Sign In or Register
Sales & Support: 1-877-418-3246
0 ITEMS | $0.00 View Cart
 

HP ProLiant SL390s G7 Parts

Unique Options
HP IB Enablement Kit
NOTE: Needed to enable Infiniband using QSFP port on system board.
$289.00 $259.00
HP SL390s 2U SAS Enablement Kit
NOTE: needed if use SAS drives instead of SATA drives.
HP SL390s NHP SATA Cable Kit
NOTE: This is needed when using internal non hot plug drive in 2U tray.
HP SL390s SFF Enablement Kit
NOTE: required for every 2 SFF drives being added to the 1U tray.
HP 2x170 P212 SAS 2 Hard Drive Power Cable Kit
NOTE: this is required when add two 3.5" SAS drive to the 1U tray.
HP z6000 P212 SAS 4 Hard Drive Power Cable Kit
NOTE: this is required when add four 3.5" SAS drive to the 1U tray.
HP SL390 2 GPU Riser Kit
NOTE: riser need when adding 2 GPUs to 2U tray.
$588.00 $529.00
HP SL390 Single GPU Riser Kit
NOTE: needed when adding 1 GPU to 2U tray.
NOTE: also needed if adding 3rdd GPU to 2U tray.
$306.00 $275.00
HP s6500 Redundant Fan Kit
NOTE: It is required that the entire chassis be filled with fans - Part number only contains 1 fan, 8 must be purchased.
$111.00 $82.00
HP s6500 Non-Redundant Fan Kit
NOTE: It is required that the entire chassis be filled with fans - Part number only contains 1 fan, 8 must be purchased.
$124.00 $92.00
HP s6500 Half Width Service Tray Kit
NOTE: service tray needed when removing ½ width tray for service.
$1,721.00 $1,549.00
HP s6500 node blank Kit
NOTE: Node blank is needed when not completely filling s6500 chassis.
NOTE: 1 node blank is needed for every 1U half width space left in chassis.
Back to top
Processors
Six-Core Processors
Quad-Core Processors
Dual-Core Processors
NOTE: 130 watt processors are only available on 1U half width tray in s6500 chassis with non-redundant fans.
NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 Series, the letter preceding the model number indicates the performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.
Back to top
Memory
Registered DIMMs (RDIMMs)
NOTE: Low Voltage DIMMs can only be used with Intel Xeon processor 5600 series processors.
NOTE: Low Voltage DIMMs can only be used with Intel Xeon processor 5600 series processors.
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: There is a maximum support limitation of 8 ranks per memory channel (maximum of 2 quad rank DIMMs per channel)
NOTE: PC3L is a low voltage memory.
NOTE: Memory Min and Max depends on number of processors and type of memory:
1. Processor -> R-Dimm: Min 1 // Max 6 U-Dimm: Min 1 // Max 12
2. Processors -> R-Dimm: Min 2 // Max 6 U-Dimm: Min 2 // Max 12
Back to top
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: The non-hot plug hard drives use a quick release carrier.
NOTE: Hot plug hard drives are for 2U tray only.
NOTE: non hot plug with quick release carrier are used in 1U tray and internal to the 2U tray.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G 10K Drives
6G 15K Drives
6G 10K Drives
3G 15K Drives
3G 10K Drives
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
SATA Hot Plug 2.5" SFF Entry (ETY) Drives
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SATA Hot Plug 2.5" Midline (MDL) Solid State Drives
RECOMMENDATION: For best performance of SSD drives it is recommended that any Smart Array Controller use a max of 4 drives. For this product a second Smart Array option can be used for the second set of 4 SSD drives.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SAS Non-Hot Plug Enterprise (ENT) Drives - with quick-release (QR) carrier
SATA Non-Hot Plug Entry (ETY) Drives - with quick-release (QR) carrier
SATA Non-Hot Plug Midline (MDL) Drives - with quick-release (QR) carrier
NOTE: HP P212 SAS 4HDD Cable Kit (574001-B21) is needed when adding more than two 2.5" hard drives.
SATA Non-Hot Plug Midline (MDL) Solid State Drives - with quick-release (QR) carrier
NOTE: The non-hot plug hard drives use a quick release carrier.
NOTE: One 2 Drive SFF Drive Cage (582657-B21) is required when installing 2 SFFF drives.
NOTE: When Adding SAS one of the following cable kits needs to be ordered depending on which SAS controller installing - HP P212 SAS 4HDD Cable Kit 574001-B21 or HP P410 SAS 4HDD Cable Kit 583997-B21.
NOTE: Hot plug hard drives are for 2U tray only.
NOTE: non hot plug with quick release carrier are used in 1U tray and internal to the 2U tray.
Back to top
Networking
Gigabit Ethernet Adapters
10 Gigabit Ethernet adapters
NOTE: The SL390s G7 supports only the low-profile version of the 10GbE Ethernet Adapters.
NOTE: No more than two 10GbE I/O devices are supported in a single ProLiant server.
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs
Back to top
InfiniBand
NOTE: Please see the QuickSpecs for additional information: http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04155383
Back to top
I/O Expansion Options
Back to top
Power Supplies
CAUTION: In ProLiant Servers that have more than one power slot (bay), only same size power supplies are recommended. If non-matched power supplies are inserted you will get errors and operation will fail.
Back to top
Storage Controllers
SAS Controllers
Smart Array P212 Controller
Smart Array P410 Controller
Smart Array P411 Controller
Optional Upgrades
HP 650 mAh P-Series Battery
NOTE: To enable BBWC on the 256MB cache.
$104.00 $81.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SCSI HBA
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter
NOTE: Recommended HBA for SCSI tape drive connect.
$299.00 $219.00
NOTE: Please see the QuickSpecs for additional information:
Back to top

Last updated: 8/4/2015

Need help finding the correct part? Live Chat operators are standing by. LET US HELP