HP ProLiant ML350 Gen10 Parts

Unique Options
HPE ML350 Gen10 8SFF Hot Plug Drive Backplane Cage Kit
NOTE: Add additional 8 SFF Hot-Plug Hard Drive Cage, allowing for up to 24 SFF Drive support (8+8+8).
HPE ML350 Gen10 4LFF Hot Plug Drive Backplane Cage Kit
NOTE: Add additional 4 LFF Hot-Plug Hard Drive Cage, allowing for up to 12 LFF Drive support (4+4+4).
HPE ML350 Gen10 4LFF Non Hot Plug Drive Cage Kit
NOTE: Field upgrade only. Add additional 4 LFF Non-Hot-Plug Hard Drive Cage, allowing for up to 12 LFF NHP Drive support (4+4+4)
HPE ML350 Gen10 8SFF NVMe SSD Express Bay Enablement Kit with 2x4NVMe Risers and Support Cables
NOTE: This kit contains two x4 Direct Attach PCIe NVMe Riser Boards with each supporting up to 4 drives. When both Risers are installed, it supports 8 SFF NVMe drives.
NOTE: SFF NVMe SSDs to be ordered separately.
NOTE: NVMe drives require the addition of HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21)
HPE ML350 Gen10 RDX/LTO Media Drive Support Cable Kit with Fan Blank for Long LTO
NOTE: Supporting cables to add additional RDX/tape devices for data backup or archiving.
NOTE: RDX/tape devices to be ordered separately
HPE ML350 Gen10 Slimline ODD Bay and Support Cable Kit
NOTE: Mechanical converter with supporting cable
HPE ML350 Gen10 Redundent Fan Cage Kit with 4 Fan Modules
NOTE: Add additional 4 hot-plug fans installed in the fan cage to get N+1 fan redundancy and/or for advanced cooling. Refer to later section for detail.
HPE ML350 Gen10 Flex Slot Redundant Power Supply Cage Kit with Power Distribution Board
NOTE: Field upgrade only. Allowing field upgrade from the 500W standard PSU/non-hot-plug/non-RPS to support HPE Flex Slot RPS.
HPE ML350 Gen10 GPU External Power Cable Kit
NOTE: Consists of two external power cables to feed power to GPU modules with TDP larger than 75W.
Back to top
Processors
Processor Option Kits
HPE ML350 Gen10 Intel Xeon-Bronze 3104 (1.7GHz/6-core/85W) Processor Kit
NOTE: Up to two processors supported. Performance Models include two processors
NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology
NOTE: Turbo2: Intel Turbo Boost Technology 2.0 provides more computing power when you need it with performance that adapts to spikes in your workload and delivers more performance upside than then previous generation turbo technology
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: The xxxxxx-L21 is the first processor shipped, the xxxxxx-B21 is the 2nd processor and ships with 2 additional fans for factory of field installation.
NOTE: Maximum memory per socket depends on the processor selected.
NOTE: Processors above 85W use a Performance Heatsink.
NOTE: 2P models require the Redundant Fan Cage kit (874572-B21) which consists of one fan cage along with 4 additional fans.
Back to top
Memory
HPE 16GB (1x16GB) Dual Rank x8 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit
NOTE: Memory DIMM availability with a server platform is dependent upon completion of certification testing.
NOTE: The maximum memory speed is a function of the memory type, memory configuration, and processor model.
$549.00 $499.00
Back to top
Optical Drives
HPE 9.5mm SATA DVD-ROM JackBlack Gen9 Optical Drive
NOTE: The HPE ML350 Gen10 Slimline ODD Bay Kit (874577-B21) is required for this option
HPE 9.5mm SATA DVD-RW JackBlack G9 Optical Drive
NOTE: The HPE ML350 Gen10 Slimline ODD Bay Kit (874577-B21) is required for this option.
