HPE ProLiant DL345 Gen12 Parts

HPE ProLiant DL345 Gen12 Parts

The HPE ProLiant DL345 Gen12 (HPE ProLiant Compute DL345 Gen12) is a 2U single-socket rack server built around one 5th Generation AMD EPYC 9005 processor, 24 DDR5 DIMM slots and PCIe 5.0 I/O, aimed at virtualization, software-defined storage and data management at one-processor economics. Every part below is genuine HPE, available new and refurbished, and tested for compatibility before it ships. Live pricing for each part number appears in the tables further down this page.

DL345 Gen12 Platform at a Glance

  • Form factor: 2U rack, 8.75 × 44.8 cm, in three chassis — SFF/EDSFF (63.55 cm deep), 8LFF (65.61 cm) and GPU (83.71 cm)
  • Processor: one 5th Gen AMD EPYC 9005 in a 6096-pin SP5 socket, from the 8-core 125W EPYC 9015 to the 192-core 500W EPYC 9965, with 128 PCIe 5.0 lanes and up to 512MB of L3 cache
  • Memory: 24 DDR5 DIMM slots across 12 channels at two DIMMs per channel, HPE DDR5 Smart Memory RDIMM only, up to 6TB with 256GB modules; LRDIMM and persistent memory are not supported
  • Drive bays: up to 24 SFF Basic Carrier or 36 EDSFF E3.S 1T bays (mixing supported), or 8 LFF with an optional 4 LFF bay or optical drive, or 8 SFF / 8 E3.S alongside the GPUs in the GPU chassis
  • Storage controllers: HPE MR216i, MR408i and MR416i Gen11 in OCP (-o) or PCIe plug-in (-p) form, the x32-lane PCIe Gen5 MR932i-p, and the Smart Array E208e-p for external SAS; NS204i-u v2 hot-plug NVMe boot device at the front or rear
  • Expansion: up to six PCIe 5.0 x16 full-height slots, two rear OCP 3.0 slots (A default at x16, B optional at x8 or x16) and two optional front OCP 3.0 slots on the SFF/EDSFF and GPU chassis
  • Networking: no embedded ports — every build takes an OCP 3.0 or PCIe stand-up adapter, from 1Gb BASE-T to 100Gb Ethernet, plus InfiniBand NDR/XDR and 32Gb/64Gb Fibre Channel HBAs
  • GPUs: up to six single-width or four double-width accelerators — NVIDIA L4, L40S, RTX PRO 4500 and RTX PRO 6000 Blackwell Server Edition
  • Power and cooling: two HPE M-CRPS bays (the second supply optional) taking 800W Platinum to 3200W Titanium AC units or 1300W and 2200W -48VDC units; six hot-plug fans in standard or performance kits, matched to processor wattage
  • Management and security: HPE iLO 7, embedded TPM 2.0, Silicon Root of Trust 2.0, four USB 3.2 Gen 1 ports and a dedicated 1Gb iLO port; 3-year parts, labor and onsite warranty from HPE

This is a single-socket AMD EPYC server with no built-in network ports. The DL345 Gen12 takes exactly one 5th Gen EPYC 9005 processor, and HPE lists no embedded Ethernet — only the dedicated iLO port — so every build needs an OCP 3.0 or PCIe adapter before it can join a network. Memory is DDR5-6400 RDIMM only, and the chassis you own (SFF/EDSFF, 8LFF or GPU) decides which drives will fit.

Specifications on this page are taken from the HPE QuickSpecs for this server, HPE ProLiant Compute DL345 Gen12 QuickSpecs, Version 12.

Shop DL345 Gen12 Parts by Category

Moving on from an earlier generation? We also stock parts for the HPE ProLiant DL345 Gen11, the HPE ProLiant DL385 Gen11, the rest of the range under HPE ProLiant DL rack server parts, and every model under HPE parts by server model.

DL345 Gen12 Parts FAQ

Is the DL345 Gen12 a single-socket server?
Yes. It takes exactly one 5th Generation AMD EPYC 9005 processor in an SP5 socket, with up to 192 cores, 128 PCIe 5.0 lanes and 12 memory channels on that one processor. There is no second socket to populate.

How much memory does the DL345 Gen12 support?
6TB, using 24 x 256GB DDR5 RDIMMs across its 24 slots. A full single-DIMM-per-channel fill of 12 x 256GB gives 3TB. HPE DDR5 Smart Memory RDIMMs only - LRDIMM and persistent memory are not supported.

How many drives fit in a DL345 Gen12?
Up to 24 SFF or 36 EDSFF E3.S drives in the SFF/EDSFF chassis, which can mix the two form factors; up to 12 LFF drives in the 8LFF chassis with the optional 4 LFF bay, or 8 LFF plus 2 SFF; and 8 SFF or 8 E3.S drives in the GPU chassis. An optional rear 2SFF cage is also listed.

Does the DL345 Gen12 have built-in network ports?
No. HPE lists no embedded network ports on this server, only the dedicated 1Gb iLO management port. Every build needs at least one OCP 3.0 or PCIe stand-up adapter, and the default rear OCP slot A is where most builds start.

Which GPUs does the DL345 Gen12 support?
NVIDIA L4 24GB, L40S 48GB, RTX PRO 4500 Blackwell 32GB and RTX PRO 6000 Blackwell 96GB. The server takes up to six single-width or four double-width GPUs; the L4 fits at the rear of the SFF/EDSFF and LFF chassis, while the double-width cards install at the front of the GPU chassis.

Will DL345 Gen11 memory work in a DL345 Gen12?
Not if it is DDR5-4800 or DDR5-5600. The Gen12 document lists only DDR5-6400 kits and states that 5600 MT/s and 4800 MT/s DIMMs are not supported with its Turin processors. Some Gen11-named kits are listed for the Gen12, though - the DL3X5 Gen11 2U standard heat sink and fan kits and the DL3XX Gen11 Easy Install rail kit.

Looking for a specific DL345 Gen12 part? Browse our full selection below.

Parts Finder Narrow to your model…
Compare Selected