HPE ProLiant DL180 Gen9 Networking Adapters

The DL180 Gen9 takes network adapters in a FlexibleLOM slot on an optional riser and in up to six PCIe 3.0 slots on two risers, of which slots 4 to 6 need the second processor. Two embedded 1GbE RJ-45 ports (the HPE Ethernet 1Gb 2-Port 361i Adapter) on every model. HPE's QuickSpecs have listed 15 network adapters (Ethernet and InfiniBand) for it across editions.

  • 15 adapters
  • 1GbE to 10GbE
  • New and refurbished
  • Tested or factory sealed

From the HPE ProLiant DL180 Generation9 (Gen9) QuickSpecs (c04346227, version 27, 25-September-2017), which HPE has retired.

Slot map

Where each adapter goes in a DL180 Gen9

FlexibleLOM
One FlexibleLOM slot, slot 3 of the optional riser with FlexibleLOM, for 1GbE, 10GbE or QDR/FDR InfiniBand FlexibleLOM adapters pp. 3, 5, 7
Built-in ports
2 x 1GbE (361i, all models) pp. 3, 5, 7, 49
Primary riser
Slots 1–3 (riser kit 725569-B21): PCIe 3.0 x8, x8, x8. On processor 1. + 2 other risers HPE lists for this position pp. 2–3, 5, 15, 28
Secondary riser
Slots 4–6 (riser kit 725569-B21): PCIe 3.0 x8, x8, x8. Needs processor 2. + 1 other riser HPE lists for this position pp. 2–3, 5, 15, 28
HPE's words for each line
  • FlexibleLOM “Riser with Flexible | LOM” (page 5) “3 FlexibleLOM Full-height, half- Can only be used for | FlexibleLOMs” (page 5) “FlexibleLOM slot for 1GbE or 10GbE or QDR/FDR InfiniBand Networking Options” (page 7) “Flexible LOM sideband signal connector” (page 3)
  • Built-in ports “Embedded 2x1GbE NIC” (page 3) “Network Controller HPE Ethernet 1Gb 2-Port 361i Adapter” (page 5) “LOM Network Ports 2x1GbE network ports” (page 7) “Connector Two RJ-45” (page 49)
  • Primary riser “1 PCIe 3.0 x8 x8 Full-height, full- | length slot” (page 5) “2 PCIe 3.0 x8 x8 Full-height, half-” (page 5) “3 PCIe 3.0 x8 x8 Full-height, half-” (page 5) “NOTE: This riser can be used with both CPU 1 and CPU 2.” (page 5) “HP DL180 Gen9 3 Slot x8 PCI-E Riser Kit 725569-B21” (page 28) “PCIe3 slots 1-3 (primary, associated with processor 1) | PCIe3 slots 4-6 (secondary, associated with processor 2)” (page 2) “Primary PCIe riser, standard” (page 3) “3 Standard (1-FL/FH, 2-FH/HL)” (page 15)
  • Secondary riser “1 PCIe 3.0 x8 x8 Full-height, full- | length slot” (page 5) “2 PCIe 3.0 x8 x8 Full-height, half-” (page 5) “3 PCIe 3.0 x8 x8 Full-height, half-” (page 5) “NOTE: This riser can be used with both CPU 1 and CPU 2.” (page 5) “HP DL180 Gen9 3 Slot x8 PCI-E Riser Kit 725569-B21” (page 28) “PCIe3 slots 1-3 (primary, associated with processor 1) | PCIe3 slots 4-6 (secondary, associated with processor 2)” (page 2) “Primary PCIe riser, standard” (page 3) “3 Standard (1-FL/FH, 2-FH/HL)” (page 15)

From the HPE ProLiant DL180 Generation9 (Gen9) QuickSpecs (c04346227, version 27, 25-September-2017).

All DL180 Gen9 network adapters

The network adapters HPE's QuickSpecs have listed for the DL180 Gen9 across editions, grouped by slot and type. In each group the adapters in stock come first, then the ones our customers order most.

FlexibleLOM or PCIe on the DL180 Gen9?

FlexibleLOMPCIe adapter
How manyOne FlexibleLOM slot, slot 3 of the optional riser with FlexibleLOM, for 1GbE, 10GbE or QDR/FDR InfiniBand FlexibleLOM adapters.Up to six PCIe 3.0 slots on two risers
What HPE has listed1GbE to 10GbE Ethernet; InfiniBand adapters1GbE to 10GbE Ethernet; InfiniBand adapters
Slot rulesOnly one FlexibleLOM fits the server, and it can be changed after the server ships.Slots 4 to 6 need the second processor.
How to tell from the nameFLR in the name, e.g. 561FLR-TNo FLR, e.g. 561T

How to choose a DL180 Gen9 network adapter

Rule 1

Decide the FlexibleLOM first

Only one FlexibleLOM fits the server, and it can be changed after the server ships.

