HPE ProLiant DL360 Gen9 Parts

1U rack serverIntel Xeon E5-2600 v3 and v4

The HPE ProLiant DL360 Gen9 is a 1U rack server for one or two Intel Xeon E5-2600 v3 or v4 processors, and the processor's version decides its memory: DDR4-2133 kits for v3, DDR4-2400 for v4. This page lists the 260 parts HPE's QuickSpecs have listed for it across editions, by part type.

  • 260 HPE-listed parts
  • 24 DIMM slots, up to 3TB
  • Up to 10 SFF or 4 LFF drives
  • Up to 3 PCIe 3.0 slots on 2 risers
  • Flex Slot power, 500W to 1400W

Specifications: HPE QuickSpecs c04346229, version 48 (July 1, 2019), which HPE has retired. Memory and drive figures match the DL360 Gen9 Memory and Drives pages.

Shop DL360 Gen9 parts by type

More DL360 Gen9 parts: chassis, expansion and enablement

Most ordered from this list

The parts on this page our customers order most, for any server.

  1. Drives872479-B211.2TB SAS 12G Enterprise 10K SFF (2.5in) SC Digitally Signed Firmware HDD
  2. Drives872477-B21600GB SAS 12G Enterprise 10K SFF (2.5in) SC Digitally Signed Firmware HDD
  3. Drives881457-B212.4TB SAS 12G Enterprise 10K SFF (2.5in) SC 512e Digitally Signed Firmware HDD
  4. Network adapters811546-B21Ethernet 1Gb 4-port 366T Adapter
  5. Drives872481-B211.8TB SAS 12G Enterprise 10K SFF (2.5in) SC 512e Digitally Signed Firmware HDD
  6. Drives765466-B212TB SAS 12G Midline 7.2K SFF (2.5in) SC 512e HDD
  7. Drives870753-B21300GB SAS 12G Enterprise 15K SFF (2.5in) SC Digitally Signed Firmware HDD
  8. Drives872475-B21300GB SAS 12G Enterprise 10K SFF (2.5in) SC Digitally Signed Firmware HDD
  9. Drives765455-B212TB SATA 6G Midline 7.2K SFF (2.5in) SC 512e Digitally Signed Firmware HDD
  10. DrivesP04545-B211.6TB SAS 12G Write Intensive SFF (2.5in) SC Digitally Signed Firmware SSD

DL360 Gen9 at a glance

Processors

One or two Intel Xeon E5-2600 v3 or E5-2600 v4 processors of the same model; the model number ends in its version, and v3 and v4 do not mix. Every processor kit on this list is v4, so a v3 server cannot take one as its second processor.

Processors up to 120W ship with a standard heat sink and those over 120W with a High Performance heat sink, except the E5-2690 v4; the High Performance Heat Sink Kit (795235-B21) can be added to lower-power processors to reduce fan power.

Processors of 160W or more, such as the E5-2687W v4, need the High Performance Fan Kit (766201-B21). A 1P server has 5 fans and a 2P server 7; the second processor option kit contains two fans. DL360 Gen9 Processors

Memory

24 DIMM slots, 12 per processor on 4 channels; one processor uses only its 12. DDR4-2133 kits for v3 processors, DDR4-2400 for v4; 2133 and 2400 memory do not mix. Up to 3TB with v4 processors and 128GB LRDIMMs, which do not mix with other sizes; 1.5TB with v3 processors and 64GB LRDIMMs; 768GB with 32GB RDIMMs.

RDIMMs and LRDIMMs do not mix, and LRDIMMs need the High Performance Fan Kit (766201-B21). The 8GB NVDIMM works only with v4 processors and RDIMMs, up to 16, in servers factory configured with v4 processors. DL360 Gen9 Memory

Drives

Up to 10 SFF drives: 8 in the 8SFF model, 10 with the 2SFF SAS/SATA Universal Media Bay Kit (764630-B21), which is not supported in the 4LFF chassis and cannot be used with the DVD or USB/VGA media bay kits; or 4 LFF drives in the 4LFF model.

