HPE ProLiant DL380 Gen10 Power Supplies
Genuine HPE Flex Slot power supplies for the HPE ProLiant DL380 Gen10, new and refurbished. The platform runs one or two hot-plug PSUs — two matching supplies give full 1+1 redundancy with tool-less replacement, and the deep refurb market makes redundancy one of the cheapest upgrades this server takes.
DL380 Gen10 Power Supply Specifications
- Family: HPE Flex Slot hot-plug, tool-less modules
- Options: 500W Platinum, 800W Platinum, 800W Titanium, and 1600W Platinum (Low Halogen variants)
- Quantity: one or two; two matching PSUs provide 1+1 redundancy
- Rules: both installed PSUs must match; the 1600W unit requires high-line 200–240VAC
Match before you add. Both power supplies in a DL380 Gen10 must be the identical model — and the 1600W unit requires 200–240VAC high-line power.
How many power supplies does the DL380 Gen10 need?
| Configuration | PSUs | Typical choice |
|---|---|---|
| Light build: 1 CPU, few drives | 2 (1+1 redundant) | 500W |
| General-purpose 2P build | 2 (1+1 redundant) | 800W Platinum or Titanium |
| Loaded: high-TDP CPUs, full bays, GPUs | 2 (1+1 redundant) | 1600W |
Production systems should run two supplies — hot-plug modules then let you replace a failed unit without downtime. Size the exact build with HPE Power Advisor.
Choosing the Right DL380 Gen10 Power Supply
- Never mix wattages or models — both PSUs in the chassis must be identical.
- Check your feed: 500W and 800W units accept standard ranges; the 1600W unit requires 200–240VAC high-line power.
- The 800W Titanium earns its premium on 24/7 loaded systems through efficiency; the 800W Platinum is the volume choice.
- Refurbished PSUs are a low-risk buy — sealed, tested modules and the standard way to add redundancy on this platform.
Complete Your DL380 Gen10 Build
Pair redundant power with the rest of the platform: DL380 Gen10 memory, drives, storage controllers, networking adapters, processors, or the full DL380 Gen10 parts page. Neighboring generations: DL380 Gen10 Plus power supplies and DL380 Gen11 power supplies. Catalog-wide: HPE parts by server model.
DL380 Gen10 Power Supplies FAQ
What power supplies does the HPE ProLiant DL380 Gen10 use?
HPE Flex Slot hot-plug PSUs: 500W Platinum, 800W Platinum, 800W Titanium, and 1600W Platinum. The server runs one or two, always matching.
Can I mix different power supplies in the DL380 Gen10?
No - both units must be the same model and wattage. When adding redundancy, buy the exact part number already installed.
Does the 1600W power supply work on 110V power?
No - the 1600W unit requires high-line 200-240VAC. On low-line power, use the 500W or 800W options.
Can I hot-swap a failed DL380 Gen10 power supply?
Yes, provided two supplies are installed (1+1 redundancy) - pull the failed module and insert the replacement without shutting down.
Which power supply do I need for GPUs in the DL380 Gen10?
Plan around the 1600W unit for GPU and high-TDP configurations, and confirm the exact draw with HPE Power Advisor before ordering.
✅ Looking for a specific DL380 Gen10 power supply? Browse our full selection below.
Browse all models
Why Global One?
- Trusted by thousands. Over 36,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 4pm ET the same day and offers NEXT DAY delivery to US customers.
