HPE ProLiant DL360 Gen11 Networking Adapters
Genuine HPE network adapters for the HPE ProLiant DL360 Gen11, new and refurbished. The platform has no embedded networking — it provides two OCP 3.0 slots (the second enabled by a second processor) plus PCIe 5.0 slots for stand-up adapters.
DL360 Gen11 Networking Specifications
- Form factors: two OCP 3.0 slots (x16, slot 2 requires the second CPU) and PCIe 5.0 stand-up cards
- Speeds: 1GbE BASE-T through 10GbE BASE-T/SFP+, 10/25GbE SFP28, and 100GbE
- Silicon: HPE-qualified Broadcom, Intel, and Mellanox (NVIDIA) adapters, most in both PCIe and OCP3 versions
OCP slot 2 needs the second CPU. The DL360 Gen11 has no embedded networking, and only OCP slot 1 is active on single-processor configurations — plan your NIC layout around the CPU count.
Which network adapter fits the DL360 Gen11?
| Speed | Media | Form factors |
|---|---|---|
| 1GbE | RJ-45 BASE-T | OCP 3.0 or PCIe |
| 10GbE | BASE-T or SFP+ | OCP 3.0 or PCIe |
| 10/25GbE | SFP28 | OCP 3.0 or PCIe |
| 100GbE | QSFP | OCP 3.0 or PCIe |
Choosing the Right DL360 Gen11 Network Adapter
- Use the OCP slots first — in 1U, PCIe slots are scarce and better saved for storage controllers or special cards. Remember OCP slot 2 needs the second processor.
- Match the media to your fabric: BASE-T for existing copper; SFP28/QSFP with DACs or optics ordered separately.
- 25GbE is the practical default for new builds — SFP28 negotiates down to 10GbE during fabric transitions.
Complete Your DL360 Gen11 Build
Finish the platform with DL360 Gen11 memory, drives, storage controllers, processors, and power supplies, or browse the full DL360 Gen11 parts page. Neighboring generations: DL360 Gen10 adapters. Catalog-wide: HPE parts by server model.
DL360 Gen11 Networking Adapters FAQ
Does the HPE ProLiant DL360 Gen11 have built-in Ethernet ports?
No - the QuickSpecs state 'no embedded networking' aside from the dedicated iLO management port. Networking comes from the two OCP 3.0 slots and PCIe adapters.
Why doesn't my second OCP slot work in the DL360 Gen11?
OCP 3.0 slot 2 requires the second processor - on single-CPU configurations only slot 1 is active. Add the second CPU (matched to the first) to enable it.
What is the difference between OCP and PCIe network adapters?
The same networking silicon in two mounting formats. OCP 3.0 adapters slide into dedicated slots and keep the 1U chassis's scarce PCIe slots free; PCIe stand-up cards use riser slots.
Do SFP28 and QSFP adapters include transceivers?
No - the part number covers the card only. Order DAC cables or optics matched to your switch separately; BASE-T adapters connect with standard copper patch cables.
Can I mix Broadcom, Intel, and Mellanox adapters in one server?
Yes - all are HPE-qualified for the DL360 Gen11 and coexist cleanly. A common build pairs an OCP adapter for general traffic with a second card for storage or low-latency networks.
✅ Looking for a specific DL360 Gen11 network adapter? Browse our full selection below.
Browse all models
Why Global One?
- Trusted by thousands. Over 36,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 4pm ET the same day and offers NEXT DAY delivery to US customers.
