HPE ProLiant DL360 Gen11 Memory

HPE ProLiant DL360 Gen11 Memory

HPE ProLiant DL360 Gen11 Memory

Upgrade your HPE ProLiant DL360 Gen11 with genuine HPE DDR5 Smart Memory, in stock new and refurbished and tested before shipping. With 16 DIMM slots per processor, this 1U platform carries 2U-class memory capacity.

DL360 Gen11 Memory Specifications

  • Memory type: DDR5 EC8 Registered (RDIMM) — LRDIMM, UDIMM, and non-ECC modules are not supported
  • Slots: 32 DIMM slots — 16 per processor, 8 channels per CPU, 2 DIMMs per channel
  • Speeds: up to 4800 MT/s with 4th Gen Intel Xeon and up to 5600 MT/s with 5th Gen — the CPU sets the ceiling
  • Capacities: 16GB through 256GB 3DS modules, offered in DDR5-4800 and DDR5-5600 speed grades
  • Maximum capacity: 8TB — 32 × 256GB (all processors support up to 4TB per socket)

Before you order, match your memory to your CPU. The DL360 Gen11 runs DDR5-4800 with 4th Gen Xeon and DDR5-5600 with 5th Gen — and because the server clocks all memory to the slowest module installed, one wrong-grade module caps the entire server.

How much memory can the DL360 Gen11 hold?

ConfigurationTotal capacityNotes
8 × 32GB (2 CPUs)256GBEntry build, one bank per processor
16 × 64GB (2 CPUs)1TBFull speed at 1 DIMM per channel
32 × 64GB (2 CPUs, all slots)2TBSlots full — 2DPC speed step-down applies
32 × 128GB (2 CPUs, all slots)4TBLarge virtualization builds
32 × 256GB 3DS (2 CPUs, all slots)8TBPlatform maximum

The 64GB kit is the sweet spot — full-speed dual-rank modules at the best cost per gigabyte. The server clocks all memory to the slowest module installed.

Choosing the Right DL360 Gen11 Memory

Complete Your DL360 Gen11 Build

Pair memory with DL360 Gen11 processors, drives, storage controllers, networking adapters, and power supplies, or start from the full DL360 Gen11 parts page. Neighboring generations: DL360 Gen10 memory and DL360 Gen12 memory. You can also browse all Gen11 server memory or parts by server model.

DL360 Gen11 Memory FAQ

How much RAM does the HPE ProLiant DL360 Gen11 support?
Up to 8TB - 256GB 3DS RDIMMs in all 32 slots with two processors installed. Every supported processor allows up to 4TB per socket; with one CPU, 16 slots are available.

What type of memory does the DL360 Gen11 use?
DDR5 EC8 Registered DIMMs (RDIMMs) in 16GB through 256GB capacities, at 4800 MT/s (4th Gen CPUs) or 5600 MT/s (5th Gen). LRDIMM, UDIMM, non-ECC, and DDR4 are not supported.

Should I buy DDR5-4800 or DDR5-5600 memory for the DL360 Gen11?
Match the speed grade to your CPU generation - DDR5-4800 for 4th Gen Intel Xeon, DDR5-5600 for 5th Gen. Both physically fit, but the server runs every module at the slowest applicable speed, so the wrong grade wastes performance or money.

Can I use DL380 Gen11 memory in the DL360 Gen11?
Generally yes - both platforms use the same HPE DDR5 EC8 RDIMM families with matching part numbers. Always match the exact HPE part number and your CPU generation's speed grade.

Do DL360 Gen11 DIMMs need to be installed in matched sets?
Yes, in practice. Install even quantities, keep both processors' populations identical, and use the same capacity and rank within a bank - unbalanced layouts cost bandwidth.

Looking for a specific DL360 Gen11 memory module? Browse our full selection below.

Parts Finder Narrow to your model…
Compare Selected