HPE ProLiant DL360 Gen11 Drives

Upgrade your HPE ProLiant DL360 Gen11 server with genuine hot-plug drives. This dense 1U platform supports 2.5-inch (SFF), 3.5-inch (LFF), and EDSFF (E3.S) drives across SAS, SATA, and NVMe interfaces — and every drive we sell is guaranteed compatible with your DL360 Gen11.

DL360 Gen11 Drive Specifications

• Form factors & bays: 2.5-inch SFF (up to 10 hot-plug bays), 3.5-inch LFF (4 bays), and E3.S EDSFF NVMe (up to 20 bays), depending on the chassis.
• Interfaces & types: SAS (24G, backward-compatible to 12G), SATA (6G), and NVMe (U.3 and E3.S, PCIe Gen5) — available as both hard drives (HDD) and solid-state drives (SSD).
• Capacities: SSDs from 240GB up to 15.36TB; HDDs up to 2.4TB (SFF) or 26TB (LFF).
• Carriers: HPE Gen11 SFF Basic Carrier (BC) for SAS/SATA/U.3 NVMe, LFF carrier for SAS/SATA, and EDSFF carrier for E3.S NVMe.
• Boot & RAID: optional NS204i-u boot device (two M.2 NVMe SSDs in RAID 1), embedded Intel® VROC, and HPE MR-series Smart Array / TriMode controllers.

Before you order, match the drive to your chassis and backplane. The DL360 Gen11 ships in SFF, LFF, and EDSFF chassis with different backplanes, so confirm three things: the form factor (2.5-inch SFF, 3.5-inch LFF, or E3.S EDSFF), the interface your backplane supports (SAS, SATA, or NVMe), and the correct Gen11 carrier. TriMode (U.3) backplanes accept SAS, SATA, or NVMe in the same bay, but the 4-bay LFF chassis is SAS/SATA only and does not support NVMe.

Drive Form Factors, Interfaces & Carriers

The DL360 Gen11 supports three storage form factors in a 1U chassis. SFF (2.5-inch) is the most flexible, starting at 8 front bays and expanding to 10 with the optional rear 2-bay cage, and accepts SAS, SATA, or U.3 NVMe on a TriMode backplane. LFF (3.5-inch) provides 4 bays for high-capacity SAS/SATA HDDs (NVMe is not supported in the LFF chassis). EDSFF (E3.S) is an all-NVMe option scaling to 20 PCIe Gen5 drives for maximum flash density in 1U.

On TriMode (U.3) backplanes, a single bay can take a SAS, SATA, or NVMe drive, giving you room to mix media as needs change. SFF drives use HPE's Gen11 Basic Carrier (BC) — distinct from the Smart Carrier used on Gen10 and Gen10 Plus servers — so confirm your drives ship in the correct Gen11 carrier for proper fit, hot-plug operation, and status-LED function. For the full drive cage, backplane, and capacity matrix, see the official HPE QuickSpecs:

HPE ProLiant DL360 Gen11 QuickSpecs (PDF)

DL360 Gen11 Drive FAQ

What drives are compatible with the HPE DL360 Gen11?
Hot-plug SAS, SATA, and NVMe drives in 2.5-inch SFF, 3.5-inch LFF, or E3.S EDSFF form factors, as both HDDs and SSDs. The drive's form factor and interface must match your installed chassis and backplane, and SFF drives should use the Gen11 Basic Carrier.

How many drives does the DL360 Gen11 support?
Up to 10 SFF (2.5-inch) drives (8 front plus an optional 2-bay rear cage), 4 LFF (3.5-inch) drives, or up to 20 E3.S EDSFF NVMe drives, depending on the chassis.

Does the DL360 Gen11 support NVMe SSDs?
Yes. It supports U.3 NVMe in 2.5-inch bays (on TriMode/U.3 backplanes) and up to 20 E3.S EDSFF NVMe drives, both running over PCIe Gen5. The 4-bay LFF chassis is SAS/SATA only and does not accept NVMe.

What carrier do DL360 Gen11 drives use?
2.5-inch drives use HPE's Gen11 Basic Carrier (BC), which differs from the Smart Carrier used on Gen10 and Gen10 Plus servers. Be sure any drive you buy ships in the correct Gen11 carrier so it seats properly and reports drive status correctly.

✅ Need help finding the right DL360 Gen11 drive? Browse our full selection above, or contact our HPE specialists for a guaranteed-compatible recommendation.

Why Global One?

• Trusted by thousands. Over 36,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
• HPE is our specialty! We only sell genuine HP Enterprise parts.
• EASY ordering process. Purchase online now with credit card or PayPal!
• FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.