HPE ProLiant BL490c G7 Parts
Ethernet Mezzanine Options
Gigabit Ethernet Mezzanines
NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on 2 of the 4 ports.
$76
$56.00
NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on only 2 of the 4 ports.
$81
$60.00
$204
$146.00
NOTE: The Gigabit Ethernet adapters above transmit from the server at 2000 Mbps, full duplex per port only. For more information, see the "Network Controller" segment in the Standards Features section.
10 Gigabit Ethernet Mezzanines
NOTE: The NC522m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HPE BladeSystem c7000 Enclosure) or bays 3-4 (HPE BladeSystem c3000 Enclosure).
NOTE: The NC522m requires a minimum of 2 GB of server memory.
NOTE: The NC522m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 enabled module and will link with all current 1Gb switches at 1Gb.
$197
$138.00
NOTE: The NC532m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HPE BladeSystem c7000 Enclosure) or bays 2-4 (HPE BladeSystem c3000 Enclosure).
NOTE: The NC532m requires a minimum of 2 GB of server memory.
NOTE: The NC532m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 enabled module and will link with all current 1Gb switches at 1Gb.
$146
$98.00
NOTE: The NC542m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HPE BladeSystem c7000 Enclosure) or bays 3-4 (HPE BladeSystem c3000 Enclosure).
NOTE: The NC542m requires a minimum of 2 GB of server memory.
NOTE: The NC542m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The NC542m will only support 1000Mbps when connected to a 1Gb Ethernet interconnect.
$64
$49.00
NOTE: The NC550m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HPE BladeSystem c7000 Enclosure) or bays 2-4 (HPE BladeSystem c3000 Enclosure).
NOTE: The NC550m requires a minimum of 2 GB of server memory.
NOTE: The NC550m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The NC550m will only support 1000Mbps when connected to a 1Gb Ethernet interconnect.
$320
$218.00
NOTE: The NC552m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HPE BladeSystem c7000 Enclosure) or bays 2-4 (HPE BladeSystem c3000 Enclosure).
NOTE: The NC552m requires a minimum of 2 GB of server memory.
NOTE: The NC552m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The NC552m will only support 1000Mbps when connected to a 1Gb Ethernet interconnect.
$92
$64.00
NOTE: The ROM Based Setup Utility (RBSU) feature allows for the configuring of a FlexFabric Adapter to any of the supported protocols. For example iSCSI to FCoE (Fibre Channel over Ethernet). Note that a HPE Virtual Connect profile takes precedence over the setting in this menu. Also, some FlexFabric Adapters may require that network boot be enabled in order to configure the protocol. If the protocol is configured without enabling network boot with certain FlexFabric Adapters, the protocol may not take effect. Once the protocol has taken effect on the first boot after configuring this option, network boot may be disabled if desired.
Fibre Channel Mezzanine Options
Memory
Registered DIMMs (RDIMMs)
$49
$38.00
$54
$38.00
$50
$39.00
$81
$65.00
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
$56
$39.00
$56
$39.00
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
Unbuffered with ECC (UDIMMs)
$57
$38.00
$66
$45.00
$67
$48.00
NOTE: PC3L is a low voltage memory.
Drives
SATA Non-Hot Plug Midline Solid State Drives (SSD)
Storage Controllers
HPE Smart Array P700m Controller
HPE Smart Array P712m Controller
NOTE: Provides RAID support on internal non-hot plug SSDs.
$81
$65.00
Optional Upgrades
NOTE: Supports HPE Smart Array P700m Controller.
$86
$68.00
NOTE: Supports HPE Smart Array P712m Controller.
$174
$132.00
NOTE: Supports HPE Smart Array P712m Controller.
$41
$29.00
I/O Expansion Options
c-Class Mezzanine Options
Ultrium Tape Blades
NOTE: LTO-4 Ultrium tape technology.
$3,987
$3,588.00
NOTE: LTO-3 Ultrium technology.
$2,772
$2,495.00
StorageWorks SB40c Storage Blade
$495
$385.00
Expansion Blade
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one PCIe connect board which requires installation.
$359
$246.00
Processors
| NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
Six-Core Processors
Four-Core Processors
NOTE: When upgrading or ordering spares for CPU 1, reuse the heatsink that was originally shipped with CPU 1 and ensure sufficient thermal grease is applied.
Why Global One?
- Trusted by thousands. Over 32,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.
