HPE ProLiant DL560 Gen11 Parts

2U rack serverTwo or four 4th Gen Intel Xeon Scalable processors

The HPE ProLiant DL560 Gen11 is a 2U rack server for two or four 4th Gen Intel Xeon Scalable processors of the same model, and it takes one memory family: HPE DDR5-4800 registered kits. Whether it runs two processors or four decides the heat sink, the processor models it can take and the E3.S drive count. This page lists the 219 parts HPE's QuickSpecs list for it, by part type.

  • 219 HPE-listed parts
  • 64 DIMM slots, up to 16TB
  • Up to 24 SFF drives, or 24 E3.S with 4 processors
  • Up to 6 PCIe 5.0 slots and 2 OCP slots
  • Flex Slot power, 800W to 1800W-2200W

Specifications: HPE QuickSpecs a50006983enw, version 34 (October 5, 2026). Memory and drive figures match the DL560 Gen11 Memory and Drives pages.

Shop DL560 Gen11 parts by type

More DL560 Gen11 parts: chassis, expansion and enablement

Most ordered from this list

The parts on this page our customers order most, for any server.

  1. DrivesP28352-B212.4TB SAS 12G Mission Critical 10K SFF BC 512e Multi Vendor HDD
  2. Boot devicesP48183-B21NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device
  3. MemoryP43328-B2132GB (1x32GB) Dual Rank x8 DDR5-4800 CAS-40-39-39 EC8 Registered Smart Memory Kit
  4. DrivesP40498-B21960GB SATA 6G Read Intensive SFF BC Multi Vendor SSD
  5. DrivesP28586-B211.2TB SAS 12G Mission Critical 10K SFF BC Multi Vendor HDD
  6. DrivesP40500-B213.84TB SATA 6G Read Intensive SFF BC Multi Vendor SSD
  7. DrivesP40505-B213.84TB SATA 6G Mixed Use SFF BC Multi Vendor SSD
  8. Fibre Channel HBAsR2E09ASN1610Q 32Gb 2-port Fibre Channel Host Bus Adapter
  9. DrivesP40504-B211.92TB SATA 6G Mixed Use SFF BC Multi Vendor SSD
  10. DrivesP40512-B213.84TB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor SSD

DL560 Gen11 at a glance

Processors

Two or four 4th Gen Intel Xeon Scalable processors, all of the same model: HPE says up to four, and its configuration rules cover two-processor and four-processor servers only. All nine are H models: Platinum 8490H, 8468H, 8460H, 8450H and 8444H, Gold 6448H, 6434H, 6418H and 6416H.

Processors ship without heat sinks. With two, every model takes the DL380/DL560 Gen11 High Performance 2U Heat Sink Kit (P48818-B21). With four in the air-cooled model, only the 6416H, 6418H, 6448H and 8450H are supported, on the DL3XX/560 Gen11 High Performance Heat Sink Kit (P48905-B21).

The 6434H, 8444H, 8460H, 8468H and 8490H run four to a server only in the liquid-cooled model, which takes only those five. HPE fits its heat sink at the factory and does not convert an air-cooled server to liquid cooling.

A two-processor server needs HPE's 2P air baffle and 2P UPI pass-through kits. For four processors, HPE lists the 4P CPU Mezzanine Kit (P54803-B21) and requires the OCP x16 to Mezzanine Board Enablement Kit (P55324-B21); for two, it requires the OCP x16 to Motherboard Enablement Kit (P55322-B21). DL560 Gen11 Processors

Memory

64 DIMM slots, 16 per processor on 8 channels, for HPE DDR5-4800 registered kits, which HPE supports with 4th Gen processors only: 4800 MT/s with one DIMM per channel, 4400 MT/s with two.

