HPE ProLiant DL180 Gen10 Parts
Maintain and optimize your HPE ProLiant DL180 Gen10 server with our full selection of compatible parts and upgrades. Designed for high-capacity storage and hybrid workloads, this 2U rack server supports Intel Xeon Scalable processors and offers flexible configuration options for expanding compute and storage capabilities.
Available DL180 Gen10 Parts:
- Memory: DDR4 ECC Registered DIMMs
- Drives: SATA, SAS, and NVMe SSDs and HDDs
- Storage Controllers: HPE Smart Array RAID and HBA cards
- Networking: 1GbE and 10GbE NICs
- Power Supplies: Redundant hot-plug PSU modules
- Processors: Intel Xeon Scalable CPUs (1st and 2nd Gen)
✅ Looking for a specific DL180 Gen10 part? Explore the subcategories below or reach out to our expert team for help.
Memory
Notes: Maximum memory capacity and speed per processor is dependent on processor model selection or limitation.
Notes: DDR4-2933 Memory Kits are only supported with 2nd Generation Intel Xeon Scalable Series Processors and DDR4-2666 Memory Kits are only supported with 1st Generation Intel Xeon Scalable Series Processors.
HPE DDR4 Memory Registered DIMMs (RDIMMs) for 2nd Generation Intel Xeon Scalable Series
$347
$248.00
$140
$100.00
$137
$98.00
$179
$128.00
Registered DIMMs (RDIMMs) for 1st Generation Intel Xeon Scalable Series
Drives
Hard Disk Drives
Mission Critical (Enterprise) - 12G SAS - SFF Drives
Business Critical (Midline) - 12G SAS - LFF Drives
Business Critical (Midline) - 6G SATA- SFF Drives
Business Critical (Midline) - 6G SATA - LFF Drives
Solid State Drives
Read Intensive - 12G SAS - SFF - Solid State Drives
$1,721
$1,229.00
$1,498
$1,159.00
Mixed Use - 12G SAS - SFF - Solid State Drives
$2,892
$2,066.00
$2,376
$1,697.00
$1,688
$1,185.00
$1,166
$833.00
Mixed Use - 12G SAS - LFF - Solid State Drives
Read Intensive - SATA - SFF - Solid State Drives
$1,544
$1,103.00
Mixed Use - SATA - SFF - Solid State Drives
$1,588
$1,219.00
Read Intensive - SATA - LFF - Solid State Drives
Internal Dual M.2 Kit
Notes: The Universal SATA M.2 Kit above will require a PCIe slot and support up to two of the same M.2 cards below.
Read Intensive - M.2 - Solid State Drives (2280 type)
Storage Controllers
Essential RAID Controllers
Notes: E208i-p and E208e-p PCIe plug-in controllers use a PCIe slot.
$245
$184.00
$333
$250.00
$255
$176.00
Notes: SFF Box3 to Smart Array E208i-a/P408i-a Cable Kit (882011-B21) is required for the installation of the controllers E208i-a or P408i-a.
Performance RAID Controller

$606
$415.00
Notes: Requires either LFF or SFF P816i-a cable kit (P36415-B21, P37221-B21).
$293
$209.00
$595
$447.00
$375
$268.00
Notes: SFF Box3 to Smart Array E208i-a/P408i-a Cable Kit (882011-B21) is required for the installation of the controllers E208i-a or P408i-a.
Smart Storage Battery

Notes: Supports up to 3 P-class Smart Array controllers.
$277
$185.00

Notes: Supports up to 6 P-class Smart Array controllers.
$145
$109.00
Networking
25 Gigabit Ethernet adapters
10 Gigabit Ethernet adapters
$223
$159.00
1 Gigabit Ethernet adapters

Notes: Max 1 per system. Can only be installed in Slot 1.
$349
$249.00
FlexibleLOM adapters
FlexibleLOM adapters
Notes: The DL180 Gen10 ships with 2x 1 Gb Embedded Network controller.
Notes: Only one FlexibleLOM can be added to the server. These options are upgradeable and can be changed from the original configuration after the server is shipped.
Notes: FlexibleLOM Enablement Kit (866941-B21) is required to install these adapters.
Notes: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
Notes: Please see the related NIC QuickSpecs for Technical Specifications and additional information: https://www.hpe.com/us/en/product-catalog/servers/adapters/pip.models.hpe-storefabric-convergednetwork-adapters.4118472.html
Power Supplies
HPE Flex Slot Power Supplies
$284
$197.00
Storage Options
Emulex Fibre Channel HBAs
$1,545
$1,058.00