HPE ProLiant DL360e Gen8 Parts
Memory
NOTE: HPE memory from previous generation servers are not fully compatible with Smart Memory features in Gen8 Servers.
Registered DIMMs (RDIMMs)
$63
$49.00
$61
$45.00
$73
$55.00
NOTE: The above memory is supported by the E5-2400 v2 series Processors.
$81
$58.00
$52
$39.00
$75
$55.00
$55
$39.00
$60
$44.00
$69
$49.00
$98
$75.00
NOTE: The above memory is supported by the E5-2400 series Processors.
$67
$48.00
Unbuffered with ECC DIMMs (UDIMM)
$60
$42.00
$162
$112.00
NOTE: The above memory is supported by the E5-2400 v2 series Processors.
$181
$124.00
$98
$68.00
$101
$68.00
$165
$118.00
NOTE: The above memory is supported by the E5-2400 series Processors.
$91
$65.00
Load Reduced DIMMs (LRDIMMs) for E5-2xxx series Processors
NOTE: The above memory is supported by the E5-2400 v2 and E5-2400 series Processors.
$147
$105.00
NOTE: PC3L is a low voltage memory.
Optical Media
$189
$135.00
Drives
NOTE: The HPE ProLiant DL360e Gen8 Smart Storage solutions are equipped with entirely re-designed Small Form Factor (SFF 2.5 in) and Large Form Factor (LFF 3.5 in) hot plug carriers for HPE Qualified Hard Drives and Solid State Drives. These new carriers provide status and activity indicators as well as caution indicators for 'Do Not Remove'.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
12G SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
12G SAS Hot Plug SmartDrive LFF (3.5-inch) Converter Enterprise Drives
12G SAS Hot Plug LFF (3.5-inch) Midline (MDL) 512e Drives
6G SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
6G SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
6G SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
6G SATA Hot Plug SFF (2.5-inch) SC 512e Drives
6G SATA Hot Plug LFF (3.5-inch) SC 512e Performance Drives
12G SAS Hot Plug Value Endurance SFF (2.5-inch) Enterprise Value Solid State Drives
12G SAS Hot Plug Value Endurance LFF (3.5-inch) Enterprise Value Solid State Drives
12G SAS High Endurance Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives
NOTE: This drive supports Gen8 servers only.
$653
$447.00
12G SAS Mainstream Endurance Hot Plug SFF (2.5-inch) Enterprise Mainstream H2 Solid State Drives
$1,252
$907.00
$461
$329.00
$422
$315.00
12G SAS Hot Plug SFF (2.5-inch) SC 512e Drives
12G SAS Hot Plug LFF (3.5-inch) SC 512e Performance Drives
12G SAS Hot Plug SFF (2.5-inch) SC Read/Write Intensive Solid State Drives
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Boot Solid State Drives
6G SATA 2.5in WI-PLP SCC SSD
6G SATA 2.5in MU-PLP SCC SSD
6G SATA 2.5in RI-PLP SCC SSD
6G SATA 2.5in WI-PLP SC SSD
6G SATA 2.5in MU-PLP SC SSD
6G SATA 2.5in RI-PLP SC SSD
6G SATA Value Endurance Hot Plug LFF (3.5-inch) Enterprise Boot Solid State Drives
6G SATA Hot Plug Value Endurance LFF (3.5-inch) Converter Enterprise Value G1 Solid State Drives
$387
$287.00
$390
$269.00
6G SATA Hot Plug Value Endurance SFF (2.5-inch) Enterprise Value G1 Solid State Drives
$457
$313.00
$351
$254.00
6G SATA Hot Plug with SmartDrive LFF (3.5-inch) Midline (MDL) Drives
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives
$785
$557.00
$622
$457.00
$366
$275.00
$315
$248.00
$244
$181.00
6G SATA Value Endurance Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
$1,053
$726.00
$556
$400.00
$557
$384.00
$551
$385.00
$566
$410.00
