HPE ProLiant DL365 Gen11 Storage Controllers
Ensure reliable and scalable storage on your HPE ProLiant DL365 Gen11 server with enterprise-grade RAID controllers and HBA adapters. Protect critical data and optimize storage performance.
Available DL365 Gen11 Storage Controllers:
- HPE Smart Array RAID Controllers – Enterprise-grade data protection.
- Host Bus Adapters (HBA) – Direct-attached storage (DAS) solutions.
- RAID Levels: RAID 0, 1, 5, 6, 10, 50, 60.
✅ Need a specific DL365 Gen11 storage controller? Browse our selection or contact us for assistance.
Storage Controllers

Notes:
- When selecting SR RAID controllers for external storage (E208e, 804398-B21) and MR RAID controllers for internal storage(MR216i/MR416i/MR408i) in the order, please be aware these two products use different RAID configuration tools.
- Not supporting mixing of MR (MegaRAID) series internal controllers and SR (SmartRAID) series internal controllers
- MR (MegaRAID) series controllers are not supported with Intelligent Provisioning feature
Essential RAID Controllers

Notes:
- This controller supports up to 8 SAS/SATA Drives (external)
- For more information on the HPE Smart Array E208i-p SR Gen10 Controller, please refer to the QuickSpecs
$333
$250.00
Tri-mode RAID Controllers

Notes:
- This is an OROC type controller which takes up an OCP slot
- This controller supports up to 16 SAS/SATA/NVMe Drives (Only 4 x4 NVMe drives can be supported; 8 x2 NVMe drives can be supported)
$980
$715.00

Notes:
- This is an OROC type controller which takes up an OCP slot
- This controller supports up to 8 SAS/SATA/NVMe Drives (Only 2 x4 NVMe drives can be supported; 4 x2 NVMe drives can be supported)
$1,029
$785.00

Notes:
- This is an OROC type controller which takes up an OCP slot
- This controller supports up to 16 SAS/SATA/NVMe Drives (Only 4 x4 NVMe drives can be supported; 8 x2 NVMe drives can be supported)
$1,610
$1,275.00

Notes:
- This is an PCIe type controller which takes up a PCIe slot
- This controller supports up to 16 SAS/SATA/NVMe Drives (Only 4 x4 NVMe drives can be supported; 8 x2 NVMe drives can be supported)
$1,350
$958.00

Notes:
- This is an PCIe type controller which takes up a PCIe slot
- This controller supports up to 16 SAS/SATA/NVMe Drives (Only 4 x4 NVMe drives can be supported; 8 x2 NVMe drives can be supported)
$1,850
$1,319.00
Controller Battery Cable Kits
Notes:
- The two 260mm battery cable kit can’t be selected together.
- The Extension cable kit is required for either the selection of Hybrid Capacitor or 96W Smart Storage Battery