Global One Technology is open normal hours and is not experiencing any fulfillment delays during the COVID-19 pandemic.
 

HP ProLiant SL335s G7 Parts

Unique Options
HP s6500 Half-width Tray Node Blank Kit
NOTE: Node blank is needed when removing half width tray for service.
Out of stock
NOTE: Node blank is needed when not completely filling s6500 chassis.
NOTE: 1 node blank kit is needed for every 1U half width space left in chassis.
HP s6500 Redundant Fan Kit
NOTE: It is required that the entire chassis be filled with fans - Part number only contains 1 fan, 8 must be purchased.
$92.00 $65.00
HP s6500 Non-Redundant Fan Kit
NOTE: It is required that the entire chassis be filled with fans - Part number only contains 1 fan, 8 must be purchased.
$82.00 $62.00
HP s6500 BBWC Mounting Kit
NOTE: This kit must be included if ordering any BBWC option for the Smart Array Controller.
HP s6500 SAS Enablement Kit 
NOTE: This kit provides the cable for connecting the Smart Array P410 Controller to the system board.
HP P212 Half Width SAS Power Cable Kit
NOTE: This kit provides the cable for connecting the Smart Array P212 Controller to the system board.
HP s6500 SFF Enablement Kit
NOTE: This kit includes the hardware that holds the stacked SFF HDDs and power cables and is required when ordering SFF HDDs. Order one kit for every two SFF HDDs.
HP SL335s 5 and 6 Small Form Factor (SFF) Hard Drive Enablement Kit
NOTE: This kit includes the cables for attaching the 5th and 6th SATA SFF HDDs. This kit is not needed if only attaching up to 4 SATA SFF HDDs.
Back to top
Memory
Registered DIMMs (RDIMMs)
Unbuffered with ECC DIMMs (UDIMMs)
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:www.hp.com/go/ddr3memory-configurator.
$243.00 $219.00
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: http://h18004.www1.hp.com/products/servers/platforms/energyefficient/
NOTE: There is a maximum support limitation of 8 ranks per memory channel (maximum of 1 quad rank DIMM and 2 dual rank DIMMs per channel)
NOTE: PC3L is a low voltage memory.
Back to top
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: To support HP hard drives exceeding 2.2TB, a HP Smart Array Controller is required.
NOTE: The non-hot plug hard drives use a quick release carrier.
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives - with quick-release (QR) carrier
SAS Non-Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives - with quick-release (QR) carrier
NOTE: the HP s6500 SFF Enablement Kit (607247-B21) must be ordered when ordering SFF HDDs. This kit includes the hardware which holds two SFF HDDs and includes the power cable for the drives. Order one kit for every 2 SFF HDDs.
SAS Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives - with quick-release (QR) carrier
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives - with quick-release (QR) carrier
SATA Non-Hot Plug SFF (2.5-inch) Midline (MDL) Drives - with quick-release (QR) carrier
NOTE: the HP s6500 SFF Enablement Kit (607247-B21) must be ordered when ordering SFF HDDs. This kit includes the hardware which holds two SFF HDDs and includes the power cable for the drives. Order one kit for every 2 SFF HDDs.
SATA Non-Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives - with quick-release (QR) carrier
Back to top
Power Supplies
NOTE: Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor
HP 1200W Common Slot Platinum Hot Plug Power Supply Kit
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
$127.00 $85.00
Back to top
Storage Controllers
NOTE: To support HP hard drives exceeding 2.2TB, HP Smart Array Firmware version 5.0 or later is required for the P212 and P410 controllers.
SAS Controllers
Smart Array P212 Controller
NOTE: The HP SAS/PWR Cable P212 Half Width Kit (658608-B21) is required when using the P212 controller.
Smart Array P410 Controller
NOTE: The HP s6500 SAS Enablement Kit (610682-B21) is required when using the P410 Controller.
Optional Upgrades
HP 512MB P-Series Battery Backed Write Cache Upgrade
NOTE: Supported on HP Smart Array P410 Controller only.
$188.00 $149.00
HP 1GB Flash Backed Cache
NOTE: Please see the following QuickSpecs for Technical Specifications and additional information: 
(Smart Array P212 Controller)
(Smart Array P410 Controller)
$64.00 $45.00
Back to top

Last updated: 7/15/2020

Need help finding the correct part? Live Chat operators are standing by. LET US HELP