Sign In or Register
Now shipping to over 100 countries worldwide!
0 ITEMS | $0.00 View Cart
 

HP ProLiant SL165z G7 Parts

Unique Options
HP ProLiant z6000 Tray blank kit
NOTE: This is needed to help with cooling if a tray is removed from the z6000.
HP ProLiant z6000 Cable Management Kit
NOTE: This is needed when using Fiber cables.
1U Filler Panel Blank Mounting Bracket
NOTE: This is needed to mount the 1U blanking panel back with server when the server is recessed mounted.
HP P212 SAS 4HDD Cable Kit
NOTE: This is required when adding SAS hard drives using the P212 controller.
HP P410 SAS 4HDD Cable Kit
NOTE: This is required when adding SAS hard drives using the P410 controller.
HP z6000 BBWC HDWR KIT
NOTE: This is required when adding BBWC.
2 Drive SFF Drive Cage
NOTE: This is required when adding SFF (2.5") SSD or hard drives.
$131.00 $118.00
Back to top
Memory
Registered DIMMs (RDIMMs)
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: http://www.hp.com/go/proliant-energy-efficient
NOTE: There is a maximum support limitation of 8 ranks per memory channel (maximum of 2 quad rank DIMMs per channel)
NOTE: PC3L is a low voltage memory.
Back to top
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: The hard drives use a quick release carrier.
NOTE: One 2 Drive SFF Drive Cage (582657-B21) is required when installing 2 SFF drives.
NOTE: When adding SAS one of the following cable kits needs to be ordered depending on which SAS controller installing - HP P212 SAS 4HDD Cable Kit 574001-B21 or HP P410 SAS 4HDD Cable Kit 583997-B21.
SAS Enterprise (ENT) Drives - with quick-release (QR) carrier
SATA Entry (ETY) Drives - with quick-release (QR) carrier
SATA Midline (MDL) Drives - with quick-release (QR) carrier
SATA Midline (MDL) Solid State Drives - with quick-release (QR) carrier
Back to top
Networking
Gigabit Ethernet Adapters
10 Gigabit Ethernet Adapters
HP NC522SFP Dual Port 10GbE Server Adapter
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
$459.00 $325.00
HP NC550SFP Dual Port 10GbE Server Adapter
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC550SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
$750.00 $675.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs
Back to top
Infiniband Options
NOTE: Please see the QuickSpecs for additional information:
Back to top
CAUTION: In ProLiant Servers that have more than one power slot (bay), only same size power supplies are recommended. If non-matched power supplies are inserted you will get errors and operation will fail.
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
Back to top
Storage Controllers
SAS Controllers
Smart Array P212 Controller
NOTE: HP P212 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P212 controller (574001-B21)
Smart Array P410 Controller
NOTE: HP P410 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P410 controller (583997-B21)
Smart Array P411 Controller
Optional Upgrades
NOTE: HP z6000 BBWC HDWR KIT is required when adding BBWC (582653-B21)
256 MB Cache Module
NOTE: Supported on HP Smart Array P212 Controller only.
$44.00 $34.00
512MB BBWC
NOTE: Supported on HP Smart Array P410 Controller and HP Smart Array P411 Controller only.
$96.00 $74.00
Battery Kit upgrade
NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HP Smart Array P212 Controller, HP Smart Array P410 Controller, and HP Smart Array P411 Controller only.
$83.00 $64.00
NOTE: Please see the following QuickSpecs for Technical Specifications and additional information:
Back to top

Last updated: 3/11/2015

Need help finding the correct part? Live Chat operators are standing by. LET US HELP
Accepted Credit Cards