HPE ProLiant SL250s Gen8 Parts
Unique Options
NOTE: The SFF enablement kit allows up to four SFF HDD to be implemented in place of the three GPUs.
NOTE: This SFF enablement kit will not work with the Smart Array P420 Controller (631670-B21) due to cable restrictions.
Memory
NOTE: RDIMM and UDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM.
Registered DIMMs (RDIMMs)
$52
$39.00
$55
$39.00
$98
$75.00
$75
$55.00
$60
$44.00
$69
$49.00
Unbuffered with ECC DIMMs (UDIMMs)
$98
$68.00
$89
$63.00
$104
$72.00
$101
$68.00
$91
$65.00

NOTE: For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
NOTE: There is a maximum support limitation of 8 ranks per memory channel (maximum of 2 quad rank DIMMs per channel)
NOTE: PC3L is a low voltage memory.
NOTE: Memory Min and Max depends on number of processors and type of memory:
$165
$118.00
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: The non-hot plug hard drives use a quick release carrier.
SAS Hot Plug with Smart Drive SFF (2.5-inch) Enterprise Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise 512e Drives
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
6G SATA Quick Release SFF (2.5-inch) Midline (MDL) Drives
6G SAS ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
$1,133
$776.00
$426
$304.00
6G SAS SLC Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives
3G SATA MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
$444
$302.00
$464
$329.00
SAS Non-Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives - with quick-release (QR) carrier
SATA Non-Hot Plug SFF (2.5-inch) Enterprise Mainstream - with quick-release (QR) carrier
$599
$428.00
$621
$438.00
Networking


$145
$98.00


$185
$128.00


$84
$59.00
10 Gigabit Ethernet adapters
NOTE: The SL250s Gen8 supports only the low-profile version of the 10GbE Ethernet Adapters.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.


$105
$75.00
FlexibleLOM Adapters
InfiniBand

NOTE: Dual port ConnectX-3 FDR/QDR IB or 40/10GbE. No IB Enablement Kit required.
$76
$59.00

NOTE: Dual port ConnectX-3 QDR IB or 10GbE. No IB Enablement Kit required.
$70
$49.00

NOTE: Dual port ConnectX-3 FDR/QDR IB or 40/10GbE. No IB Enablement Kit required.
$128
$95.00
Storage Controllers

SAS Controllers
Smart Array P222 Controller
Smart Array P420 Controller
Smart Array P421 Controller
Optional Upgrades
$112
$76.00

NOTE: The SFF enablement kit allows up to four SFF HDD to be implemented in place of the three GPUs.
NOTE: This SFF enablement kit will not work with the Smart Array P420 Controller
(631670-B21) due to cable restrictions.
Host Bus Adapter
$155
$112.00
$388
$266.00
Tape Backup
$4,868
$3,606.00
$3,322
$2,443.00
$2,625
$1,875.00
$1,428
$985.00
$1,980
$1,458.00
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
Entry Processors
NOTE: All Entry Processors support up to 1600MHz DDR3 memory speed.
Base Processors
NOTE: All Base Processors support up to 1333MHz DDR3 memory speed.
Performance Processors
NOTE: All support up to 1600MHz DDR3 memory speeds.
NOTE: For 130W CPU support and configuration, please contact your HPE account team.