HP ProLiant ML350 Gen9 Parts

Unique Options
HP ML350 Gen9 Mini SAS Cable FIO Kit
NOTE: Required to support B140i embedded SATA controller
NOTE: FIO indicates factory integrated option for CTO order only.
HP Security Bezel Kit
NOTE: For ML350
Out of stock
HPE ML350 Gen9 2nd Expander FIO Kit
NOTE: 2nd Expander FIO Kit (769637-B21) is for factory integrated only and support for 25-48 HDDs, CANNOT be selected when the
NOTE: When 769637-B21 (2nd Expander FIO Kit) is selected, then 2nd CPU (-B21 processor)
NOTE: Can't support tape storage/ Disk-Based Backup device (RDX).
HP ML350 Gen9 X4 RPS Enablement Kit
NOTE: ML350 Gen9 supports max. four Power Supply slots. If Power supply selection qty is more than two, then X4 RPS Enablement Kit must be selected - to support the 3rd and 4th Power Supply Units.
NOTE: And this option is not supported with 720478-B21 (HPE 500W FS Plat Ht Plg Pwr Supply Kit).
NOTE: If hard drive cage selection qty. is more than three, this X4 RPS Enablement Kit must be selected - to get proper qty. of HDD backplane power connectors.
NOTE: If DW GPU card selection qty. is more than two, this X4 RPS Enablement Kit MUST be selected - in order to get
HP ML350 Gen9 NVMe 6 Solid State Drive Express Bay Enablement Kit
NOTE: Support for SFF chassis SKU only. Maximum installation of NVMe express bay
NOTE: One express bay bridge card is included in the enablement kit, with installation
NOTE: For NVMe PCIe SSD selection, refer to drive section in this document.
Back to top
Processors
E5-2600v4 series Processors
E5-2600v3 series Processors
Back to top
Memory
Registered DIMMs (RDIMMs) for E5-2600v3 Series
HP 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
NOTE: Depending on Processor selected this memory will run at 1600, 1866 or 2133MHz.
NOTE: Mixing of DIMM types is not supported.
NOTE: Mixing of 2133 and 2400MHz DIMMs is not supported.
$619.00 $579.00
Load Reduced DIMMs (LRDIMMs) for E5-2600v3 Series
HP 64GB (1x64GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
NOTE: Depending on Processor selected this memory will run at 1600, 1866 or 2133MHz.
NOTE: Mixing of DIMM types is not supported.
NOTE: Mixing of 2133 and 2400MHz DIMMs is not supported.
$1,618.00 $1,305.00
Registered DIMMs (RDIMMs) for E5-2600v4 Series
NOTE: The following memory is supported by the E5-2600v4 series Processor only.
HPE 16GB (1x16GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
NOTE: Depending on Processor selected this memory will run at 1866, 2133 or 2400MHz.
NOTE: Mixing of DIMM types is not supported.
NOTE: Mixing of 2133 and 2400MHz DIMMs is not supported.
$353.00 $280.00
Load Reduced DIMMs (LRDIMMs) for E5-2600v4 Series
NOTE: The following memory is supported by the E5-2600v4 series Processor only.
HPE 128GB (1x128GB) Octal Rank x4 DDR4-2400 CAS-20-18-18 Load Reduced Memory Kit
NOTE: Depending on Processor selected this memory will run at 1866, 2133 or 2400MHz.
NOTE: Mixing of DIMM types is not supported.
NOTE: Mixing of 2133 and 2400MHz DIMMs is not supported.
$7,500.00 $5,849.00
Back to top
Drives
NOTE: For a complete list of the drive, controller and cable options please check the compatibility matrix: https://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA5-4154ENW&cc=us&lc=en
12G SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
12G SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives
6G SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives
6G SATA Hot Plug LFF (3.5-inch) Mixed Use Solid State Drives
12G SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
12G SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
6G SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
12G SAS Hot Plug SFF (2.5-inch) Read Intensive Solid State Drives
12G SAS Hot Plug SFF (2.5-inch) Write Intensive Solid State Drives
12G SAS Hot Plug LFF (3.5-inch) Mixed Use Solid State Drives
12G SAS Hot Plug SFF (2.5-inch) Mixed Use Solid State Drives
6G SATA Hot Plug WI-3 SFF (2.5-inch) SC Solid State Drives
6G SATA Hot Plug SFF (2.5-inch) Mixed Use Solid State Drives
6G SATA Hot Plug LFF (3.5-inch) Mixed Use Solid State Drives
Mixed Use - 6G SATA - M.2 - Solid State Drives
6G SATA Hot Plug LFF (3.5-inch) SC Read Intensive Solid State Drives
6G SATA Hot Plug SFF (2.5-inch) SC Read Intensive Solid State Drives
Read Intensive - 6G SATA - M.2 - Solid State Drives
HPE NVMe PCIe Read Intensive SFF (2.5 inch) Solid State Drives
HPE 480GB NVMe x4 Lanes Read Intensive SFF (2.5in) SCN Digitally Signed Firmware SSD
NOTE: ML350 Gen9 6SFF Express Bay Enablement Kit (726551-B21) is required to support these drives.
