HPE ProLiant BL460c Gen9 Processors
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
E5-2600 v3 series Processors
CHF 482
CHF 282.81
CHF 275
CHF 161.26
CHF 102
CHF 71.50
CHF 74
CHF 51.64
CHF 74
CHF 51.64
CHF 604
CHF 354.30
CHF 76
CHF 53.22
CHF 68
CHF 47.66
CHF 69
CHF 48.46
CHF 238
CHF 139.81
CHF 4,787
CHF 3,395.27
CHF 604
CHF 354.30
CHF 77
CHF 54.02
CHF 421
CHF 247.06
CHF 177
CHF 123.93
CHF 2,017
CHF 1,183.66
CHF 453
CHF 320.94

NOTE: DIMM slots 4 and 5 are not accessible when either the E5-2699 v3, the E5-2697 v3, the E5-2643 v3, the E5-2637 v3, or the E5-2667 v3 is used. In a 2 processor configuration, there are twelve (12) total available DIMM slots.
CHF 1,384
CHF 811.88
NOTE: For the maximum supported memory speeds for each processor listed above, please reference the 'Memory Speed by Processor Model' table in the Memory section of the QuickSpecs.
NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency when using Intel Turbo Boost Technology. The frequency boost increment is dependent on the processor SKU and the number of active cores. In general, a higher boost increment is obtained when fewer cores are active.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: Supports 1 or 2 processors. Mixing different processor models is not supported.
NOTE: For the Intel C610 Chipset E5-2600 v3 Series, the letter preceding the model number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6 is socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs.
NOTE: The BL460c Gen9 includes two I/O mezzanine expansion slots. A processor must be installed in processor slot 1 for access to the first mezzanine expansion slot (expansion slot 1). A processor must be installed in processor slot 2 for access to the second mezzanine expansion slot (expansion slot 2).
NOTE: All processors within the server must be identical.
NOTE: All processors support Intel Hyper-Threading and Intel Turbo Boost Technologies except the E5-2603 v3 and E5-2609 v3.
NOTE: The letter L following the model number indicates denotes lower wattage.
NOTE: The processor model as well as the memory configuration determines the maximum speed memory can operate. Please see the see the Memory section later in this document.