HPE rates the server at 16TB with 256GB DIMMs in all 64 slots, subject to its CPU, storage and memory support matrix; its kit list stops at 128GB, 8TB with four processors. Two processors use their 32 slots. The matrix limits DIMM size by drive configuration: with four processors and 24 SFF drives it rates only 64GB and smaller DIMMs, and 256GB DIMMs are rated at a 25°C inlet at most, 20°C in most four-processor configurations, and with two processors only with one 8SFF cage and no media bay.

Install DIMMs in even numbers. 96GB kits fill half or all of each processor's slots and do not mix with any other capacity; 3DS and non-3DS memory do not mix. In the liquid-cooled model a 128GB kit must be the Quad Rank P63345-B21, not the list's Dual Rank P69974-B21. DL560 Gen11 Memory

Drives

Up to 24 SFF drives in three 8SFF cages, or up to 16 E3.S NVMe drives with two processors and 24 with four, direct attach in 12EDSFF cages in Box 2 and 3. With four processors, drive cages go in Box 2 first, then Box 3, then Box 1; with two, Box 3 first, then Box 2, then Box 1.

With four processors, 24 SFF drives need the air-cooled model, and HPE's thermal tables then tie them to the network adapter: with many adapters only with the Gold 6416H or 6418H, with some not at all.

The CTO servers ship without a drive cage. x1 and x4 cage kits do not mix, nor do x1, x4 tri-mode and EDSFF cage kits, and direct attach drives do not mix with tri-mode controller drives.

One NS204i-u NVMe boot device fits at the front or at the rear, in slot 4 of a second riser. At the front, HPE does not support it with four processors and 24 SFF drives, nor in the liquid-cooled model with the Media Bay or two 12EDSFF cages. DL560 Gen11 Drives

Storage controllers

Embedded hybrid RAID (Intel VROC) with 8 SATA ports; Intel VROC Premium for NVMe SSDs, UEFI only. HPE tri-mode controllers: MR216i-p, MR216i-o, MR408i-o, MR416i-p, MR416i-o and the SR932i-p, which needs an x16 slot; the Smart Array E208e-p for external SAS.

Controllers with cache need the 96W Smart Storage Battery or the Smart Hybrid Capacitor, each with a 260mm cable. DL560 Gen11 Storage Controllers

Networking

No embedded network ports: an OCP or a stand-up PCIe network adapter is required. Two OCP 3.0 slots and a dedicated 1Gb iLO port. DL560 Gen11 Networking Adapters

Expansion

Up to 6 PCIe 5.0 slots on two riser kits, x8/x16/x8 or x16/x16/x16, either one as the primary riser (slots 1-3) or the secondary (slots 4-6). The x16/x16/x16 riser needs its cable kit: P55315-B21 to the system board with two processors, P55319-B21 to the mezzanine board with four.

A GPU needs the GPU Enablement Kit (P54816-B21); double-wide GPUs go only in slots 2 and 5. HPE supports the L40 GPU neither in the liquid-cooled model nor with 24 SFF drives. Riser cards

Power

Two or four Flex Slot hot-plug power supplies (1+1, 2+2 or 3+1) from 800W to 1800W-2200W, including a 1600W -48VDC model. The 1600W Platinum and 1800W-2200W supplies need 200VAC to 240VAC. All supplies in a server must match. DL560 Gen11 Power Supplies

Management

HPE iLO 6. Management hardware

Specifications from HPE QuickSpecs a50006983enw, version 34 (October 5, 2026). Memory figures match the DL560 Gen11 Memory page.

Before you order processors or heat sinks, check how many processors the server runs and how it is cooled. With two processors, any of the nine models fits, on the DL380/DL560 Gen11 High Performance 2U Heat Sink Kit (P48818-B21). With four, an air-cooled server takes only the Gold 6416H, 6418H, 6448H or Platinum 8450H, on the DL3XX/560 Gen11 High Performance Heat Sink Kit (P48905-B21); the Gold 6434H and Platinum 8444H, 8460H, 8468H and 8490H run four to a server only in the liquid-cooled model, which takes only those five. HPE does not convert an air-cooled server to liquid cooling. All processors must be the same model. Find the model in iLO under System Information › Processors.