NOTE: HPE has qualified the NVMe drive portfolio using the Operating System inbox drivers, full detail on the HPE Solid State Drive QuickSpecs.
$975.00
HPE NVMe PCIe Mixed Use SSDs
HPE 400GB NVMe x4 Lanes Mixed Use SFF (2.5in) SCN Digitally Signed Firmware SSD
NOTE: ML350 Gen9 6SFF Express Bay Enablement Kit (726551-B21) is required to support these drives.
NOTE: HPE has qualified the NVMe drive portfolio using the Operating System inbox drivers, full detail on the HPE Solid State Drive QuickSpecs.
$1,275.00
M.2 SSD
HPE Universal SATA HHHL M.2 Kit
NOTE: M.2 SSD ML-DL Enablmt Kit can be used to build RAID 0, 1 by using B140i controller.
$299.00
- When HPE 120GB or 340GB M.2 SSD ML-DL Dual Enablmt Kit is ordered, it can support RAID 0, 1.
- When HPE 120GB or 340GB M.2 SSD ML-DL Sngl Enablmt Kit is ordered, it can support RAID 0.
NOTE: M.2 SSD ML-DL Enablmt Kit CANNOT support RAID setting when AROC card (P440ar or H240ar) is selected. Embedded B140i controller CANNOT be used when AROC is ordered.
Hard Drive Blank Kits
Hard Drive Kits
HP ML350 Gen9 NVMe 6 Solid State Drive Express Bay Enablement Kit
NOTE: The ML350 Gen9 6SFF Express Bay kit is consist of one x6 SFF NVMe drive cage assembly, one
Back to top
Networking
1 Gigabit Ethernet adapters
10 Gigabit Ethernet adapters
25 Gigabit Ethernet adapters
HPE Ethernet 4x25Gb 1-port 620QSFP28 Adapter
NOTE: The ML350 Gen9 ships with 4x1Gb ports Embedded.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information: http://www.hp.com/go/ProLiantNICs.
$2,500.00 $1,950.00
Back to top
Power Supplies
HPE Flex Slot Platinum Hot-plug Power supplies
HP ML350 Gen9 X4 RPS Enablement Kit
NOTE: If Power supply selection qty is more than two, then X4 RPS Enablement Kit must be selected (minimum Power Supply qty. selection to configure with X4 RPS Enablement Kit is three).
NOTE: And this option is not supported with 720478-B21 (HPE 500W FS Plat Ht Plg Pwr Supply Kit).
NOTE: If hard drive cage selection qty. is more than three, this X4 RPS Enablement Kit must be selected - to get proper qty. of HDD backplane power connectors.
NOTE: If DW GPU card selection qty. is more than two, this X4 RPS Enablement Kit MUST be selected - in order to get
Back to top
Computation and Graphics Accelerators
HP ML350 Gen9 Graphic Card Support Kit
NOTE: One Graphic Card Support Kit- 726565-B21 is required for each computation or graphics accelerator except for K2200 or M2000.
NVIDIA Tesla K40C 12GB Computational Accelerator
NOTE: A maximum of four of these cards can be selected. Each requires one Graphic Card Support Kit (726565-B21).
NOTE: If this SKU is selected then minimum quantity = 2 of 800W Power Supply Kit (725870-B21)
HP AMD FirePro W7100 Accelerator Kit
NOTE: A maximum of four of these cards can be selected. Each requires one Graphic Card Support Kit (726565-B21).
HPE NVIDIA Quadro M4000 Graphics Accelerator
NOTE: A maximum of four of these cards can be selected. Each requires one Graphic Card Support Kit (726565-B21).
NOTE: Only supported with E5-2600v4 processors.
HP NVIDIA Quadro M5000 Graphics Accelerator
NOTE: A maximum of four of these cards can be selected. Each requires one Graphic Card Support Kit (726565-B21).
NOTE: Only supported with E5-2600v4 processors.
HPE NVIDIA Quadro P4000 Graphics Accelerator
NOTE: A maximum of four of these cards can be selected.
NOTE: Only supported with E5-2600v4 processors.
NOTE: If more than two Double Wide Graphics options are selected, then HPE ML350 Gen9 X4 RPS Enablement
NOTE: Only the above listed Graphics cards are HPE standard supported options in this server.
NOTE: The NVIDIA Quadro modules are supported only on 64-bit versions of Linux and Windows operating systems as well as on Virtual Machine client operating systems. The supported bare metal operating systems are RHEL6, SLES 11 and Windows Server 2012 R2.
NOTE: Please see the HPE Power Advisor for estimated power consumption of your individual system configuration prior to installing GPUs. The HPE Power Advisor is located at: http://www.hpe.com/info/hppoweradvisor.
