Sign In or Register
Sales & Support: 1-877-418-3246
0 ITEMS | $0.00 View Cart
 

HP ProLiant SL230s Gen8 Parts

Processors
Entry Processors 
NOTE: All support up to 1066MHz memory speeds.
Base Processors 
NOTE: All support up to1333MHz DDR3 memory speeds.
Performance Processors 
NOTE: All support up to 1600MHz DDR3 memory speeds.
NOTE: For 130W CPU support and configuration, please contact your HP account team. 
HP SL230s Gen8 Intel Xeon® E5-2637 (3.0GHz/2-core/5MB/80W) Processor Kit
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
Out of stock
Back to top
Memory
NOTE: HP memory from previous generation servers are not qualified or warranted with this HP ProLiant Server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen8. For additional information, please see the HP SmartMemory QuickSpecs at:
NOTE: RDIMM and UDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM.
Registered DIMMs (RDIMMs) 
Unbuffered with ECC DIMMs (UDIMMs)
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory Kit
NOTE: For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: 
$308.00
NOTE: There is a maximum support limitation of 8 ranks per memory channel (maximum of 2 quad rank DIMMs per channel) 
NOTE: PC3L is a low voltage memory.
NOTE: Memory Min and Max depends on number of processors and type of memory:
Back to top
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: The non-hot plug hard drives use a quick release carrier.
SAS Hot Plug with Smart Drive SFF (2.5-inch) Enterprise Drives
SAS Hot Plug Smart Drive SFF (2.5-inch) Midline Drives
NOTE: Please see QuickSpecs for technical specifications and additional information at:
SAS Quick Release SFF (2.5-inch) Enterprise (ENT) Drives
SAS Quick Release LFF (3.5-inch) Enterprise (ENT) Drives 
SAS Quick Release LFF (3.5-inch) Midline (MDL) Drives 
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: 
6G SATA Hot Plug with Smart Drive SFF (2.5-inch) Midline (MDL) Drives 
6G SATA Quick Release SFF (2.5-inch) Midline (MDL) Drives
6G SATA Quick Release LFF (3.5-inch) Midline (MDL) Drives
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: 
6G SAS ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
6G SAS MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
6G SAS SLC Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives
3G SATA MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
$637.00 $455.00
3G SATA MLC Quick Release SFF (2.5-inch) Enterprise Mainstream Solid State Drives
NOTE: The hard drive options are not required when configuring a Drive-less Model.
Drive Cage Kits
HP SL230 2X Small Form Factor (SFF) Hot Plug Hard Drive Cage Kit
NOTE: The Front Hot Plug cage kit, enables two hot plug drives to be implemented in the front bezel. Drives can be implemented individually in order to support a FlexibleLOM or riser card option in the opposite slot.
$184.00 $166.00
HP SL230 Large Form Factor (LFF) Quick Release Hard Drive Cage Kit
NOTE: The LFF kit enables two (2) 3.5" QR drives.
$243.00 $219.00
HP SL230 Small Form Factor (SFF) Quick Release Hard Drive Cage Kit
NOTE: The SFF kit enables up to four (4) 2.5" QR drives.
$209.00 $188.00
Back to top
Networking
Gigabit Ethernet Adapters
10 Gigabit Ethernet adapters
NOTE: The SL230s Gen8 supports only the low-profile version of the 10GbE Ethernet Adapters. 
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
FlexibleLOM Adapters
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs
Back to top
InfiniBand
HP InfiniBand FDR/EN 10/40Gb Dual Port 544FLR-QSFP Adapter
NOTE: Dual port ConnectX-3 FDR/QDR IB or 40/10GbE. No IB Enablement Kit required.
$1,498.00 $1,348.00
HP InfiniBand QDR/EN 10Gb Dual Port 544FLR-QSFP Adapter
NOTE: Dual port ConnectX-3 QDR IB or 10GbE. No IB Enablement Kit required.
$499.00 $475.00
HP InfiniBand FDR/EN 10/40Gb Dual Port 544QSFP Adapter
NOTE: Dual port ConnectX-3 FDR/QDR IB or 40/10GbE. No IB Enablement Kit required.
$1,611.00 $1,450.00
NOTE: Please see the QuickSpecs for additional information:
Back to top
Storage Controllers
SAS Controllers
Smart Array P222 Controller
Smart Array P421 Controller
Optional Upgrades
NOTE: Due to cabling requirements, the HP 12in Super Cap is a required option to implement a HP Smart Array Controller with Flash.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: 
Host Bus Adapter 
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: 
Back to top

Last updated: 4/29/2015

Need help finding the correct part? Live Chat operators are standing by. LET US HELP
Accepted Credit Cards