Complete your DL560 Gen11 build

Gen10 or Gen11? How to tell

The processor model number tells the two DL560 generations apart, and it decides the memory you can buy.

What to checkDL560 Gen10DL560 Gen11 This page
Processor model numbersx1xx or x2xx: Gold 6130, Gold 6230x4xxH: Gold 6448H, Platinum 8490H
MemoryDDR4-2666 or DDR4-2933, 48 slotsDDR5-4800, 64 slots
Memory kits look likeP00922-B21, P00924-B21P43322-B21, P43328-B21
Parts pageDL560 Gen10 partsYou are here

From the HPE QuickSpecs of each server: HPE ProLiant DL560 Gen10 a00008181enw version 45; HPE ProLiant DL560 Gen11 a50006983enw version 34.

All 219 DL560 Gen11 parts

Grouped by part type; within each group the parts are in the order of HPE's QuickSpecs. Open a group, or type a part number or a few words to filter the whole list.

DL560 Gen11 parts questions

How much memory does the DL560 Gen11 support?

HPE rates it at 16TB: 64 slots with 256GB DDR5-4800 RDIMMs in every one, subject to its CPU, storage and memory support matrix. Its kit list stops at 128GB, which gives 8TB with four processors; with two processors only 32 slots are usable. The matrix limits DIMM size by drive configuration: with four processors and 24 SFF drives it rates only 64GB and smaller DIMMs, and 256GB DIMMs need an inlet of 25°C or lower (20°C in most four-processor configurations) and, with two processors, one 8SFF cage and no media bay. The kits are HPE DDR5-4800 registered DIMMs, for 4th Gen processors only. Install them in even numbers; 96GB kits fill half or all of each processor's slots and do not mix with any other capacity.

Which drives fit the DL560 Gen11?

2.5-inch SFF BC drives in SAS, SATA or U.3 NVMe in the 8SFF cages, and E3.S EC1 NVMe drives in the 12EDSFF cages. Which interfaces work depends on the cage kit and whether it connects to a tri-mode controller or with direct attach cables.

Which processors and heat sinks fit my DL560 Gen11?

Read the processor model in iLO under System Information › Processors. Every DL560 Gen11 processor is a 4th Gen Xeon Scalable H model (x4xxH), and all processors in a server must be the same model. With two processors, any of the nine fits, on the DL380/DL560 Gen11 High Performance 2U Heat Sink Kit (P48818-B21). With four in an air-cooled server, only the Gold 6416H, 6418H, 6448H and Platinum 8450H fit, on the DL3XX/560 Gen11 High Performance Heat Sink Kit (P48905-B21). The Gold 6434H and Platinum 8444H, 8460H, 8468H and 8490H run four to a server only in the liquid-cooled model, which takes only those five. HPE does not convert an air-cooled server to liquid cooling. For four processors, HPE lists the 4P CPU Mezzanine Kit (P54803-B21) and requires the OCP x16 to Mezzanine Board Enablement Kit (P55324-B21).

Is my server a DL560 Gen11 or a DL560 Gen10?

Check the processor model number. On these Xeon Scalable models, named Platinum or Gold, the second digit is the generation. The Gen11 runs 4th Gen processors with an H suffix (x4xxH, such as Gold 6448H or Platinum 8490H) and DDR5-4800 memory in 64 slots. The Gen10 runs 1st or 2nd Gen processors (x1xx or x2xx, such as Gold 6130 or Gold 6230) and DDR4 memory in 48 slots. Memory kits and processors differ between them, so buy those from the page for your generation.

Are refurbished parts on this list too?

Yes. A refurbished part carries the same HPE part number as a new one, so it is listed here under that number, and each listing shows its condition. Every part ships tested or factory sealed.