HPE: “Only one FlexibleLOM can be added to the server. These options are upgradeable and can be changed from the original configuration after the server is shipped.” (page 19)

Rule 2

Match the cabling to the switch

HPE notes that DAC cables or fiber transceivers and cables are bought separately.

HPE: “NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.” (page 27)

Rule 3

Count the processors

Slots 4 to 6 need the second processor.

HPE: “NOTE: This riser can be used with both CPU 1 and CPU 2.” (page 5)

Rule 4

Plan the server memory

10Gb adapters, FlexibleLOM and stand-up, need at least 2 GB of server memory per adapter.

HPE: “For 10Gb adapters, a minimum of two Gigabytes (2 GB) of server memory is required per each adapter.” (page 19)

DL180 Gen9 adapter questions

How many network adapters can a DL180 Gen9 take?

The DL180 Gen9 takes network adapters in a FlexibleLOM slot on an optional riser and in up to six PCIe 3.0 slots on two risers, of which slots 4 to 6 need the second processor. Two or three PCIe 3.0 slots per riser depending on the kit (three with the 3 Slot x8 riser, two with the x16 riser or the riser with FlexibleLOM), up to six with two 3-slot risers and a second processor. Only one FlexibleLOM fits the server, and it can be changed after the server ships.

Does the DL180 Gen9 have network ports built in?

Two embedded 1GbE RJ-45 ports (the HPE Ethernet 1Gb 2-Port 361i Adapter) on every model. The pre-configured Entry, Base and Storage models (833970-B21 to 833974-B21) ship with three full-height PCIe slots (one full-length, two half-length); the CTO chassis (754525-B21, 754524-B21, 754523-B21, 775506-B21) have 3 PCIe slots plus 3 more with a second processor; all have the embedded 2-port adapter.

Will an OCP 3.0 adapter fit a DL180 Gen9?

HPE's QuickSpecs for the DL180 Gen9 give it one FlexibleLOM slot: “3 FlexibleLOM Full-height, half- Can only be used for | FlexibleLOMs” (page 5). The list HPE gives for it has FlexibleLOM adapters for that slot and no OCP 3.0 adapters.

Are cables or transceivers included?

HPE notes that DAC cables or fiber transceivers and cables are bought separately. HPE: “NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.” (page 27).

Do I need the second processor for more adapters?

Slots 4 to 6 need the second processor. Slots 1 to 3 run from processor 1. HPE: “NOTE: This riser can be used with both CPU 1 and CPU 2.” (page 5).

What do “QuickSpecs version 27” and “earlier HPE edition” mean on the list?

An adapter tagged “Listed in QuickSpecs version 27” is in version 27 of HPE's QuickSpecs for the DL180 Gen9, the edition this page is built from. One tagged “Listed in an earlier HPE edition” was listed for this server in an earlier edition of HPE's QuickSpecs and is not in version 27.

What if the adapter I need is out of stock?

Out of stock today does not mean unavailable: we can often source this part. Add it to a quote request and we reply with current pricing and availability. Every message, quotes included, is answered within 24 hours.

Most ordered for the DL180 Gen9

The adapters on this page our customers order most, for any server. Each card shows only while the store has it in stock.

FlexibleLOM adapters

5 adapters

One FlexibleLOM slot, slot 3 of the optional riser with FlexibleLOM, for 1GbE, 10GbE or QDR/FDR InfiniBand FlexibleLOM adapters.

PCIe Ethernet adapters

7 adapters

Stand-up cards for the PCIe slots.

InfiniBand and Omni-Path adapters

3 adapters

Under HPE InfiniBand, HPE lists the InfiniBand FDR/Ethernet 544+QSFP adapter and the FDR and QDR 544+FLR-QSFP FlexibleLOMs, and refers to the HPE InfiniBand Options QuickSpecs for more.

Ships same dayMost orders ship the same business day
1-year warrantyReplacement coverage on every part
5,000+ five-star reviewsShopper Approved, BBB A+ rating
Ships to 120+ countriesBy UPS; duties are collected by the carrier

Equipping several servers?

Send your list as one quote request. Every message, quotes included, is answered within 24 hours.