Sign In or Register
Sales & Support: 1-877-418-3246
0 ITEMS | $0.00 View Cart
 

HP ProLiant SL250s Gen8 Parts

Unique Options
NOTE: The SFF enablement kit allows up to four SFF HDD to be implemented in place of the three GPUs.
NOTE: This SFF enablement kit will not work with the Smart Array P420 Controller (631670-B21) due to cable restrictions.
Back to top
Processors
Entry Processors 
NOTE: All Entry Processors support up to 1600MHz DDR3 memory speed.
Base Processors 
NOTE: All Base Processors support up to 1333MHz DDR3 memory speed.
Performance Processors 
NOTE: All support up to 1600MHz DDR3 memory speeds.
NOTE: For 130W CPU support and configuration, please contact your HP account team.
Back to top
Memory
NOTE: HP memory from previous generation servers are not qualified or warranted with this HP ProLiant Server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality for Gen8. For additional information, please see the HP SmartMemory QuickSpecs at:
NOTE: RDIMM and UDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM.
Registered DIMMs (RDIMMs) 
Unbuffered with ECC DIMMs (UDIMMs)
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory Kit
NOTE: For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: 
NOTE: There is a maximum support limitation of 8 ranks per memory channel (maximum of 2 quad rank DIMMs per channel) 
NOTE: PC3L is a low voltage memory.
NOTE: Memory Min and Max depends on number of processors and type of memory:
$303.00 $235.00
Back to top
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: The non-hot plug hard drives use a quick release carrier.
SAS Hot Plug with Smart Drive SFF (2.5-inch) Enterprise Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise 512e Drives
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline Hard Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: 
$349.00 $328.00
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
6G SATA Quick Release SFF (2.5-inch) Midline (MDL) Drives
HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) Quick Release Midline Hard Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: 
$390.00 $289.00
6G SAS ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives 
6G SAS SLC Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives
3G SATA MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
HP 100GB 3G SATA MLC SFF (2.5-inch) SC Enterprise Mainstream Solid State Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: 
$795.00 $629.00
SAS Non-Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives - with quick-release (QR) carrier
SATA Non-Hot Plug SFF (2.5-inch) Enterprise Mainstream - with quick-release (QR) carrier
Back to top
Networking
10 Gigabit Ethernet adapters
NOTE: The SL250s Gen8 supports only the low-profile version of the 10GbE Ethernet Adapters. 
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
FlexibleLOM Adapters
HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: 
$777.00 $699.00
Back to top
InfiniBand
HP InfiniBand FDR/EN 10/40Gb Dual Port 544FLR-QSFP Adapter
NOTE: Dual port ConnectX-3 FDR/QDR IB or 40/10GbE. No IB Enablement Kit required.
$1,498.00 $1,348.00
HP InfiniBand QDR/EN 10Gb Dual Port 544FLR-QSFP Adapter
NOTE: Dual port ConnectX-3 QDR IB or 10GbE. No IB Enablement Kit required.
$332.00 $246.00
HP InfiniBand FDR/EN 10/40Gb Dual Port 544QSFP Adapter
NOTE: Dual port ConnectX-3 FDR/QDR IB or 40/10GbE. No IB Enablement Kit required.
NOTE: Please see the QuickSpecs for additional information:
$826.00 $612.00
Back to top
Storage Controllers
SAS Controllers
Smart Array P222 Controller
Smart Array P420 Controller
Smart Array P421 Controller
Optional Upgrades
HP SL250 SFF Internal Enablement Kit
NOTE: The SFF enablement kit allows up to four SFF HDD to be implemented in place of the three GPUs. 
NOTE: This SFF enablement kit will not work with the Smart Array P420 Controller 
(631670-B21) due to cable restrictions.
Out of stock
HP SAS License Key No Media 1 Single Server License for B320i
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: 
(Smart Array P222 Controller)
(Smart Array P420 Controller)
(Smart Array P421 Controller)
(Smart Array Advanced Pack)
$279.00 $199.00
Host Bus Adapter
HP H222 Host Bus Adapter 
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
(HBA 220) 
(HBA 222)
$390.00 $289.00
Back to top
Tape Backup
NOTE: For the complete range of tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape. For hardware and software compatibility of HP tape backup products see: https://h20272.www2.hp.com/spock/
Back to top

Last updated: 8/24/2015

Need help finding the correct part? Live Chat operators are standing by. LET US HELP