Up to 6 SFF NVMe SSDs (bays 5 to 10, with 4 SAS/SATA drives in bays 1 to 4) with the 6 NVMe + 4 SAS/SATA Express Bay Enablement Kit (817676-B21), whose PCIe card takes slot 1, or 2 with the NVMe 2 Solid State Drive Express Bay Enablement Kit (764628-B21); SFF only, and not with the Universal Media Bay.

NVMe SSDs and the 10SFF chassis need the High Performance Fan Kit (766201-B21). SATA M.2 SSDs fit a PCIe slot on the Universal SATA HHHL M.2 Kit, use the B140i only and support software RAID only. DL360 Gen9 Drives

Storage controllers

Embedded B140i: SATA only, up to 10 drives, UEFI mode only; legacy mode needs an additional controller. The Smart Array P440ar and Smart HBA H240ar support up to 8 internal drives without using a PCIe slot.

The P840ar needs the P840ar Cable Kit (843234-B21), and the P840 card kit (766205-B21) includes the cabling for a 10SFF chassis. A P440 card (726821-B21) needs the P440/H240 SAS Cables: 775927-B21 in an 8SFF server, 775929-B21 in a 4LFF one.

In a 4LFF server, moving from the B140i to an H240ar or P440ar needs the LFF P440ar/H240ar SAS Cable (766211-B21). Cable kits named SFF fit only the 8SFF chassis, and those named LFF only the 4LFF chassis. DL360 Gen9 Storage Controllers

Networking

4 x 1GbE embedded in both chassis, a FlexibleLOM bay that takes one FlexibleLOM, PCIe adapters, and a dedicated 1Gb iLO port. DL360 Gen9 Networking Adapters

Expansion

Up to 3 PCIe 3.0 slots: slots 1 and 2 on the primary riser, slot 3 on the secondary riser, which needs processor 2. With the secondary full-height kit (867249-B21), slot 2 cannot be used. I/O expansion options

Power

Flex Slot hot-plug power supplies from 500W to 1400W, including 800W Titanium and 800W -48VDC models; up to two per server, both the same model. DL360 Gen9 Power Supplies

Management

HPE iLO 4.

Specifications from HPE QuickSpecs c04346229, version 48 (July 1, 2019). Memory figures match the DL360 Gen9 Memory page.

Before you order memory or processors, check whether the processors are v3 or v4. The model number ends in the version: E5-2650 v3 and E5-2690 v3 are v3 and take DDR4-2133 kits; E5-2650 v4 and E5-2690 v4 are v4 and take DDR4-2400 kits. Do not mix 2133 and 2400 memory in one server. Every processor kit on this list is v4, and two processors must be the same model, so a v3 server cannot take one as its second processor. Find the model in iLO under System Information › Processors.

Complete your DL360 Gen9 build

DL360p Gen8, Gen9 or Gen10? How to tell

The processor model number tells the three DL360 generations apart, and it decides the memory you can buy.

What to checkDL360p Gen8DL360 Gen9 This pageDL360 Gen10
Processor model numbersE5-2600 or E5-2600 v2: E5-2670, E5-2650 v2, E5-2690 v2E5-2600 v3 or v4: E5-2650 v3, E5-2650 v4, E5-2690 v4x1xx or x2xx: Gold 6130, Gold 6230, Silver 4210
MemoryDDR3, 1066MHz to 1866MHz, 24 slotsDDR4-2133 or DDR4-2400, 24 slotsDDR4-2666 or DDR4-2933, 24 slots
Memory kits look like708641-B21, 713985-B21805351-B21, 728629-B21P00920-B21, P00918-B21
Parts pageDL360p Gen8 partsYou are hereDL360 Gen10 parts

From the HPE QuickSpecs of each server: HP ProLiant DL360p Generation 8 (Gen8) c04123167 version 64; HPE ProLiant DL360 Gen9 c04346229 version 48; HPE ProLiant DL360 Gen10 a00008159enw version 74.

