HP ProLiant DL380 G6 Parts
Processors
Quad-Core Processors
$305.00 $246.00
$141.00 $114.00
$193.00 $156.00
$131.00 $106.00
$193.00 $156.00
$114.00 $92.00
$95.00 $77.00
$179.00 $128.00
Dual-Core Processors
Memory
RESOURCE: HP/HPE Server Memory Configurator
The HP ProLiant DL380 G6 (Generation 6) server comes standard with 4GB of Unbuffered memory and can support up to 192GB of Registered memory (RDIMM), or up to 48GB of Unbuffered memory (UDIMM). Please note that Registered and Unbuffered memory cannot be mixed in the same server.
These maximum configurations are achieved by populating 12 slots with 16GB RDIMMs or 4GB UDIMMs. Global One Technology offers the 192GB RDIMM kit to max out the memory on your DL380 G6 server. The complete list of DL380 G6 memory options is shown below. See page 40 of this document for more information. Feel free to contact us via Live Chat with with questions.
Registered DIMMs (RDIMMs)
$67.00 $54.00
$69.00 $56.00
$104.00 $84.00
$87.00 $70.00
$93.00 $75.00
$107.00 $86.00
Unbuffered with ECC DIMMs (UDIMMs)
$69.00 $50.00
$140.00 $113.00
$175.00 $158.00
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see:
Optical Drives
Drives
NOTE: This server model can be configured to use either 2.5 inch Small Form Factor (SFF) drives OR 3.5 inch Large Form Factor drives. Please be sure to verify which type your machine is configured to use before placing an order. If you are unsure about which type you need, please visit the section #1 – Does my machine use 2.5 inch SFF or 3.5 inch LFF drives? in our blog post here for help making this decision.The SFF models have four slots per vertical column with a max of 16 total hard drive slots), while the LFF models have two slots per column.
You can use either SAS or SATA drives in the DL380 G6. Most customers opt for Enterprise SAS drives due to the superior performance - faster data transfer rates and spindle speeds. See the full list of available drives below. Feel free to contact us via Live Chat with with questions about hard drives for DL380G6 servers.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives
6G 15K Drives
3G 15K Drives
3G 10K Drives
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
SAS Hot Plug 3.5" Midline (MDL) Drives
HP 750GB 3G SAS 7.2K rpm LFF 3.5" Dual Port Midline Hard Drive
461135-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
SATA Hot Plug 3.5" Midline (MDL) Drives
SATA Hot Plug 3.5" Entry (ETY) Drives
SATA Hot Plug 2.5" SFF Entry (ETY) Drives
SATA Hot Plug Midline (MDL) Solid State Drives
SATA Hot Plug 3.5" Midline (MDL) Solid State Drives
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
Networking
HP NC364T PCI Express Quad Port Gigabit Server Adapter
NOTE: Does not support Windows 2000.
$99.00 $80.00
HP NC522SFP Dual Port 10GbE Server Adapter
NOTE: A minimum of two gigabyte (2 GB) of server memory is required per each NC522SFP adapter.
$99.00 $80.00
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs
Riser Cage Options
Power Supplies
CAUTION: In ProLiant Servers that have more than one power slot (bay), only same size power supplies are recommended. If non-matched power supplies are inserted you will get errors and operation will fail.
HP 1200W-48V DC Common Slot Power Supply
NOTE: DC power supplies contain a -48V DC power cord designed for in rack DC power rectifiers.
$1,200.00 $975.00
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
Drive Cage Options
HP 8SFF CAGE 380G6
NOTE: Second drive cage installation replaces internal optical bay.
NOTE: Second drive cage requires second controller or HP SAS Expander Card (468406-B21).
$94.00 $76.00
Storage Controllers
SAS Controllers
Smart Array P800 Controller
Smart Array P212 Controller
Smart Array P410 Controller
Smart Array P411 Controller
Optional Upgrades
Battery Kit upgrade
NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HP P410i Smart Array (integrated), HP Smart Array P212 Controller, HP Smart Array P410 Controller, and HP Smart Array P411 Controller only.
$94.00 $76.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
(Smart Array P800 Controller)
(Smart Array P212 Controller)
(Smart Array P410 Controller)
(Smart Array P411 Controller)
SAS Controller Options
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
(SAS Expander Card)
SAS HBA
HP SC08Ge Host Bus Adapter
NOTE: For use with additional 8 SFF drive cage (516914-B21).
$99.00 $80.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SCSI HBA
NOTE: Please see the QuickSpecs for additional information:
Last updated: 9/6/2018
Need help finding the correct part? Live Chat operators are standing by. LET US HELP