What warranty comes with DL560 Gen11 parts?

A replacement warranty of 1 to 5 years, depending on the part: memory is covered for 5 years, and many other parts for 1 or 3 years.

Other DL560 generations

DL560 Gen8 partsDL560 Gen9 partsDL560 Gen10 partsAll HPE parts by server model
Ships same dayMost orders ship the same business day
1 to 5 year warrantyTested or factory sealed
Purchase orders acceptedCard, P-card, ACH, wire or PayPal too
Drives98 parts

All drives on the DL560 Gen11 Drives page

HPE Hard Disk Drives

Mission Critical – 12G SAS – SFF Drives
Enterprise – 12G SAS – SFF Drives

Solid State Drives

Read Intensive – 12G SAS – SFF – Solid State Drives
Mixed Use – 12G SAS – SFF – Solid State Drives
Read Intensive – 6G SATA – SFF – Solid State Drives
Mixed Use – 6G SATA – SFF – Solid State Drives
Read Intensive – NVMe – SFF – Solid State Drives
  • P70436-B21 HPE 15.36TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 PS1010 SSD
  • P63841-B21 HPE 15.36TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 CM7 SSD
  • P70434-B21 HPE 7.68TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 PS1010 SSD
  • P63837-B21 HPE 7.68TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 CM7 SSD
  • P63833-B21 HPE 3.84TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 CM7 SSD
  • P50216-B21 HPE 1.92TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 PM1733a SSD
  • P61019-B21 HPE 1.92TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 Self-encrypting FIPS 140-3 CM7 SSD
  • P61027-B21 HPE 3.84TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 Self-encrypting FIPS 140-3 CM7 SSD
  • P61035-B21 HPE 7.68TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 Self-encrypting FIPS 140-3 CM7 SSD
  • P64846-B21 HPE 3.84TB NVMe Gen4 Mainstream Performance Read Intensive SFF BC U.3 Static V2 Multi Vendor SSD
  • P64848-B21 HPE 7.68TB NVMe Gen4 Mainstream Performance Read Intensive SFF BC U.3 Static V2 Multi Vendor SSD
Mixed Use – NVMe – SFF – Solid State Drives
NVMe Read Intensive – EDSFF E3.S - – Solid State Drives
NVMe Mixed Use – EDSFF E3.S - – Solid State Drives
HPE notes (2)
  • For 2P configuration: support max. 8 EDSFF per box (only box 2 and 3 supported).
  • For 4P configuration: support max. 12 EDSFF per fox (only box 2 and 3 supported).
Hard Drive Blank Kits
Memory6 parts

All memory on the DL560 Gen11 Memory page

Registered DIMMs (RDIMMs)
HPE notes (5)
  • Memory should be installed in even quantity of DIMMs
  • 4800 MT/s memory SKUs offer a transfer rate of 4800 MT/s at 1 DIMM per channel and 4400 MT/s at 2 DIMMs per channel.
  • Mixing of 3DS memory and non-3DS memory is not supported.
  • For 96 GB Smart Kit, it must be populated in half quantity or full quantity each CPU. (each CPU needs memory populated)
  • 96GB Smart kit cannot be mixed up with any other capacity memory module.
HPE DDR Blank Kit
Network adapters25 parts

All network adapters on the DL560 Gen11 Networking Adapters page

1 Gigabit Ethernet adapters
10 Gigabit Ethernet adapters
25 Gigabit Ethernet adapters
100 Gigabit Ethernet Adapters

OCP 3.0 Adapters

HPE InfiniBand

HPE note

Must be populated in x16 physical and electrical slot.

