Sign In or Register
Sales & Support: 1-877-418-3246
0 ITEMS | $0.00 View Cart
 

HP ProLiant BL490c G7 Parts

Ethernet Mezzanine Options
Gigabit Ethernet Mezzanines
HP NC325m PCI Express Quad Port Gigabit Server Adapter
NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on 2 of the 4 ports.
$101.00 $78.00
HP NC364m Quad Port 1GbE BL-c Adapter
NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on only 2 of the 4 ports.
NOTE: The Gigabit Ethernet adapters above transmit from the server at 2000 Mbps, full duplex per port only. For more information, see the "Network Controller" segment in the Standards Features section.
10 Gigabit Ethernet Mezzanines
HP NC522m Dual Port 10GbE Multifunction BL-c Adapter
NOTE: The NC522m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure).
NOTE: The NC522m requires a minimum of 2 GB of server memory.
NOTE: The NC522m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 enabled module and will link with all current 1Gb switches at 1Gb.
$375.00 $319.00
HP NC532m Dual Port 10GbE BL-c Adapter
NOTE: The NC532m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 2-4 (HP BladeSystem c3000 Enclosure).
NOTE: The NC532m requires a minimum of 2 GB of server memory.
NOTE: The NC532m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 enabled module and will link with all current 1Gb switches at 1Gb.
$244.00 $219.00
HP NC542m Dual Port Flex-10 10GbE Multifunction BL-c Adapter
NOTE: The NC542m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure).
NOTE: The NC542m requires a minimum of 2 GB of server memory.
NOTE: The NC542m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The NC542m will only support 1000Mbps when connected to a 1Gb Ethernet interconnect.
$225.00
HP NC550m 10GbE 2-port PCIe x8 Flex-10 Ethernet Adapter
NOTE: The NC550m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 2-4 (HP BladeSystem c3000 Enclosure).
NOTE: The NC550m requires a minimum of 2 GB of server memory.
NOTE: The NC550m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The NC550m will only support 1000Mbps when connected to a 1Gb Ethernet interconnect.
$488.00 $388.00
HP BLc NC552m Flex-10GbE Dual Port Adapter
NOTE: The NC552m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 2-4 (HP BladeSystem c3000 Enclosure).
NOTE: The NC552m requires a minimum of 2 GB of server memory.
NOTE: The NC552m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The NC552m will only support 1000Mbps when connected to a 1Gb Ethernet interconnect.
$832.00 $749.00
NOTE: The ROM Based Setup Utility (RBSU) feature allows for the configuring of a FlexFabric Adapter to any of the supported protocols. For example iSCSI to FCoE (Fibre Channel over Ethernet). Note that a HP Virtual Connect profile takes precedence over the setting in this menu. Also, some FlexFabric Adapters may require that network boot be enabled in order to configure the protocol. If the protocol is configured without enabling network boot with certain FlexFabric Adapters, the protocol may not take effect. Once the protocol has taken effect on the first boot after configuring this option, network boot may be disabled if desired.
Back to top
Processors
Six-Core Processors
Four-Core Processors
NOTE: When upgrading or ordering spares for CPU 1, reuse the heatsink that was originally shipped with CPU 1 and ensure sufficient thermal grease is applied.
Back to top
Memory
Registered DIMMs (RDIMMs)
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
Unbuffered with ECC (UDIMMs)
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: http://h18004.www1.hp.com/products/servers/platforms/energyefficient/
NOTE: PC3L is a low voltage memory.
Back to top
Storage Controllers
HP Smart Array P700m Controller
NOTE: Please see the QuickSpecs for Technical Specifications and additional configuration information at:
HP Smart Array P712m Controller
HP Smart Array P712m/ZM 2-ports Int PCIe x8 SAS Controller
NOTE: Provides RAID support on internal non-hot plug SSDs.
$199.00 $159.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional configuration information at:
Optional Upgrades
HP Smart Array P-Series Low Profile Battery
NOTE: Supports HP Smart Array P700m Controller.
$199.00 $138.00
HP 650 mAh P-series Low Profile Battery
NOTE: Supports HP Smart Array P712m Controller.
$188.00 $166.00
HP 256MB P-series Cache Upgrade
NOTE: Supports HP Smart Array P712m Controller.
$67.00 $48.00
Back to top
I/O Expansion Options
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04128314
Back to top
c-Class Mezzanine Options
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04135582
Back to top
Ultrium Tape Blades
HP StorageWorks SB1760c Tape Blade
NOTE: LTO-4 Ultrium tape technology.
$3,987.00 $3,588.00
HP StorageWorks SB920c Tape Blade
NOTE: LTO-3 Ultrium technology.
$2,772.00 $2,495.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04154444
Back to top
StorageWorks SB40c Storage Blade
NOTE: Please see the QuickSpecs for Technical Specifications and additional configuration information at:
Back to top
Expansion Blade
HP BLc PCI Expansion Blade
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one PCIe connect board which requires installation.
$887.00 $698.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional configuration information: http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04128342
Back to top

Last updated: 7/20/2015

Need help finding the correct part? Live Chat operators are standing by. LET US HELP