6G SATA Hot Plug Light Endurance SFF (2.5-inch) Enterprise Light G1 Solid State Drives
6G SATA Hot Plug Light Endurance LFF (3.5-inch) Enterprise Light G1 Solid State Drives
6G SATA Mainstream Endurance Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
$599
$499.00
$350
$250.00
$186
$135.00
6G SATA Mainstream Endurance Hot Plug LFF (3.5-inch) Enterprise Mainstream Solid State Drives
$755
$585.00
$490
$329.00
$380
$266.00
6G SATA Hot Plug SFF (2.5-inch) SC Read Intensive Solid State Drives
6G SATA Hot Plug LFF (3.5-inch) SC Read Intensive Solid State Drives
Networking
Gigabit Ethernet Adapters
Quickspecs for 656596-B21 - 2 ports - RJ-45 - 10 Gb - PCI Express 2.0 x8
$175
$125.00
Quickspecs for 652497-B21 - 2 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x4
$185
$128.00
Quickspecs for 647594-B21 - 4 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x4
$145
$98.00
Quickspecs for 615732-B21 - 2 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x1
$84
$59.00
10 Gigabit Ethernet Adapters
Quickspecs for 652503-B21 - 2 ports - SFP+ -10Gb+ - PCI Express 3.0 x8
$105
$75.00
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. See cables/options below.
$105
$75.00
InfiniBand
Power Supplies
NOTE: Mixing of power supplies in the same server is not supported. All power supplies inside a server must be exactly the same model. Mixing Gold, Platinum, and Platinum Plus certified power supplies is not supported.
NOTE: Prior to making a power supply selection it is highly recommended that the HPE Power Advisor is run to determine the right size power supply for your server configuration. The HPE Power Advisor is located at: (link)
HPE Common Slot Titanium Power Supply Kits
NOTE: The following Power Supply offers up to 96% Efficiency support for Intelligent Power Discovery.
$126
$95.00
HPE Common Slot Platinum Plus Power Supply Kits
NOTE: The above Power Supplies offer 94% Efficiency with support for Intelligent Power Discovery.*
$99
$69.00
HPE Common Slot Gold Power Supplies
NOTE: The following Power Supplies offer 92% Efficiency.
$83
$59.00
HPE Common Slot -48VDC Power Supplies
NOTE: The HPE 750W Common Slot -48VDC power supply does not ship with a power cable. It has been designed with a terminal block connection allowing for custom design of power cords by the user.
NOTE: The following Power Supplies offer 92% Efficiency.
$488
$399.00
Graphic Options
NOTE: Required to enable the front video port.
$673
$495.00
$537
$395.00
Storage Controllers
SAS Controllers
Smart Array P222 Controller
NOTE: Supported on LFF models only.
$120
$90.00
HPE Smart Array P430 Controller
NOTE: Supported on 8SFF models only. Cable kit PN: 725598-B21 is mandatorily required with P430 controller on DL360e Gen8.
$152
$112.00
HPE Smart Array P420 Controller
HPE Smart Array P431 Controller
HPE Smart Array P421 Controller
HPE Smart Array P822 Controller
NOTE: Supported on SFF models only.
$134
$94.00
Optional Upgrades
$63
$45.00
NOTE: This kit includes a cable and cache module that is used in conjunction with the B320i and B120i controller.
$98
$71.00
NOTE: This option is available with HPE Smart Array P430/P431 controllers only.
NOTE: This cable kit is required when using the P222, P420, P822 Smart Array controllers, and H222, H220 HBAs.
NOTE: If P420 is installed in Slot 1 of 8SFF model, this cable is not required.