HPE Mobile USB Non Leaded System DVD RW Drive
NOTE: This is only supported on USB 3.0 ports
NOTE: When front drive cages are fully populated (Box 1
$361.00 $255.00
Back to top
Drives
Enterprise - 12G SAS - SFF Drives
HPE 2.4TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty 512e Digitally Signed Firmware HDD
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required for 10K, 15K or higher RPM SAS drives
Enterprise - 12G SAS - LFF Drives
Midline - 12G SAS - SFF Drives
Midline - 12G SAS - LFF Drives
Midline - 6G SATA - SFF Drives
Midline - 6G SATA - LFF Drives
6G SATA - LFF NHP/Raw Drives
Write Intensive
Read Intensive - 12G SAS - SFF - Solid State Drives
Read Intensive - 6G SATA - SFF - Solid State Drives
Mixed Use - 12G SAS - SFF - Solid State Drives
Mixed Use - 6G SATA - SFF - Solid State Drives
Read Intensive - 6G SATA - LFF - Solid State Drives
Mixed Use - 12G SAS - LFF - Solid State Drives
M.2 Selection
NOTE: Requires the M.2 universal enablement card kit (878783-B21) and use S100i SATA controller only.
NOTE: Installation of the M.2 universal enablment card kit is limited to PCIe slot 1, 2, 3 or 4. Max. in ML350 Gen10 is one M.2 enablment card kit
NOTE: M.2 supports Software RAID only
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required for M.2 drives support
Mixed Use - 6G SATA - M.2 - Solid State Drives
HPE 1.92TB SATA 6G Mixed Use M.2 2280 3yr Wty Digitally Signed Firmware SSD
NOTE: Requires the M.2 universal enablement card kit (878783-B21) and use S100i SATA controller only.
NOTE: M.2 supports Software RAID only.
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required for M.2 drives.
Read Intensive - 6G SATA - M.2 - Solid State Drives
HPE 1.92GB SATA 6G Read Intensive M.2 2280 3yr Wty Digitally Signed Firmware SSD
NOTE: Requires the M.2 universal enablement card kit (878783-B21) and use S100i SATA controller only
NOTE: M.2 supports Software RAID only.
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required for M.2 drives.
NVMe SSD Selection
NOTE: HPE ML350 Gen10 NVMe 8SFF Exp Bay Kit (874569-B21) is required to support these drives.
NOTE: Max. support is one Gen10 ML350 NVMe 8SFF Exp Bay Kit (874569-B21) which can support up to 8 NVMe solid state drives.
NOTE: NVMe support is limited in SFF systems.
NOTE: NVMe drives require the addition of HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21).
NOTE: Not supported by HPE Smart Array controllers
NOTE: HPE has qualified the NVMe drive portfolio using the Operating System inbox drivers, full detail on the HPE Solid State Drive QuickSpecs
Read Intensive - NVMe - SFF - Solid State Drives
Mixed Use - NVMe - SFF - Solid State Drives
Hard Drive Blank Kits
Hard Drive Kits
HPE Universal SATA HHHL 3yr Wty M.2 Kit
NOTE: HPE M.2 universal enablement card kit (878783-B21), which is required for SATA M.2 support
NOTE: Installation of this M.2 enablment card kit is limited to PCIe slot 1, 2, 3 or 4. Max. in ML350 Gen10 is one M.2 enablment card kit.
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required when this card kit is selected/installed for M.2 SSD support.
HPE ML350 Gen10 8SFF NVMe SSD Express Bay Enablement Kit with 2x4NVMe Risers and Support Cables
NOTE: This kit contains two x4 Direct Attach PCIe NVMe Riser Boards with each supporting up to 4 NVMe drives. When both Risers are installed, it supports 8 SFF NVMe drives.
NOTE: Max. support is one Gen10 ML350 NVMe 8SFF Exp Bay Kit (874569-B21) with installation limited to Box 2 based on cable routing requirement
NOTE: SFF NVMe SSDs to be ordered separately
NOTE: NVMe support is limited in SFF systems.
NOTE: NVMe drives require the addition of HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21)
Media/ODD Bay Kits
HPE ML350 Gen10 RDX/LTO Media Drive Support Cable Kit with Fan Blank for Long LTO
NOTE: Supporting cables to add additional RDX/tape devices for data backup or archiving
NOTE: RDX/tape devices to be ordered separately
HPE ML350 Gen10 Slimline ODD Bay and Support Cable Kit
NOTE: Mechanical converter with supporting cable.