All 260 DL360 Gen9 parts

Grouped by part type; within each group the parts are in the order of HPE's QuickSpecs. Open a group, or type a part number or a few words to filter the whole list.

DL360 Gen9 parts questions

How much memory does the DL360 Gen9 support?

Up to 3TB with two E5-2600 v4 processors and 128GB DDR4-2400 LRDIMMs in all 24 slots. With registered DIMMs the maximum is 768GB (32GB in every slot); with v3 processors and 64GB LRDIMMs it is 1.5TB. A single processor can use only its 12 slots. 128GB LRDIMMs do not mix with other sizes, RDIMMs and LRDIMMs do not mix, and LRDIMMs need the High Performance Fan Kit (766201-B21).

Which drives fit the DL360 Gen9?

SFF SC drives in SAS, SATA or NVMe in the 8SFF model; LFF SC and LFF SCC drives in SAS or SATA in the 4LFF model; NVMe HHHL cards; and SATA M.2 SSDs on the Universal SATA HHHL M.2 Kit. Which interfaces work depends on the controller. SFF NVMe SSDs need an NVMe Express Bay Enablement Kit and the High Performance Fan Kit (766201-B21).

How do I tell whether my DL360 Gen9 has v3 or v4 processors?

Read the processor model in iLO under System Information › Processors. The model number ends in its version: E5-2650 v3 is v3, E5-2650 v4 is v4. It decides the memory kit: DDR4-2133 for v3, DDR4-2400 for v4. Two processors must be the same model, so v3 and v4 do not mix, and every processor kit on this list is v4.

Is my server a DL360 Gen9, a DL360p Gen8 or a DL360 Gen10?

Check the processor model number. The Gen9 runs Xeon E5-2600 v3 or v4 processors (such as E5-2650 v4) with DDR4-2133 or DDR4-2400 memory. The DL360p Gen8 runs E5-2600 processors with no version or v2 (such as E5-2650 v2) with DDR3 memory. The Gen10 runs Xeon Scalable processors named Platinum, Gold, Silver or Bronze whose second digit is 1 or 2 (such as Gold 6130 or Gold 6230), with DDR4-2666 or DDR4-2933 memory. All three have 24 DIMM slots, so the slot count does not tell them apart. Memory kits and processors differ between them, so buy those from the page for your generation.

Are refurbished parts on this list too?

Yes. A refurbished part carries the same HPE part number as a new one, so it is listed here under that number, and each listing shows its condition. Every part ships tested or factory sealed.

What warranty comes with DL360 Gen9 parts?

A replacement warranty of 1 to 5 years, depending on the part: memory is covered for 5 years, and many other parts for 1 or 3 years.

Other DL360 generations

DL360p Gen8 partsDL360e Gen8 partsDL360 Gen10 partsDL360 Gen10 Plus partsDL360 Gen11 partsDL360 Gen12 partsAll HPE parts by server model
Ships same dayMost orders ship the same business day
1 to 5 year warrantyTested or factory sealed
Purchase orders acceptedCard, P-card, ACH, wire or PayPal too
Drives110 parts

All drives on the DL360 Gen9 Drives page

Hard Disk Drives - 2.5in SFF SAS

12G SAS Hot Plug SFF 2.5in Enterprise HDD
12G SAS Hot Plug SFF 2.5in Midline HDD
12G SAS Hot Plug LFF 3.5in Enterprise HDD

Hard Disk Drives - 2.5in SFF SATA

6G SATA Hot Plug SFF 2.5in Midline HDD

Hard Disk Drives - 3.5in LFF SAS

12G SAS Hot Plug LFF 3.5in SC Midline HDD

Hard Disk Drives - 3.5in LFF SATA

6G SATA Hot Plug LFF 3.5in Midline HDD

Solid State Drives - 2.5in SFF SAS

12G SAS Mixed Use Hot Plug SFF 2.5in SSD
12G SAS Mixed Use SFF 2.5in SC VS DSF SSD
12G SAS Hot Plug RI-3 SFF 2.5in SC SSD
12G SAS Read Intensive SFF SC VS DSF SSD
12G SAS Hot Plug SFF 2.5in Write Intensive SSD

