Global One Technology is open normal hours and is not experiencing any fulfillment delays during the COVID-19 pandemic.
 

HP ProLiant BL460c Gen9 Parts

Networking
NOTE: A 10 Gigabit Ethernet adapter supports linking at 1Gbps or 10Gbps when connected to an interconnect module with 10Gb Ethernet downlinks. 
NOTE: A 10 Gigabit Ethernet adapter supports linking at only 1Gbps when connected to an interconnect module with 1Gb Ethernet downlinks. 
NOTE: The 10 Gigabit Ethernet adapters on each server blade connect to a 10Gb interconnect in bays 3-6 (HP BladeSystem c7000 Enclosure) or bays 2-4 (HP BladeSystem c3000 Enclosure).
20 Gigabit Ethernet Mezzanine Cards
HP FlexFabric 20Gb 2-port 630M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04312720
$693.00 $495.00
HP FlexFabric 20Gb 2-port 650M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04347342
$1,321.00 $950.00
10 Gigabit Ethernet Mezzanine Cards
HP FlexFabric 10Gb 2-port 534M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at:http://h18000.www1.hp.com/products/quickspecs/14619_na/14619_na.html
$795.00 $599.00
HP Ethernet 10Gb 2-port 560M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at:http://h18000.www1.hp.com/products/quickspecs/14478_na/14478_na.html.
$482.00 $349.00
HP Ethernet 10Gb 2-port 570M Adapter
NOTE:Onlysupported in Legacy BIOS mode.
$2,650.00
NOTE: Please see QuickSpecs for technical specifications and additional information at http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04227607
1 Gigabit Ethernet Mezzanine Cards
HP Ethernet 1Gb 4-port 366M Adapter 
NOTE: Please see QuickSpecs for technical specifications and additional information at:http://h18000.www1.hp.com/products/quickspecs/14335_na/14335_na.html
$448.00 $361.00
FlexibleLOM Adapters
NOTE: The server supports one (1) FlexibleLOM that is installed in the FlexibleLOM connectors and is already included in the pre-configured models. However, it must be added in Step 2 for Configure-to-Order Models. The FlexibleLOM options below are used to change these original FlexibleLOMs. 
20Gb FlexibleLOM Adapters
HP FlexFabric 20Gb 2-port 630FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04312719
$237.00 $188.00
HP FlexFabric 20Gb 2-port 650FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04347341
$161.00 $124.00
10Gb FlexibleLOM Adapters
HP FlexFabric 10Gb 2-port 536FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04347246
$116.00 $81.00
HP Ethernet 10Gb 2-port 560FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111193
$108.00 $85.00
HP Ethernet 10Gb 2-port 570FLB Adapter
NOTE:Onlysupported in Legacy BIOS mode.
$1,750.00
NOTE: Please see QuickSpecs for technical specifications and additional information  at http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04312718
HP Infiniband Mezzanine Adapters
NOTE: When an InfiniBand adapter is installed in mezzanine slot 1, only one port is active (regardless of operating mode). When installed in mezzanine slot 2, both ports are active. 
NOTE: InfiniBand QDR and FDR speeds are only supported on the HP BladeSystem c7000 Enclosure. For additional information, please see the HP BladeSystem c7000 Enclosure and InfiniBand QuickSpecs at:http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04135582
HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter
NOTE: The QDR InfiniBand adapter may be installed in either mezzanine slot of the server.
HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter
NOTE: The FDR InfiniBand adapter must be installed in mezzanine slot 1 for FDR mode and may be installed in either mezzanine slot if operated in any other mode.
Back to top
Fibre Channel
HP LPe1605 16Gb Fibre Channel HBA for BladeSystem c-Class
NOTE: Please see QuickSpecs for technical specifications and additional information at http://h18000.www1.hp.com/products/quickspecs/14742_na/14742_na.html
$549.00 $413.00
HP QMH2672 16Gb Fibre Channel Host Bus Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04126962
$348.00 $276.00
Back to top
Processors
E5-2600 v3 series Processors
HP BL460c Gen9 Intel® Xeon® E5-2699v3 (2.3GHz/18-core/45MB/145W) Processor Kit
NOTE: DIMM slots 4 and 5 are not accessible when either the E5-2699 v3, the E5-2697 v3, the E5-2643 v3, the E5-2637 v3, or the E5-2667 v3 is used. In a 2 processor configuration, there are twelve (12) total available DIMM slots.
$1,662.00 $1,233.00
NOTE: For the maximum supported memory speeds for each processor listed above, please reference the 'Memory Speed by Processor Model' table in the Memory section of the QuickSpecs.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency when using Intel® Turbo Boost Technology.  The frequency boost increment is dependent on the processor SKU and the number of active cores.  In general, a higher boost increment is obtained when fewer cores are active.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: Supports 1 or 2 processors. Mixing different processor models is not supported.
