HPE ProLiant BL685c G7 Parts
Ethernet Mezzanine Options
Gigabit Ethernet Mezzanines
CA$104
CA$76.63
CA$125
CA$98.52
CA$111
CA$82.10
CA$82
CA$57.47
10 Gigabit Ethernet Mezzanines
NOTE: The NC522m requires a minimum of 2 GB of server memory.
NOTE: The NC522m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 enabled module and will link with all current 1Gb switches at 1Gb.
CA$270
CA$188.84
NOTE: The NC532m requires a minimum of 2 GB of server memory.
NOTE: The NC532m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 enabled module and will link with all current 1Gb switches at 1Gb.
CA$200
CA$134.10
NOTE: The NC542m requires a minimum of 2 GB of server memory.
NOTE: The NC542m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The NC542m will only support 1000Mbps when connected to a 1Gb Ethernet interconnect.
CA$88
CA$67.05
NOTE: The NC550m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HPE BladeSystem c7000 Enclosure) or bays 3-4 (HPE BladeSystem c3000 Enclosure)
NOTE: The NC550m requires a minimum of 2 GB of server memory.
NOTE: The NC550m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The NC550m will only support 1000Mbps when connected to a 1Gb Ethernet interconnect.
CA$438
CA$298.31
Fibre Channel Mezzanine Options
4Gb Fibre Channel Mezzanines
8Gb Fibre Channel Mezzanines
CA$99
CA$79.37
CA$272
CA$202.52
Memory
Registered DIMMs (RDIMMs)
CA$111
CA$76.63
CA$130
CA$105.37
CA$93
CA$67.05
CA$129
CA$104.00
CA$137
CA$102.63
NOTE: Each processor memory bus will operate at up to 1333 MHz with either one quad-rank (QR) or two single-rank/dual-rank (SR/DR) DIMMs per processor memory channel and 1066 MHz with up to two QR or one QR and one SR/DR DIMMs per processor memory channel with standard voltage (1.5V, PC3) DIMMs. Memory bus will operate one speed slower when low voltage (1.35V, PC3L) memory is installed. Memory bus speeds may be further limited by the speed of the memory used as well.
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
CA$583
CA$342.10
CA$657
CA$444.73
CA$313
CA$225.79
12G 10K Drives 
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
CA$494
CA$290.10
CA$364
CA$213.47
CA$664
CA$477.57
CA$409
CA$286.00
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
CA$163
CA$116.31
CA$81
CA$57.47
CA$86
CA$61.58
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
CA$156
CA$109.47
CA$178
CA$130.00
CA$129
CA$75.26
CA$163
CA$116.31
CA$129
CA$75.26
CA$175
CA$102.63
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
CA$88
CA$61.58
CA$90
CA$65.68
CA$112
CA$75.26
CA$142
CA$114.95
CA$152
CA$106.74
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
CA$81
CA$61.58
CA$96
CA$67.05
CA$115
CA$67.05
CA$85
CA$60.21
CA$74
CA$53.37
CA$108
CA$75.26
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
CA$222
CA$130.00
CA$255
CA$175.16
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
CA$229
CA$134.10
CA$161
CA$106.74
CA$394
CA$301.05
SATA Hot Plug 2.5" Midline (MDL) Solid State Drives
CA$520
CA$409.15
CA$255
CA$184.73
Storage Controllers
CA$126
CA$101.26
CA$126
CA$101.26
NOTE: Supports the HPE ProLiant BL2x220c and BL685c G7 server blades.
CA$275
CA$161.47
I/O Expansion Options
CA$5,245
CA$4,720.98
CA$1,300
CA$1,026.30
CA$976
CA$677.36
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
InfiniBand Mezzanine Options
Ultrium Tape Blades
NOTE: LTO-4 Ultrium tape technology
CA$5,456
CA$4,909.82
NOTE: LTO-3 Ultrium tape technology
CA$3,793
CA$3,414.16
StorageWorks SB40c Storage Blade
CA$677
CA$526.83
Expansion Blade
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one PCIe connect board which requires installation.
CA$573
CA$336.63
Processors
| NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
Twelve-Core Processors
CA$1,256
CA$890.83
CA$3,463
CA$2,457.65
Eight-Core Processors
CA$3,480
CA$2,468.59
CA$426
CA$320.21
NOTE: HPE ProLiant BL685c G7 processor option kits contain two (2) processors.
NOTE: The ProLiant BL685c G7 only supports two (2) and four (4) processor configurations.
Why Global One?
- Trusted by thousands. Over 32,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.
