HPE ProLiant DL980 G7 Parts
Unique Options

NOTE: Adds four PCI-E 2.0 x8, one PCI-E 2.0 x4 and one PCI-E 1.1 x4.
$206
$145.00

NOTE: Adds two PCI-E 2.0 x16, one PCI-E 2.0 x4 and two PCI-X.
$1,267
$850.00

NOTE: Adds four PCI-E 2.0 x8, one PCI-E 2.0 x4.
Memory
Registered DIMMs (RDIMMs)
$49
$38.00
$50
$39.00
$56
$39.00
$67
$48.00

NOTE: Eight memory boards come standard in all pre-configured and CTO models. A maximum of 16 memory boards are supported in the server (requires installation of the HPE DL980 CPU Assembly P/N: AM442A).
$77
$62.00
Optical Media
$100
$75.00
$54
$39.00
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
Networking
Gigabit Ethernet Adapters
$81
$59.00

NOTE: There is a maximum of five NC364T PCI Express Quad Port Gigabit Server Adapter NICs allowed in this server.
$165
$125.00
$111
$79.00
10 Gigabit Ethernet Adapters
NOTE: No more than two 10GbE I/O devices are supported in a single ProLiant server.
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
Smart-mini DIMM Module

NOTE: By plugging the Smart-mini DIMM Module to the HPE NC375i Integrated Quad Port Multifunction Gigabit Server Adapter, TCP/IP Offload Engine (TOE) for Windows is enabled/supported.
$335
$265.00
InfiniBand
$609
$450.00
I/O Expansion Options

NOTE: Adds four PCI-E 2.0 x8, one PCI-E 2.0 x4 and one PCI-E 1.1 x4.
$1,267
$850.00

NOTE: Adds two PCI-E 2.0 x16, one PCI-E 2.0 x4 and two PCI-X.
$206
$145.00

NOTE: Adds four PCI-E 2.0 x8, one PCI-E 2.0 x4.
Power Supplies
Storage Controllers
SAS Controllers
Smart Array P212 Controller
Smart Array P411 Controller
Smart Array P812 Controller
Optional Upgrades
NOTE: Maximum of two battery or FBWC kits (for Smart Array Controllers) can be installed in upper full height/full length (FH/FL) I/O slot area. Maximum of one battery or FBWC kit (for Smart Array Controller) can be installed in lower low profile (LP) I/O slot area.

NOTE: Supported on HPE Smart Array P212 Controller and HPE Smart Array P411 Controller only.
$207
$156.00
$53
$39.00
$67
$48.00
SAS HBA

NOTE: This is a 2 x4 External Port HBA
NOTE: This is only approved for the HPE StorageWorks P2000 G3 SAS Modular Smart Array.
$157
$109.00
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
NOTE: Each processor kit contains four processors. 8P configurations require one HPE DL980 CPU Assembly (P/N: AM442A)