  • P45642-H23 HPE InfiniBand NDR200/Ethernet 200Gb 1-port OSFP PCIe5 x16 MCX75310AAS-HEAT Generic Adapter
Storage controllers7 parts

All storage controllers on the DL560 Gen11 Storage Controllers page

HPE Tri-Mode Controllers

Essential RAID Controllers

Drive cages and backplanes5 parts
  • P54798-B21 HPE ProLiant DL560 Gen11 8SFF x1 Tri-Mode U.3 Drive Cage Kit
    HPE note

    Mix of x1 cage kit and x4 cage kit is not supported. -

  • P54799-B21 HPE ProLiant DL560 Gen11 8SFF x4 U.3 NVMe Drive Cage Kit
    HPE note

    Mix of x1 cage kit and x4 cage kit is not supported.

  • P54801-B21 HPE ProLiant DL560 Gen11 2SFF U.3 Drive Cage Kit
  • P54802-B21 HPE ProLiant DL560 Gen11 12EDSFF Drive Cage Kit
    HPE note

    Mix of x1, x4Trimode or EDSFF drive cage kit is not supported.

  • P60500-B21 HPE ProLiant DL560 Gen11 SFF Universal Media Bay Kit
    HPE note

    The Universal Media bay provides front DisplayPort and 2xUSB 2.0; plus 2x SFF front drives or 2 NVME front drives and ODD support (not included); and can only be located in Box1 with either an 8 SFF or 8+8 SFF model. Please refer to CPU/Memory/Storage matrix. This is a SFF model option only.

Riser cards4 parts

HPE I/O Expansion Options

HPE note

x16 cards installed on x8 slots could observe sub-optimal performance.

  • P54779-B21 HPE ProLiant DL560 Gen11 x8/x16/x8 Riser Kit
    HPE note

    Slot 1 - – PCIe 5.0 x8 Full height and ¾ length. Slot 2 - – PCIe 5.0 x16 Full Height and ¾ length. Slot 3 - – PCIe 5.0 x8 Full Height and ¾ length.

  • P54780-B21 HPE ProLiant DL560 Gen11 x16/x16/x16 Riser Kit
    HPE note

    Slot 1 - – PCIe 5.0 x16 Full Height and ¾ length. Slot 2 - – PCIe 5.0 x16 Full Height and ¾ length. Slot 3 - – PCIe 5.0 x16 Full Height and ¾ length. When 3x16 riser is selected, required to have either cable (P55315-B21 or P55319-B21) to connect with Motherboard (for 2P) or Mezzanine board (for 4P).

  • P55315-B21 HPE ProLiant DL560 Gen11 3x16 Riser to Motherboard Cable Kit
    HPE note

    Required when configure 2P system to connect to motherboard with HPE ProLiant DL560 Gen11 x16/x16/x16 Riser Kit (P54780-B21).

  • P55319-B21 HPE ProLiant DL560 Gen11 3x16 Riser to Mezzanine Board Cable Kit
    HPE note

    Required when configure 4P system to connect to Mezzanine board with HPE ProLiant DL560 Gen11 x16/x16/x16 Riser Kit (P54780-B21).

Power supplies6 parts

All power supplies on the DL560 Gen11 Power Supplies page

HPE notes (4)
  • Select a minimum (2), maximum (4) power supplies.
  • Support Redundancy 1+1, 2+2, 3+1.
  • 1600W Power supplies only support high line voltage (200VAC to 240VAC).
  • All power supplies in a server should match. Mixing Power Supplies is not supported.

HPE Flex Slot Power Supplies

Processors12 parts

All processors on the DL560 Gen11 Processors page

4th Generation Intel Xeon-Platinum
HPE note

All SKUs below ship with processor only. Adequate fans and heatsinks must be selected.

