HPE ProLiant DL325 Gen10 Plus Power Supplies
Genuine HPE Flex Slot power supplies for the HPE ProLiant DL325 Gen10 Plus, new and refurbished. The platform runs one or two hot-plug PSUs — two matching supplies give full 1+1 redundancy with tool-less replacement.
DL325 Gen10 Plus Power Supply Specifications
- Family: HPE Flex Slot hot-plug, tool-less modules shared across the ProLiant Gen10 Plus line
- AC options: 500W Platinum (865408-B21), 800W Platinum (865414-B21), 800W Titanium (865438-B21) and 1600W Platinum (830272-B21)
- Specialty options: 800W Universal at 277VAC (865428-B21) and 800W -48VDC (865434-B21)
- Efficiency: up to 94% on the Platinum, Universal and DC units; up to 96% on the 800W Titanium
- Quantity: one or two per chassis — two identical supplies provide 1+1 redundancy
- Rules: mixing two different power supplies is not allowed, and the 800W Titanium and 1600W Platinum units are 200–240VAC only
Buy the part number you already have. The DL325 Gen10 Plus takes one or two Flex Slot supplies, and the QuickSpecs states that mixing two different power supplies is not allowed. Check the feed as well: the 800W Titanium and 1600W Platinum units are 200–240VAC only.
How many power supplies does the DL325 Gen10 Plus need?
| Configuration | PSUs | Typical choice |
|---|---|---|
| Light build: 4LFF or 8SFF, low-wattage CPU | 2 (1+1 redundant) | 500W Platinum |
| General-purpose 8SFF or 16SFF build | 2 (1+1 redundant) | 800W Platinum or Titanium |
| Loaded: 24 bays, 240W processor, GPU | 2 (1+1 redundant) | 1600W Platinum |
Production systems should run two supplies — hot-plug Flex Slot modules then let you replace a failed unit without downtime. Rated line voltage is 100–120VAC or 200–240VAC per supply, and HPE Power Advisor sizes the exact build.
Choosing the Right DL325 Gen10 Plus Power Supply
- Never mix wattages or models — the QuickSpecs is explicit that mixing two different power supplies is not supported. When adding redundancy, buy the part number already installed.
- Check your feed first: the 500W and 800W Platinum units accept 100–120VAC or 200–240VAC, while the 800W Titanium and the 1600W Platinum require high-line 200–240VAC.
- Titanium buys efficiency, not headroom — 865438-B21 is the same 800W output at up to 96% instead of 94%.
- Refurbished PSUs are a low-risk buy — sealed, tested modules, and the usual way to add a second supply affordably.
Complete Your DL325 Gen10 Plus Build
Pair redundant power with the rest of the platform: DL325 Gen10 Plus memory, drives, storage controllers, networking adapters, processors, or the full DL325 Gen10 Plus parts page. Neighboring options: DL325 Gen10 Plus v2 power supplies and DL385 Gen10 Plus power supplies. Catalog-wide: HPE parts by server model.
DL325 Gen10 Plus Power Supplies FAQ
What power supplies does the HPE ProLiant DL325 Gen10 Plus use?
HPE Flex Slot hot-plug modules: 500W Platinum, 800W Platinum, 800W Titanium, and 1600W Platinum, plus an 800W Universal 277VAC unit and an 800W -48VDC unit. The server takes one or two.
Can I mix different power supplies in the DL325 Gen10 Plus?
No. The QuickSpecs states that mixing two different power supplies is not allowed and that all power supplies in a server should match. Buy the exact part number already installed when adding the second unit.
Does the 1600W power supply work on 110V power?
No. The 1600W Flex Slot Platinum unit only supports high line voltage, 200-240VAC. On a 100-120VAC feed, use the 500W or 800W Platinum options.
What is the difference between the 800W Platinum and 800W Titanium units?
Efficiency and input range. Both deliver 800W: the Platinum unit reaches up to 94% efficiency and accepts 100-120VAC or 200-240VAC, while the Titanium unit reaches up to 96% but is 200-240VAC only.
Can I hot-swap a failed DL325 Gen10 Plus power supply?
Yes, provided two supplies are installed for 1+1 redundancy. Flex Slot modules are hot plug and tool-less, so the failed unit pulls out and the replacement slides in without shutting the server down.
Are DL325 Gen10 Plus and DL385 Gen10 Plus power supplies the same?
Both platforms draw on the HPE Flex Slot family and several wattages overlap, but the supported list differs by platform. Match the exact part number listed in your server's QuickSpecs rather than assuming a shared kit.
✅ Looking for a specific DL325 Gen10 Plus power supply? Browse our full selection below.
Browse all models
Why Global One?
- Trusted by thousands. Over 36,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 4pm ET the same day and offers NEXT DAY delivery to US customers.
