Global One Technology is open normal hours and is not experiencing any fulfillment delays during the COVID-19 pandemic.
 

HP ProLiant SL165s G7 Parts

Unique Options
HP Input/Output x16 SL165s G7/SL160s G6 Riser Kit
NOTE: This kit is required for any option going in the external PCI slot.
HP SL160s G6/SL165s G7 X4 PCI-E Riser Kit
NOTE: This kit is required for any option going in the internal PCI slot.
HP SL160s G6/SL165s G7 Small Form Factor 2 Drive Cage Kit
NOTE: This kit is required for each of the first 4 SFF (2.5") hard drives or SSDs. For SFF drives numbered 5 - 8, it is not required.
HP s6500 Full Tray Node Blank Kit
NOTE: Node blank is needed when removing full width tray for service.
NOTE: Node blank is needed when not completely filling s6500 chassis.
NOTE: 1 node blank kit is needed for every 1U full width space left in chassis.
HP s6500 Redundant Fan Kit
NOTE: It is required that the entire chassis be filled with fans - Part number only contains 1 fan, 8 must be purchased.
$92.00 $65.00
HP s6500 Non Redundant Fan Kit
NOTE: It is required that the entire chassis be filled with fans - Part number only contains 1 fan, 8 must be purchased.
$82.00 $62.00
Back to top
Memory
Registered DIMMs (RDIMMs)
Unbuffered with ECC DIMMs (UDIMMs)
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:www.hp.com/go/ddr3memory-configurator.
$243.00 $219.00
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: http://h18004.www1.hp.com/products/servers/platforms/energyefficient/
NOTE: There is a maximum support limitation of 8 ranks per memory channel (maximum of 2 quad rank DIMMs per channel)
NOTE: PC3L is a low voltage memory.
Back to top
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: The hard drives use a quick release carrier.
NOTE: SAS and SATA HDDs cannot be mixed in the same platform. SAS and SSD can be mixed and SATA and SSD can be mixed.
NOTE: The HP 2 Drive SFF Cage SL160sG6/165sG7 Kit (635914-B21) is required for each of the first 4 SFF (2.5") hard drives or SSDs. For SFF drives numbered 5 - 8, it is not required.
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives - with quick-release (QR) carrier
SAS Non-Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives - with quick-release (QR) carrier
SAS Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives - with quick-release (QR) carrier
SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives - with quick-release (QR) carrier
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives - with quick-release (QR) carrier
SATA Non-Hot Plug SFF (2.5-inch) Midline (MDL) Drives - with quick-release (QR) carrier
SATA Non-Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives - with quick-release (QR) carrier
Back to top
Networking
Gigabit Ethernet Adapters
10 Gigabit Ethernet Adapters
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
HP NC552SFP 10Gb 2-port Ethernet Server Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:www.hp.com/go/ProLiantNICs
$98.00 $75.00
Back to top
InfiniBand
QLogic InfiniBand 4X QDR PCI-E G2 Dual Port HCA
NOTE: Please see the QuickSpecs for additional information:http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04155383
$338.00 $275.00
Back to top
I/O Expansion Options
HP Input/Output x16 SL165s G7/SL160s G6 Riser Kit
NOTE: This kit is required for any option going in the external PCI slot.
HP SL160s G6/SL165s G7 X4 PCI-E Riser Kit
NOTE: This kit is required for any option going in the internal PCI slot.
Back to top
Power Supplies
NOTE: Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor
Back to top
Drive Cage Options
HP SL160s G6/SL165s G7 Small Form Factor 2 Drive Cage Kit
NOTE: The HP 2 Drive SFF Cage SL160sG6/165sG7 Kit is required for each of the first 4 SFF (2.5") hard drives or SSDs. For SFF drives numbered 5 - 8, it is not required.
Back to top
Storage Controllers
SAS Controllers
Smart Array P212 Controller
NOTE: HP PCIe x16 SL160sG6/165sG7 Riser Kit (632893-B21) is required when using the P212 controller. The P212 is always configured in the external PCIe x16 slot.
Smart Array P410 Controller
NOTE: HP PCIe x4 SL160sG6/165sG7 Riser Kit (636237-B21) is required when using the P410 controller. The P410 is always configured in the internal PCIe x4 slot.
Smart Array P411 Controller
NOTE: HP PCIe x16 SL160sG6/165sG7 Riser Kit (632893-B21) is required when using the P411 controller. The P411 is always configured in the external PCIe x16 slot.
Optional Upgrades
HP 256MB P-series Cache Upgrade
NOTE: Supported on HP Smart Array P212 Controller only.
$46.00 $35.00
HP 512MB P-Series Battery Backed Write Cache Upgrade
NOTE: Supported on HP Smart Array P410 Controller and HP Smart Array P411 Controller only.
$188.00 $149.00
HP 650 mAh P-Series Battery
NOTE: To enable BBWC on the 256MB cache.
$201.00 $148.00
NOTE: Supported on HP Smart Array P212 Controller, HP Smart Array P410 Controller, and HP Smart Array P411 Controller only.
HP 1GB Flash Backed Cache
NOTE: Please see the following QuickSpecs for Technical Specifications and additional information: 
(Smart Array P212 Controller)
(Smart Array P410 Controller)
(Smart Array P411 Controller)
$64.00 $45.00
SCSI HBA
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter
NOTE: Please see the following QuickSpecs for Technical Specifications and additional information:
(SC11Xe Host Bus Adapter)
$180.00 $135.00
Back to top
Storage Options
Fibre Channel HBA
NOTE: For the complete listing of Fibre Channel Host Bus Adapters for Windows 2000, Windows Server 2003 and Linux, please see: http://h18006.www1.hp.com/storage/saninfrastructure/hba.html
Brocade Fibre Channel HBAs
Emulex Fibre Channel HBAs
QLogic Fibre Channel HBAs
SCSI HBA
HP U320e SCSI Dual Channel Host Bus Adapter
NOTE: Recommended HBA for MSL SCSI Tape Library connect.
$330.00 $248.00
Converged Network Adapter
Back to top
Disk Storage Systems
Disk Enclosures
$2,219.00 $1,850.00
HP D2700 Disk Enclosure
NOTE: Please see the QuickSpecs for additional options and configuration information at:
$785.00 $655.00
Back to top

Last updated: 7/15/2020

Need help finding the correct part? Live Chat operators are standing by. LET US HELP