HPE ProLiant DL365 Gen11 Drives

Upgrade your HPE ProLiant DL365 Gen11 server with genuine hot-plug drives. This compute-dense 1U dual-socket AMD EPYC platform supports 2.5-inch (SFF) and EDSFF (E3.S) drives across SAS, SATA, and NVMe interfaces — and every drive we sell is guaranteed compatible with your DL365 Gen11.

DL365 Gen11 Drive Specifications

• Form factors & bays: 2.5-inch SFF (up to 10 hot-plug bays) and E3.S EDSFF NVMe (up to 20 bays). The DL365 Gen11 is offered in SFF and EDSFF chassis only — there is no LFF option.
• Interfaces & types: SAS (24G, backward-compatible to 12G), SATA (6G), and NVMe (U.3 and E3.S, PCIe Gen5) — available as both hard drives (HDD) and solid-state drives (SSD).
• Capacities: SSDs from 240GB up to 15.36TB; SFF HDDs up to 2.4TB.
• Carriers: HPE Gen11 SFF Basic Carrier (BC) for SAS/SATA/U.3 NVMe, and EDSFF carrier for E3.S NVMe.
• Boot & RAID: optional NS204i-u boot device (two M.2 NVMe SSDs in RAID 1) plus HPE SR/MR-series Smart Array / TriMode controllers. Note: AMD EPYC platforms have no embedded RAID, so an HPE storage controller is required for hardware RAID.

Before you order, match the drive to your chassis and backplane. The DL365 Gen11 ships in SFF and EDSFF chassis with different backplanes, so confirm three things: the form factor (2.5-inch SFF or E3.S EDSFF), the interface your backplane supports (SAS, SATA, or NVMe), and the correct Gen11 carrier. TriMode (U.3) backplanes accept SAS, SATA, or NVMe in the same bay, but NVMe requires an NVMe-capable backplane.

Drive Form Factors, Interfaces & Carriers

The DL365 Gen11 packs flexible storage into a dense 1U chassis. SFF (2.5-inch) starts at 8 front bays and expands to 10 with the optional dual-bay cage, accepting SAS, SATA, or U.3 NVMe on TriMode backplanes. EDSFF (E3.S) is an all-NVMe option scaling to 20 PCIe Gen5 drives for maximum flash density. The DL365 Gen11 does not offer a 3.5-inch LFF chassis.

On TriMode (U.3) backplanes, a single bay can take a SAS, SATA, or NVMe drive, giving you room to mix media as needs change. SFF drives use HPE's Gen11 Basic Carrier (BC) — distinct from the Smart Carrier used on Gen10 and Gen10 Plus servers — so confirm your drives ship in the correct Gen11 carrier for proper fit, hot-plug operation, and status-LED function. For the full drive cage, backplane, and capacity matrix, see the official HPE QuickSpecs:

HPE ProLiant DL365 Gen11 QuickSpecs (PDF)

DL365 Gen11 Drive FAQ

What drives are compatible with the HPE DL365 Gen11?
Hot-plug SAS, SATA, and NVMe drives in 2.5-inch SFF or E3.S EDSFF form factors, as both HDDs and SSDs. The drive's form factor and interface must match your installed chassis and backplane, and SFF drives should use the Gen11 Basic Carrier.

How many drives does the DL365 Gen11 support?
Up to 10 SFF (2.5-inch) drives or up to 20 E3.S EDSFF NVMe drives, depending on the chassis. The DL365 Gen11 does not offer a 3.5-inch LFF configuration.

Does the DL365 Gen11 support NVMe SSDs?
Yes. It supports U.3 NVMe in 2.5-inch bays (on TriMode/U.3 backplanes) and up to 20 E3.S EDSFF NVMe drives, both over PCIe Gen5.

What carrier do DL365 Gen11 drives use?
2.5-inch drives use HPE's Gen11 Basic Carrier (BC), which differs from the Smart Carrier used on Gen10 and Gen10 Plus servers. Be sure any drive you buy ships in the correct Gen11 carrier so it seats properly and reports drive status correctly.

✅ Need help finding the right DL365 Gen11 drive? Browse our full selection above, or contact our HPE specialists for a guaranteed-compatible recommendation.

Why Global One?

• Trusted by thousands. Over 36,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
• HPE is our specialty! We only sell genuine HP Enterprise parts.
• EASY ordering process. Purchase online now with credit card or PayPal!
• FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.