Back to top
InfiniBand
HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required to support this card.
HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required to support this card
HPE 100Gb 1-port OP101 QSFP28 x16 PCIe Gen3 with Intel Omni-Path Architecture Adapter
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required to support this card
HPE 100Gb 1-port OP101 QSFP28 x8 PCIe Gen3 with Intel Omni-Path Architecture Adapter
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required to support this card.
Back to top
Power Supplies
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard C-14 power inlet connector
HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit
NOTE: Flex Slot Titanium power supplies support power efficiency of up to 96% and include a standard C-14 power inlet connector
HPE 800W Flex Slot Universal Hot Plug Low Halogen Power Supply Kit
NOTE: Flex Slot universal power supplies support power efficiency of up to 94% and support both 277VAC/380VDC power inputs
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard C-14 power inlet connector
HPE 800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply Kit
NOTE: Flex Slot -48VDC power supplies support power efficiency of up to 94%.
HPE 500W Low Halogen FIO Power Supply Kit
NOTE: Support power efficiency of up to 92%.
HPE ML350 Gen10 Flex Slot Redundant Power Supply Cage Kit with Power Distribution Board
NOTE: Field upgrade only. Allowing field upgrade from the 500W standard PSU/non-RPS, non-hot-plug to support HPE Flex Slot RPS.
NOTE: Please check the total power requirement of your selected configuration with the GPU(s) supported in this platform with the HPE Power Advisor Tool located at http://www.hpe.com/info/hppoweradvisor
NOTE: The ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required for all GPU installations. (Note, the redundant fan kit ships as standard with the two 2P Performance models and the Rack CTO)
NOTE: Mixing of GPUs is not supported
NOTE: These GPUs are not recommended for use in office environment especially under stress mode when system fans are running at full speed.
NOTE: HPE ML350 Gen10 GPU Ext Power Cable Kit (877628-B21) is required for GPU TDP larger than 75W.
Back to top
Computation and Graphics Accelerators
HPE NVIDIA Quadro P6000 Graphics Accelerator
NOTE: HPE ML350 Gen10 GPU Ext Power Cable Kit (877628-B21) is required.
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required.
NVIDIA Tesla M10 Quad GPU Module
NOTE: HPE ML350 Gen10 GPU Ext Power Cable Kit (877628-B21) is required
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required.
HPE NVIDIA Tesla P40 24GB Computational Accelerator
NOTE: HPE ML350 Gen10 GPU Ext Power Cable Kit (877628-B21) is required.
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required.
Graphics Cable Kits
HPE ML350 Gen10 GPU External Power Cable Kit
NOTE: This kit consists of two external power cables to feed power to GPU modules with TDP larger than 75W
Back to top
Cooling Options
HPE ML350 Gen10 Redundent Fan Cage Kit with 4 Fan Modules
NOTE: This kit is required for elevated Ambient temperature environments
NOTE: Add add
NOTE: The performance 2P BTO models and the Rack CTO model will already include this kit to include 6 fans total.
NOTE: The ML350 Gen10 Redundant Fan Kit (874572-B21) is required for one of the following configurations or situations:
1. 2P configuration.
2. When the unit is configured to use in Rack mode.
3. When front storage is fully populated with (3) 4LFF or (3) 8SFF drive cages or (2) LFF or SFF drive cages along with (2) media bays and (1) DVD.
4. When ML350 Gen10 is used in ASHRAE 3 or 4 environment.
5. When the unit is configured with higher RPM SAS HDDs (10K, 15K or higher).
6. When the unit is configured with NVMe Express Bay for NVMe SSD support.
7. When M.2 is selected.
8. The ML350 Gen10 Redundant Fan Cage Kit is also needed to support certain higher end PCIe expansion cards for example, GPU (Graphic Processing Unit), advanced PCIe accelerators, InfiniBand cards, higher-end network adapters and P816i-a controller
NOTE: Please refer to the User Guide for special configuration scenarios where the redundant fan option is required but does not provide redundancy function.
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for additional information
Back to top
Storage Controllers
The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed breakout of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10 Controllers Data Sheet.