Solid State Drives - 2.5in SFF SATA

6G SATA Hot Plug SFF 2.5in SC Read Intensive SSD
6G SATA Hot Plug SFF 2.5in SC Mixed Use SSD

Solid State Drives - 3.5in LFF SAS

12G SAS Mixed Use LFF 3.5in SCC VS DSF SSD
12G SAS Hot Plug MU-3 LFF 3.5in SC SSD

Solid State Drives - 3.5in LFF SATA

6G SATA Hot Plug LFF 3.5in SCC Read Intensive SSD
6G SATA Hot Plug LFF 3.5in SC Mixed Use SSD

Solid State Drives - SATA M.2

Read Intensive - 6G SATA - M.2 - SSD
Mixed Use - 6G SATA - M.2 - SSD
SATA HHHL M.2 Kit
HPE notes (3)
  • NOTE: M.2 drives go in PCIe slots and use B140i SATA controller only.
  • NOTE: M.2 supports Software RAID only.
  • NOTE: No HPE Flexible Smart Array supported.

Solid State Drives - NVMe

HPE NVMe PCIe Read Intensive SFF (2.5 inch) SSD
HPE note

NOTE: With NVMe support only 1xDouble Wide Graphics card is supported.

HPE NVMe PCIe Mixed Use SFF (2.5 inch) SSD
HPE notes (4)
  • NOTE: With NVMe support only 1xDouble Wide Graphics card is supported.
  • NOTE: The NVMe CTO chassis (810393-B21) or the NVMe Express Bay Enablement kit (774741-B21) are required to support these drives.
  • NOTE: HPE has qualified the NVMe drive portfolio using the Operating System inbox drivers, full detail on the HPE Solid State Drive QuickSpecs.
  • NOTE: With NVMe support only 1xDouble Wide Graphics card is supported.
HPE NVMe x8 Lanes Mixed Use HHHL
Memory13 parts

All memory on the DL360 Gen9 Memory page

Memory for E5-2600v4 Series

Registered DIMMs (RDIMMs) for E5-2600v4 Series
Load Reduced DIMMs (LRDIMMs) for E5-2600v4 Series
HPE Persistent Memory (NVDIMM) for E5-2600v4 Series
HPE note

NOTE: The following memory is supported by the E5-2600v4 series Processor only.

  • 782692-B21 HPE 8GB NVDIMM Single Rank x4 DDR4-2133 Module
    HPE notes (2)
    • NOTE: A maximum of 16 NVDIMMs can be supported. NVDIMMs cannot be used with LRDIMMs.
    • NOTE: NVDIMMs only supported on factory configured servers with E5-2600 v4 processors, not supported on servers upgraded from E5-2600 v3 to E5-2600 v4 processors.

Memory for E5-2600v3 Series

Registered DIMMs (RDIMMs) for E5-2600v3 Series
Load Reduced DIMMs (LRDIMMs) for E5-2600v3 Series
Network adapters24 parts

All network adapters on the DL360 Gen9 Networking Adapters page

25 Gigabit Ethernet adapters

  • 817753-B21 HPE Ethernet 10/25Gb 2-port 640SFP28 Adapter
    HPE notes (2)
    • NOTE: This option provides support for up to 6NVMe drives in SFF only. Adding NVMe drives replaces support for Universal Media Bay.
    • NOTE: The PCIe card in this enablement kit can only be populated in slot1 of primary riser.