  • P49630-B21 Intel Xeon-Platinum 8490H 1.9GHz 60-core 350W Processor for HPE
  • P49629-B21 Intel Xeon-Platinum 8468H 2.1GHz 48-core 330W Processor for HPE
  • P49628-B21 Intel Xeon-Platinum 8460H 2.2GHz 40-core 330W Processor for HPE
  • P49626-B21 Intel Xeon-Platinum 8450H 2.0GHz 28-core 250W Processor for HPE
  • P49625-B21 Intel Xeon-Platinum 8444H 2.9GHz 16-core 270W Processor for HPE
4thGeneration Intel Xeon-Gold
  • P49622-B21 Intel Xeon-Gold 6448H 2.4GHz 32-core 250W Processor for HPE
  • P49623-B21 Intel Xeon-Gold 6434H 3.7GHz 8-core 195W Processor for HPE
  • P49621-B21 Intel Xeon-Gold 6418H 2.1GHz 24-core 185W Processor for HPE
  • P49620-B21 Intel Xeon-Gold 6416H 2.2GHz 18-core 165W Processor for HPE

Heat Sink Kit

2P/4P Configuration Kits

  • P54803-B21 HPE ProLiant DL560 Gen11 4P CPU Mezzanine Kit
Cable kits23 parts
Tri-Mode Cage Cable Kits
  • P55320-B21 HPE ProLiant DL560 Gen11 Tri-Mode Box 1/2 Cable Kit
    HPE note

    4P system storage configurations start with box 2. Upgradable to box 3 and then box 1.

  • P59144-B21 HPE ProLiant DL560 Gen11 Tri-Mode Box 3 Cable Kit
    HPE note

    2P system storage configurations start with Box3, upgradable to box 2 and then box 1.

Direct Attach Cable Kit Options
HPE note

Mix up with direct attach drives and Trimode storage controller drives is not supported.

  • P55321-B21 HPE ProLiant DL560 Gen11 Air Cooling 8SFF x4 NVMe Box 1 for 4P Direct Attach Cable Kit
  • P61767-B21 HPE ProLiant DL560 Gen11 Liquid Cooling 8SFF x4 NVMe Box 1 for 4P Direct Attach Cable Kit
  • P60005-B21 HPE ProLiant DL560 Gen11 Air Cooling 8SFF x4 NVMe Box 2 for 2P Direct Attach Cable Kit
  • P55316-B21 HPE ProLiant DL560 Gen11 Air Cooling 8SFF x4 NVMe Box 2 for 4P Direct Attach Cable Kit
  • P61770-B21 HPE ProLiant DL560 Gen11 Liquid Cooling 8SFF x4 NVMe Box 2 for 4P Direct Attach Cable Kit
  • P58338-B21 HPE ProLiant DL560 Gen11 Air Cooling 8SFF x4 NVMe Box 2 for 4P 24SFF Direct Attach Cable Kit
  • P60007-B21 HPE ProLiant DL560 Gen11 Air Cooling 8SFF x4 NVMe Box 3 for 2P Direct Attach Cable Kit
  • P58339-B21 HPE ProLiant DL560 Gen11 Air/Liquid Cooling 8SFF x4 NVMe Box 3 for 4P Direct Attach Cable Kit
  • P59141-B21 HPE ProLiant DL560 Gen11 Air/Liquid Cooling 8SFF SATA Box 3 SFF Direct Attach Cable Kit
  • P55325-B21 HPE ProLiant DL560 Gen11 Air Cooling 12EDSFF x4 Box 2 for 4P Direct Attach Cable Kit
  • P55328-B21 HPE ProLiant DL560 Gen11 Liquid Cooling 12EDSFF x4 Box 2 for 4P Direct Attach Cable Kit
  • P60011-B21 HPE ProLiant DL560 Gen11 Air Cooling 12EDSFF x4 Box 2 for 2P Direct Attach Cable Kit
    HPE note

    2P configurations support up to total 16 EDSFF.

  • P55326-B21 HPE ProLiant DL560 Gen11 Air/Liquid Cooling 12EDSFF x4 Box 3 for 4P Direct Attach Cable Kit
  • P60013-B21 HPE ProLiant DL560 Gen11 Air Cooling 12EDSFF x4 Box 3 for 2P Direct Attach Cable Kit
    HPE note

    2P configurations support up to total 16 EDSFF.