NOTE: All GPU Accelerators are restricted to equal less than 1024GB for system HOST memory.
Back to top
Cooling Options
HP ML350 Gen9 Redundant Fan Kit
NOTE: This kit consists of four
$299.00 $275.00
Back to top
Storage Controllers
SAS Controllers
HPE Flexible Smart Array Controllers
HP Smart Array P440ar/2GB FBWC 12Gb 2-ports Int SAS Controller
NOTE: Provides support for up to 8 internal SAS/SATA drives without using a PCIe slot.
NOTE: Includes the HPE Smart Storage Battery.
$228.00 $181.00
HP Smart Array P440ar/2GB FBWC 12Gb 2-ports Int FIO SAS Controller
NOTE: Provides support for up to 8 internal SAS/SATA drives without using a PCIe slot.
NOTE: Includes the HPE Smart Storage Battery.
NOTE: FIO indicates factory integrated option via CTO.
$228.00 $181.00
HPE Smart Array Controllers
HP Smart Array P440/4GB FBWC 12Gb 1-port Int SAS Controller
NOTE: Provides support for up to 8 internal SAS/SATA drives, consumes 1 PCIe slot.
$338.00 $268.00
HP Smart Array P440/4GB FBWC 12Gb 1-port Int FIO SAS Controller
NOTE: Includes the HPE Smart Storage Battery.
NOTE: FIO indicates factory integrated option via CTO.
HP Smart Array P840/4GB FBWC 12Gb 2-ports Int FIO SAS Controller
NOTE: Includes the HPE Smart Storage Battery.
NOTE: FIO indicates factory integrated option via CTO.
$417.00 $331.00
HPE Smart Host Bus Adapters
HP H240ar 12Gb 2-ports Int Smart Host Bus Adapter
NOTE: Provides support for up to 8 internal SAS/SATA drives without using a PCIe slot.
$107.00 $82.00
HP H240ar 12Gb 2-ports Int FIO Smart Host Bus Adapter
NOTE: Provides support for up to 8 internal SAS/SATA drives without using a PCIe slot.
NOTE: FIO indicates factory integrated option via CTO.
$107.00 $82.00
HP H240 12Gb 2-ports Int FIO Smart Host Bus Adapter
NOTE: FIO indicates factory integrated option via CTO.
$174.00 $138.00
Optional Upgrades
HP 12Gb SAS Expander Card for ML350 Gen9
NOTE: The SAS Expander card supports 24 drives. The SAS Expander card must be used in conjunction with an HPE Smart Array P440 or P840 controller, or an H240 Host Bus Adapter. The SAS Expander card cannot be connected to H240ar or P440ar Flexible Smart Array Controller (AROC) cards. The SAS Expander kit includes two cables to connect from the Smart Array controller or HBA to the SAS Expander and the other to connect from the Expander to the HDD backplane.
NOTE: It DOES NOT support tape storage/ Disk-Based Backup device (RDX).
HP ML350 Gen9 2nd Expander Card
NOTE: The ML350 Gen9 2nd Expander Card must be used in conjunction with ML350 Gen9 SAS Expander kit (769635-B21, see config. guideline
NOTE: This kit DOES NOT support tape storage or disk-based backup devices (RDX) either.
HPE 96W Smart Storage Battery 145mm Cbl for DL/ML/SL Servers
NOTE: New part number P01366-B21 to replace the older part 727258-B21.
HPE Cable Options
HP ML350 Gen9 Flexible Smart Array Controller Mini-SAS Cable Kit
NOTE: Mini-SAS Cable Kit for Flexible Smart Array (AROC) Controller.
HP ML350 Gen9 Smart Array Cable Kit
NOTE: Mini-SAS Cable Kit for stand-up P-series Smart Array Card.
HP ML350 Gen9 Host Bus Adapter Mini-SAS Cable Kit
NOTE: Mini-SAS Cable kit for Host Bus Adapter.
HP ML350 Gen9 Mini SAS Cable FIO Kit
NOTE: Required to support B140i embedded SATA controller.
NOTE: FIO indicates factory integrated option for CTO order.
Back to top
Tape Backup
NOTE: For the complete range of tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape. For hardware and software compatibility of Hewlett Packard Enterprise
Tape Drives
HPE Tape Storage Systems
HPE StoreEver MSL6480
HPE StoreEver MSL6480 Scaleable Expansion Module
NOTE: Please see the HPE StoreEver MSL6480 Tape Library QuickSpecs for Technical Specifications and additional information.
Back to top
Storage Options
NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and Linux. For detailed compatibility information please see: http://h18006.www1.hp.com/storage/saninfrastructure/hba.html.
Emulex Fibre Channel HBAs
QLogic Fibre Channel HBAs
Converged Network Adapter
Back to top

Last updated: 8/14/2019

Need help finding the correct part? Live Chat operators are standing by. LET US HELP