NOTE: All performance RAID controllers are supported by the HPE Smart Storage Battery (875241-B21), which supports multiple devices and is sold separately
HPE Smart Array P816i-a SR Gen10 (16 Internal Lanes/4GB Cache/SmartCache) 12G SAS Modular Controller
NOTE: Does not occupy a PCIe expansion slot and includes SmartCache license.
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required for P816i-a.
NOTE: For information on the HPE Smart Array P816i-a SR Gen10 Controller please refer to their QuickSpecs.
HPE Smart Array P408i-a SR Gen10 (8 Internal Lanes/2GB Cache) 12G SAS Modular Controller
NOTE: Does not occupy a PCIe expansion slot
NOTE: For information on the HPE Smart Array P408i-a SR Gen10 Controller please refer to their QuickSpecs.
HPE Smart Array P408i-p SR Gen10 (8 Internal Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller
NOTE: For information on the HPE Smart Array P408i-p SR Gen10 Controller please refer to their QuickSpecs.
HPE Smart Array P408e-p SR Gen10 (8 External Lanes/4GB Cache) 12G SAS PCIe Plug-in Controller
NOTE: For information on the HPE Smart Array P408e-p SR Gen10 Controller please refer to their QuickSpecs
Essential RAID Controllers
HPE Smart Array E208i-a SR Gen10 (8 Internal Lanes/No Cache) 12G SAS Modular Controller
NOTE: Does not occupy a PCIe expansion slot.
NOTE: For information on the HPE Smart Array E208i-a SR Gen10 Controller please refer to their QuickSpecs
HPE Smart Array E208i-p SR Gen10 (8 Internal Lanes/No Cache) 12G SAS PCIe Plug-in Controller
NOTE: For information on the HPE Smart Array E208i-p SR Gen10 Controller please refer to their QuickSpecs
HPE Smart Array E208e-p SR Gen10 (8 External Lanes/No Cache) 12G SAS PCIe Plug-in Controller
NOTE: For information on the HPE Smart Array E208e-p SR Gen10 Controller please refer to their QuickSpecs
HPE Cable Options and SAS Expander Kit
HPE ML350 Gen10 12Gb SAS Expander Card Kit with Cables
NOTE: For details on cabling options, additional information available here: Cabling Matrix
Optional Software
HPE Smart Array SR SmartCache (Single Key/Multiple Servers) E-LTU
NOTE: SmartCache is offered on HPE Smart Array performance RAID controllers and comes standard (no licensing is required) if the HPE Smart Array P816i-a SR Gen10 Controller is installed in the server.
Optional Upgrades
HPE 96W Smart Storage Battery (up to 20 Devices/260mm Cable) Kit
NOTE: Provides backup power for multiple HPE Smart Array controllers or other devices. Is required with performance RAID controllers
Back to top
Tape Backup
NOTE: Internal half-height (5.25
NOTE: Installation of the internal LTO tape drive is limited in media bay 1
NOTE: For the complete range of tape drives, autoloaders, libraries and media see: https://www.hpe.com/us/en/storage/storeever-tape-storage.html. For hardware and software compatibility of Hewlett Packard Enterprise tape backup products
For hardware and software compatibility of Hewlett Packard Enterprise tape backup products see:
Back to top
Rack Options
NOTE: Please see the HPE KVM Switches web page for information on these products and their specifications
Rail Kits
NOTE: Ball bearing and Easy Install rail kits contain telescoping rails which allow for in-rack serviceability.
NOTE: To assist in the installation of the server into the rack an optional installation tool is available by contacting your local services representative (695539-001).
CAUTION: Hewlett Packard Enterprise recommends that a minimum of two people are required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.
HPE ML Gen10 Tower to Rack Conversion Kit with Sliding Rail Rack Shelf and Cable Management Arm
NOTE: Easy install rack rail tray which takes up 1U height in a standard rack facility. This kit is supported in both ML350 and ML110 Gen10 for tower to rack conversion. This kit includes CMA and is shipped as standard in the 2P Performance Rack SKU and SFF Rack CTO.
Back to top

Last updated: 11/17/2017

Need help finding the correct part? Live Chat operators are standing by. LET US HELP