HPE ProLiant DL165 G7 Parts

HPE ProLiant DL165 G7 Parts

HPE ProLiant DL165 G7 Parts

Drives

NOTE: This server model can be configured to use either 2.5 inch Small Form Factor (SFF) drives OR 3.5 inch Large Form Factor drives. Please be sure to verify which type your machine is configured to use before placing an order. If you are unsure about which type you need, please visit the section #1 – Does my machine use 2.5 inch SFF or 3.5 inch LFF drives? in our blog post here for help making this decision.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.

SATA Hot Plug 3.5" Midline (MDL) Drives

SATA Non-Hot Plug 3.5" Midline (MDL) Drives

SATA Hot Plug 3.5" Entry (ETY) Drives

SATA Non-Hot Plug 3.5" Entry (ETY) Drives

SATA Hot Plug 2.5" Midline (MDL) Solid State Drives

SATA Hot Plug 3.5" Midline (MDL) Solid State Drives

SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives

12G 15K Drives

12G 10K Drives

6G 15K Drives

6G 10K Drives

3G 15K Drives

3G 10K Drives

SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives

SAS Hot Plug 3.5" Midline (MDL) Drives

Cooling Options

HPE DL165G7 Redundant Fan OPT KIT thumb
NOTE: Redundant Fan Option Kit ONLY required for fan redundancy in single processor configurations. Two processor configurations offer N+1 fan redundancy as standard.
$206
$156.00

Storage Controllers

SAS Controllers

NOTE: To utilize the internal only slot, the HPE Smart Array P410 Controller must be selected. The selection of the HPE Smart Array P212 Controller for internal and external connectivity, will require the use of the Full Length Full Height PCI-E x16 slot.
NOTE: With the HPE Smart Array P410 Controller, the addition of the battery backed cache upgrade enables BBWC, RAID 5, 5+0, array expansion, logical drive extension, RAID migration, and stripe size migration. In order to upgrade to RAID 6, at least 256MB Cache and a Battery is required in addition to the HPE Smart Array Advanced Pack license (P/N 516471-B21).

Smart Array P212 Controller

Smart Array P410 Controller

Smart Array P411 Controller

Smart Array P812 Controller

Optional upgrades

256 MB Cache Module thumb
NOTE: Supported on HPE Smart Array P212 Controller only.
$41
$29.00
512MB BBWC thumb
NOTE: Supported on HPE Smart Array P411 Controller only.
$173
$129.00

SAS HBA

Compare Selected