OCP Cable Kit Options
  • P60009-B21 HPE ProLiant DL560 Gen11 OCP1/2 to Box 2/1 x1 Backplane Cable Kit
  • P61602-B21 HPE ProLiant DL560 Gen11 OCP2 to Box 1/2 x2 Backplane Cable Kit
    HPE note

    Required x4 Tri-Mode U.3 Drive Cage Kit.

  • P61603-B21 HPE ProLiant DL560 Gen11 OCP1 to Box 3 x2 Backplane Cable Kit
    HPE note

    Required x4 Tri-Mode U.3 Drive Cage Kit, support also OCP1 to Box3 x1 configuration.

  • P59142-B21 HPE ProLiant DL560 Gen11 OCP2 to Box 2 x4 Backplane Cable Kit
  • P55318-B21 HPE ProLiant DL560 Gen11 OCP1 to Box 3 x1/x4 Backplane Cable Kit
  • P55322-B21 HPE ProLiant DL560 Gen11 OCP x16 to Motherboard Enablement Kit
    HPE note

    Required for 2P configuration.

  • P55324-B21 HPE ProLiant DL560 Gen11 OCP x16 to Mezzanine Board Enablement Kit
    HPE note

    Required for 4P configuration.

Fibre Channel HBAs8 parts
Emulex Fiber Channel HBAs
QLogic Fiber Channel HBAs
Boot devices3 parts
  • P48183-B21 HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device
    HPE note

    Max = 1. When NS204i-u is selected, a second riser card must be selected to locate in secondary riser slot for rear side. NS204i-u Boot device can only be installed in the 1st slot of secondary riser kit (slot 4) in for rear side. For liquid cooling solution, with NS204i-u in front location, system does not support Media Bay.

  • P55549-B21 HPE ProLiant DL560 Gen11 NS204i-u Front Enablement Kit
  • P55710-B21 HPE ProLiant DL380a/DL560 Gen11 NS204i-u Rear Enablement Kit
Smart Storage battery2 parts
Optical drives3 parts
Tape backup8 parts
Tape Drives
Security3 parts
  • 875519-B21 HPE Bezel Lock Kit
    HPE note

    This option can be selected only if HPE Gen11 2U Bezel Kit (P50400-B21) is selected.

  • P48922-B21 HPE ProLiant DL3XX Gen11 Intrusion Cable Kit
  • P50400-B21 HPE Gen11 2U Bezel Kit
Rack options2 parts
HPE note

Hewlett Packard Enterprise recommends that a minimum of two people are required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.

  • P61501-B21 HPE ProLiant DL560 Gen11 Ball Bearing Rail 8 Kit
    HPE note

    Does not include Cable Management Arm (CMA).

  • P28726-B21 HPE Apollo 4200 Gen10 Plus Cable Management Arm
Management hardware2 parts
  • P48824-B21 HPE ProLiant DL380/DL560 Gen11 2U Rear Serial Port Cable Kit
    HPE note

    Required for serial port support on the rear side.

  • P54810-B21 HPE ProLiant DL560 Gen11 System Insight Display Kit
GPUs2 parts

HPE Graphics Accelerators

  • P54816-B21 HPE ProLiant DL560 Gen11 GPU Enablement Kit
  • S0K90C NVIDIA L40 48GB PCIe Accelerator for HPE
    HPE note

    while selecting Accelerator card, the GPU enablement kit is required.

Ships same dayMost orders ship the same business day
1 to 5 year warrantyReplacement coverage on every part
5,000+ five-star reviewsShopper Approved, BBB A+ rating
Ships to 120+ countriesBy UPS; duties are collected by the carrier

Building out several servers, or need a part not listed?

Send the part numbers and quantities for each server and we reply to every quote request within 24 hours. Live chat is the fastest way to reach us.

!