch
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
HP Server Console Switch G2 with Virtual Media & CAC
HP KVM CAT5 1-pack USB Interface Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
HP 1x4 USB/PS2 KVM Console Switch
Rail Kits
NOTE: The HP 1U Gen8 Cable Management Arm is not available when using Friction Rails. To assist in the installation of the server into the rack an optional installation tool is available by contacting your local services representative (p/n 695539-001). Caution: HP recommends that a minimum of two people are required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.
HP 1U Small Form Factor Ball Bearing Gen8 Rail Kit
NOTE: For SFF models.
NOTE: Includes Rack Mounting Gen8 telescoping SFF Ball Bearing Rail Kit which does allow for in rack serviceability. Due to the size and weight of the server two people are required to insall the server into the rack. The HP 1U Gen8 Cable Management Arm is optional. To assist in the installation of the server into the rack an optional installation tool is available by contacting your local services representative. Caution: HP recommends that a minimum of two people is required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.
HP 1U Gen8 Cable Management Arm
NOTE: Supports Ball Bearing rail kit only.
HP 1U Large Form Factor Ball Bearing Gen8 Rail Kit
NOTE: For LFF models.
NOTE: Includes Rack Mounting Gen8 telescoping LFF Ball Bearing Rail Kit which does allow for in rack serviceability. Due to the size and weight of the server two people are required to install the server into the rack. The HP 1U Gen8 Cable Management Arm is optional. To assist in the installation of the server into the rack an optional installation tool is available by contacting your local services representative. Caution: HP recommends that a minimum of two people is required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.
Back to top

Last updated: 4/1/2015

Need help finding the correct part? Live Chat operators are standing by. LET US HELP
Accepted Credit Cards