$209
$188.00
NOTE: Required for 6SFF configurations with B120i
HPE Host Bus Adapters
$388
$266.00
$155
$112.00
SCSI HBA
Storage Options
Fibre Channel HBA
Brocade Fibre Channel HBAs
Emulex Fibre Channel HBAs
QLogic Fibre Channel HBAs
Converged Network Adapter
$177
$129.00
Rack Options
HPE LCD8500 1U Rackmount Console Kit Models
HPE LCD8500 1U Rackmount Console Kit Options
HPE Location Discovery Services
HPE USB Keyboard and Mouse
HPE Server Console Switches
HPE Server Console Switch G2 with Virtual Media & CAC
HPE IP Console Switch G2 with Virtual Media & CAC
Rail Kits
NOTE: The HPE 1U Gen8 Cable Management Arm is not available when using Friction Rails. To assist in the installation of the server into the rack an optional installation tool is available by contacting your local services representative (p/n 695539-001). Caution: HPE recommends that a minimum of two people are required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.
NOTE: For SFF models.
NOTE: Includes Rack Mounting Gen8 telescoping SFF Ball Bearing Rail Kit which does allow for in rack serviceability. Due to the size and weight of the server two people are required to insall the server into the rack. The HPE 1U Gen8 Cable Management Arm is optional. To assist in the installation of the server into the rack an optional installation tool is available by contacting your local services representative. Caution: HPE recommends that a minimum of two people is required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.
$360
$250.00
NOTE: Supports Ball Bearing rail kit only.
$200
$159.00
NOTE: For LFF models.
NOTE: Includes Rack Mounting Gen8 telescoping LFF Ball Bearing Rail Kit which does allow for in rack serviceability. Due to the size and weight of the server two people are required to install the server into the rack. The HPE 1U Gen8 Cable Management Arm is optional. To assist in the installation of the server into the rack an optional installation tool is available by contacting your local services representative. Caution: HPE recommends that a minimum of two people is required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.
$250
$225.00
NOTE: For SFF models.
NOTE: Kit contains full extension rails which do allow for in rack serviceability. After the rails are installed the server is aligned with the rails and slid into the rack. The HPE 1U Easy Install Cable Management Arm is optional.
Caution: HPE recommends that a minimum of two people are required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.
$243
$176.00
NOTE: For LFF models.
NOTE: Kit contains full extension rails which do allow for in rack serviceability. After the rails are installed the server is aligned with the rails and slid into the rack. The HPE 1U Easy Install Cable Management Arm is optional.
Caution: HPE recommends that a minimum of two people are required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.
$217
$172.00
NOTE: Supports Easy Install rail kits only
$151
$108.00
USB and SD Options
HPE Flash Media Kits for USB Drives
HPE Enterprise Mainstream Flash Media Kits for Memory Cards
Processors
| NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
E5-2400 v2 series Processor kits
Entry Processors - E5-2400v2 series CPU
NOTE: All support up to 1333MHz DDR3 memory speeds.
Base Processors - E5-2400v2 series CPU
NOTE: All support up to 1600MHz DDR3 memory speeds.
$599
$419.00
Performance Processors - E5-2400v2 series CPU
NOTE: All support up to 1600MHz DDR3 memory speeds.
$965
$689.00
E5-2400 (v1) series Processor kits
Entry Processors - E5-2400 series CPU
NOTE: All support up to 1066MHz DDR3 memory speeds.
Base Processors - E5-2400 series CPU
NOTE: All support up to 1333MHz DDR3 memory speeds.
Performance Processors - E5-2400 series CPU
NOTE: All support up to 1600MHz DDR3 memory speeds.
NOTE: Up to 2 processors supported.
NOTE: HT indicates that the processor model supports Intel /Hyper-Threading Technology
NOTE: Turbo2: Intel Turbo Boost Technology 2.0 provides more computing power when you need it with performance that adapts to spikes in your workload and delivers more performance upside than then previous generation turbo technology.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel C600 Chipset E5-2400 and E5-2400 v2 Series, the letter preceding the model number indicates the Product Line (E3, E5, E7); 2400x v#, 2 = number of CPUs in a Node, 4 is socket/segment designation, 00 = Processor SKU, x = L for low power SKUs and v# = version number.
Why Global One?
- Trusted by thousands. Over 32,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.