NOTE: For the Intel® C610 Chipset E5-2600 v3 Series, the letter preceding the model number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6 is socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs.
NOTE: The BL460c Gen9 includes two I/O mezzanine expansion slots. A processor must be installed in processor slot 1 for access to the first mezzanine expansion slot (expansion slot 1). A processor must be installed in processor slot 2 for access to the second mezzanine expansion slot (expansion slot 2). 
NOTE: All processors within the server must be identical.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost Technologies except the E5-2603 v3 and E5-2609 v3.
NOTE: The letter "L" following the model number indicates denotes lower wattage.
NOTE: The processor model as well as the memory configuration determines the maximum speed memory can operate. Please see the see the "Memory" section later in this document.
Back to top
Memory
NOTE: HP memory from previous generation servers (DDR3) is not compatible with this server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen9. For additional information, please see the HP SmartMemory QuickSpecs at: https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04111535 
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a server. 
NOTE: Depending on the memory configuration and processor model, the memory speed may run at 2133MHz, 1866MHz, or 1600MHz. Please see Memory Population Table or the Online Memory Configuration Tool at:http://h22195.www2.hp.com/MemoryTool/Home/Legal
HP SmartMemory
Registered DIMMs (RDIMMs) - E5-2600 v3 series Processors
Load Reduced DIMMs (LRDIMMs) - E5-2600 v3 series Processors
HP 48GB (1x16GB +1x32GB) DDR4-2133 CAS-15-15-15 Load Reduced Memory FIO Kit
NOTE: Depending on the memory configuration and processor model, 2133MHz memory may operate at a lower speed. Please see the the Online Memory Configuration Tool for details at: http://h22195.www2.hp.com/MemoryTool/Home/Legal . 
$1,259.00 $999.00
Back to top
Drives
NOTE: The ProLiant BL460c Gen9 server includes the HP hot-plug small form factor (SFF) SmartDrive carrier for enhanced management and reduced maintenance errors. HP drives from generation G7 servers and before are not compatible with the BL460c Gen9 drive bays.
NOTE: The mixing of standard SAS drives with SAS SSD is supported within the server, but limits the RAID configuration to two separate RAID 0 volumes. Mixing of other drives types is not supported.
Solid State M.2 SATA Drives
6G SATA LE Hot Plug SFF (2.5-inch) SC EL G1 Solid State Drives
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline Hard Drive
NOTE: Please see the QuickSpecs for technical specifications and additional information at
$111.00 $77.00
SAS Hot Plug with Smart Drive SFF (2.5-inch) Enterprise Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise 512e Drives
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline Hard Drive
NOTE: Please see QuickSpecs for technical specifications and additional information at
$221.00 $148.00
12G SAS High Endurance Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives
12G SAS Mainstream Endurance Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Boot Solid State Drives
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives
6G SATA ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
6G SAS VE (2.5-inch) SC EV Solid State Drives
6G SAS LE (2.5-inch) SC El Solid State Drives
6G SATA LE (2.5-inch) SC El Solid State Drives
12G SAS VE SFF (2.5-inch) SC EV Solid State Drives
SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
HP 600GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise Hard Drive
NOTE: The mixing of standard SAS drives with SAS SSD is supported within the server, but limits the RAID configuration to two separate RAID 0 volumes. Mixing of other drives types is not supported 
$410.00 $295.00
NOTE: Please see the QuickSpecs for technical specifications and information at
Back to top
InfiniBand Mezzanines
NOTE: When an InfiniBand adapter is installed in mezzanine slot 1, only one port is active (regardless of operating mode). When installed in any other mezzanine slot, both ports are active. 
NOTE: InfiniBand QDR and FDR speeds are only supported on the HP BladeSystem c7000 Enclosure. For additional information, please see the HP BladeSystem c7000 Enclosure and InfiniBand QuickSpecs at:http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04135582
HP Infiniband QDR/Ethernet 10Gb 2-port 544M Adapter
NOTE: The QDR InfiniBand adapter may be installed in any mezzanine slot of the server.
$112.00 $84.00
HP Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544M Adapter
NOTE: The FDR InfiniBand adapter must be installed in mezzanine slot 1 for FDR mode and may be installed in any mezzanine slot if operated in any other mode.
$93.00 $65.00
Back to top

Last updated: 10/1/2020

Need help finding the correct part? Live Chat operators are standing by. LET US HELP