Global One Blog.

// expert guides on HPE servers, storage & enterprise networking

Featured · Drives

vSAS vs SAS SSD: What HPE Value SAS Really Is

Value SAS is a real SAS drive, not SATA in disguise — but it is single-port and de-featured. Here is what HPE removed, what it kept, and when substituting it is safe. Last updated: 2026 The short answer on vSAS vs SAS SSD: Value SAS
Read guide → ▸ Aug 07, 2026
Drives

Genuine HPE Drives vs. Third-Party Drives in ProLiant Servers: Firmware, iLO, and What Actually Happens

Thinking about putting a cheaper third-party drive in your HPE ProLiant server? Here's what actually happens — to iLO, to your fans, to firmware updates, and to your support coverage — and when a non-HPE drive is (and isn't) a r
▸ Jul 02, 2026
Drives

HPE ProLiant Gen11 Drive Compatibility Guide

Which HDDs, SSDs, and NVMe drives fit your HPE ProLiant Gen11 server — including the DL360, DL380, and ML350 — plus the Basic Carrier, Low Profile Carrier, U.3, and EDSFF details that actually decide compatibility. Last updated
▸ Jun 24, 2026
Drives

Taming the Tempest: How to Fix Excessive Fan Noise in HPE ProLiant Servers

HPE ProLiant fans stuck at full speed even when the server is cool? If you've installed third-party drives, here's exactly why it happens — and the clean, supported way to fix it. Last updated: 2026 If you manage a data center, a se
▸ Apr 26, 2026
SSDs

SSD vs HDD for Enterprise Servers: Performance Guide

SSDs win decisively on speed, but HDDs still have a place in enterprise storage. Here's how they actually compare on performance, capacity, endurance, and cost — and how to deploy each in an HPE ProLiant server. Last updated: 2026 C
▸ Mar 04, 2025
SSDs

Understanding Drive Writes Per Day (DWPD) in HPE Solid State Drives

Drive Writes Per Day (DWPD) is the single most important number for matching an SSD to your workload — it tells you how much you can write to a drive, every day, before it wears out. Here's what DWPD means for HPE SSDs, and how to cho
▸ Aug 10, 2023
SSDs

Comparing Solid State Drives (SSD) and Hard Disk Drives (HDD) in HPE Server Systems

SSDs and HDDs each still have a place in HPE servers — the trick is knowing which factor matters for your workload. Here's how they compare on performance, durability, capacity, and cost, and how to choose. Last updated: 2026 The ch
▸ Jun 28, 2023
SSDs

Understanding SSDs: Single-Level Cell vs Multi-Level Cell

The type of NAND flash inside an SSD — SLC, MLC, TLC, or QLC — sets its endurance, capacity, and cost. Here's what the bits-per-cell trade-off really means, and how it maps to enterprise HPE drives. Last updated: 2026 Every so
▸ Jun 26, 2023
Drives

Understanding Spindle Speed and Choosing the Right HPE Server Hard Drive

Spindle speed — 7.2K, 10K, or 15K RPM — is one of the main things that separates HPE hard drives. Here's how it affects performance, which speed suits which workload, and the one question to ask before you even pick an RPM. Las
▸ Apr 20, 2023
Drives

Understanding Data Transfer Rate in Hard Disk Drives

A hard drive's data transfer rate is easy to misread — the big interface number (6 or 12 Gb/s) isn't the speed you'll actually get. Here's what really determines HDD throughput on an HPE server, and the sustained-vs-burst distinction
▸ Apr 19, 2023
!