HPE ProLiant DL385p Gen8 Rack Options
Rack Options
HPE Location Discovery Services
HPE TFT7600 G2 KVM Console and Monitor (TFT7600 G2)
HPE USB Keyboard and Mouse
HPE Server Console Switches
HPE Server Console Switch G2 with Virtual Media & CAC
HPE IP Console Switch G2 with Virtual Media & CAC
Rail Kits
NOTE: Rail kits are optional for Gen8 and are no longer included standard with the server(except pre-configured Models). The customer has the choice to not include rail kits with their server purchase, but it is recommended.
NOTE: HPE 2U Ball Bearing Rail Kits provide full serviceability of the server while in the Rack and include a CMA. HPE 2U Friction Rail Kits ARE NOT serviceable in the Rack and must be removed from the rack and do not include CMA.
NOTE: The HPE 1U Gen8 Cable Management Arm is not available when using Friction Rails. To assist in the installation of the server into the rack an optional installation tool is available by contacting your local services representative (p/n 695539-001). Caution: HPE recommends that a minimum of two people are required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.

NOTE: HPE 2U Ball Bearing Rail Kits provide full serviceability of the server while in the Rack and include a CMA. HPE 2U Friction Rail Kits ARE NOT serviceable in the Rack and must be removed from the rack and do not include CMA.
€241
€178.28

NOTE: HPE 2U Ball Bearing Rail Kits provide full serviceability of the server while in the Rack and include a CMA. HPE 2U Friction Rail Kits ARE NOT serviceable in the Rack and must be removed from the rack and do not include CMA.
€241
€174.70