10 Gigabit Ethernet adapters

1 Gigabit Ethernet adapters

FlexibleLOM Adapters

HPE InfiniBand 10Gb

Storage controllers21 parts

All storage controllers on the DL360 Gen9 Storage Controllers page

SAS Controllers

HPE Smart Array Controllers

HPE Smart Host Bus Adapters

HPE Cable Options

  • 843234-B21 HPE DL360 Gen9 Smart Array P840ar Cable Kit
  • 766207-B21 HPE DL360 Gen9 SFF Embedded SATA Cable
    HPE note

    NOTE: Needed only when attaching drive bays to the B140i controller in an 8 SFF Chassis.

  • 775927-B21 HPE DL360 Gen9 SFF Smart Array P440/H240 SAS Cables
    HPE note

    NOTE: Required with P440/4GB (761872-B21) or H240 (761873-B21) if using the HP ProLiant DL360 Gen9 8SFF CTO Server (755258-B21)

  • 766209-B21 HPE DL360 Gen9 SFF Smart Array P440ar/H240ar SAS Cable
  • 775929-B21 HPE DL360 Gen9 LFF Smart Array P440/H240 SAS Cables
    HPE note

    NOTE: Required with P440/4GB (761872-B21) or H240 (761873-B21) if using the HP ProLiant DL360 Gen9 4LFF CTO Server (755259-B21)

  • 766211-B21 HPE DL360 Gen9 LFF Smart Array P440ar/H240ar SAS Cable
    HPE note

    NOTE: Required for an upgrade from a B140i SATA controller to a HPE Smart HBA 240ar or HPE Smart Array P440ar.

  • 766213-B21 HPE DL360 Gen9 LFF Embedded SATA Cable
    HPE note

    NOTE: Options noted 'DL360 Gen9 SFF

Optional Software

Power supplies5 parts

All power supplies on the DL360 Gen9 Power Supplies page

HPE notes (6)
  • NOTE: Maximum of 2 Flex Slot power supplies per platform.
  • NOTE: All power supplies must be of the same input voltage, output rating, and efficiency rating. If non-matching power supplies are installed, you may receive an error message and/experience operational issues with your server.
  • NOTE: Mixing different power supplies in the same server may limit or disable some power supply features including support for power redundancy. To ensure access to all available features, all power supplies within the same server should have the same output and efficiency ratings
  • NOTE: Prior to selecting a power supply option, it is highly recommended that you review your server configuration in the HPE Power Advisor tool to determine the right size power supply. The HPE Power Advisor is located at: (link)
  • NOTE: Support for HPE Power Discovery Services is included with the 1400W Flex Slot option. Power specifications and technical content for all HPE Server power supplies can be found at: (link)
  • NOTE: Flex Slot Titanium power supplies support power efficiency of up to 96%.
Processors20 parts

All processors on the DL360 Gen9 Processors page

E5-2600v4 series Processors

Storage options23 parts
HPE note

NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and Linux. For detailed compatibility information please see:

Emulex Fibre Channel HBAs

QLogic Fibre Channel HBAs

Converged Network Adapter

InfiniBand adapters6 parts

HPE InfiniBand 100Gb

HPE 100Gb 1-port with Intel Omni-Path

HPE 100Gb 1-port with Intel Omni-Path

I/O expansion options2 parts
  • 764642-B21 HPE DL360 Gen9 Low Profile PCIe Slot CPU2 Kit
    HPE note

    NOTE: This option kit requires a second CPU and will add an additional Low Profile PCIe 3.0 slot.

  • 867249-B21 HPE DL360 Gen9 2P Full Height PCIe Slot 2 GPU Enablement Kit
    HPE notes (4)
    • NOTE: This enablement kit can support more than one Full Height/GPU card
    • NOTE: This option kit requires a second CPU and will add an additional FH / ¾ Length PCIe 3.0 slot.
    • NOTE: This kit includes GPU power cable and bracket; when this option kit is installed the Low Profile PCIe3.0 riser is not useable.
    • NOTE: It is not possible to convert a unit with the Full height kit back to dual Low Profile brackets.
Server-specific options12 parts
  • 764630-B21 HPE DL360 Gen9 2SFF SAS/SATA Universal Media Bay Kit
    HPE notes (2)
    • NOTE: Required when upgrading from an 8SFF config to a 10SFF config. This option kit is not supported on the 4LFF CTO Server and cannot be used with the DVD-ROM or DVD-RW Universal Media Bay option kits.
    • NOTE: This kit contains a cable to attach the 2 drives to the internal B140i SATA controller. For SAS, an alternate storage controller and its associated cable kit are required.
  • 764632-B21 HPE DL360 Gen9 SFF DVD-RW/USB Universal Media Bay Kit
    HPE note

    NOTE: DVD-RW, USB 2.0 and VGA included. This option kit cannot be used with the 2 SFF SAS/SATA option kit (764630-B21)

  • 818213-B21 HPE DL360 Gen9 SFF DVD/USB Universal Media Bay Kit
    HPE note

    NOTE: DVD ROM, USB 2.0 and VGA included. This option kit cannot be used with the 2 SFF SAS/SATA option kit (764630-B21).

  • 764634-B21 HPE DL360 Gen9 SFF USB/VGA Universal Media Bay Kit
    HPE note

    NOTE: Adds front VGA and USB 2.0 ports to SFF models. This option kit cannot be used with the 2 SFF SAS/SATA option kit (764630-B21).

  • 795235-B21 HPE DL360 Gen9 High Performance Heat Sink Kit
    HPE note

    NOTE: These are included in some higher Watt processors (see processor section), but may also be added to lower power processors to reduce fan power consumption.

  • 764646-B21 HPE DL360 Gen9 Rear Serial Port and Enablement Kit
  • 764636-B21 HPE DL360 Gen9 SFF Systems Insight Display Kit
    HPE note

    NOTE: Adds a System Insight Display for improved diagnosis capabilities on an 8FF or 10SFF model.

  • 764628-B21 HPE DL360 Gen9 NVMe 2 Solid State Drive Express Bay Enablement Kit
    HPE notes (3)
    • NOTE: This option provides support for up to 2 NVMe SFF drives. This option cannot be used with the Universal Media Bay Kit.
    • NOTE: The HPE DL360 Gen9 High Performance Fan Kit (766201-B21) will be required with this option.
    • NOTE: The PCIe card in this enablement kit can only be populated in slot1 of primary riser or in slot3 of secondary optional FH riser.
  • 817676-B21 HPE DL360 Gen9 6 NVMe + 4 SAS/SATA Express Bay Enablement Kit
    HPE notes (2)
    • NOTE: This option kit provides support for up to 6 NVMe drives (drives 5-10).
    • NOTE: The PCIe card in this enablement kit can only be populated in slot1 of primary riser.
  • 764638-B21 HPE DL360 Gen9 LFF USB/VGA Kit
    HPE notes (2)
    • NOTE: Adds front VGA and USB 2.0 ports to LFF chassis.
    • This option kit cannot be used with the 2 SFF SAS/SATA Option Kit (764630-B21).
  • 764640-B21 HPE DL360 Gen9 LFF Systems Insight Display Kit
    HPE note

    NOTE: Adds a System Insight Display for improved diagnosis capabilities on a 4LFF model.

  • 764757-B21 HPE DL360 Gen9 Location Discovery Services Ear Kit
    HPE note

    NOTE: Requires ProLiant Location Discovery Services Infrastructure within server racks.

Optical drives5 parts
Disk backup12 parts
HPE RDX Removable Disk Backup System
Tape backup9 parts

Rack-Mount Tape Solutions

Tape Drives

HPE Tape Storage Systems

HPE StoreEver MSL6480
Ships same dayMost orders ship the same business day
1 to 5 year warrantyReplacement coverage on every part
5,000+ five-star reviewsShopper Approved, BBB A+ rating
Ships to 120+ countriesBy UPS; duties are collected by the carrier

Building out several servers, or need a part not listed?

Send the part numbers and quantities for each server and we reply to every quote request within 24 hours. Live chat is the fastest way to reach us.

!