Sign In or Register
Sales & Support: 1-877-418-3246
0 ITEMS | $0.00 View Cart
 

HP ProLiant ML110 G6 Parts

Memory
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
Back to top
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and firmware) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SATA Non-Hot Plug 3.5" Midline (MDL) Drives
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
NOTE: Support for SAS non-hot plug drives requires HP SAS/Smart Array Controller.
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
Back to top
Networking
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs
Back to top
Storage Controllers
SAS Controllers
NOTE: Support for SAS hard drives/tape drive requires selection of a SAS controller.
NOTE: Support for hardware RAID requires selection of a SAS controller.
Smart Array P212 Controller
Optional Upgrades
HP 650 mAh P-Series Battery
NOTE: Required to enable BBWC on the 256MB cache.
$99.00 $78.00
NOTE: Please see the following QuickSpecs for Technical Specifications and additional information:
HP Non-Hot Plug Internal SAS/SATA 4 Port Cable Kit
NOTE: This cable will only be required when Smart Array Controller is ordered with a BTO configuration.
$159.00 $155.00
SCSI HBA
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter
NOTE: Supports SCSI Tapes only, no RAID support.
NOTE: HBA is recommended for SCSI tape drive support.
$299.00 $218.00
NOTE: Please see the following QuickSpecs for Technical Specifications and additional information:
Back to top
Tape Backup
NOTE: For the complete range of StorageWorks tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape. For hardware and software compatibility of HP StorageWorks tape backup products see: http://www.hp.com/go/connect.
HP StorageWorks DAT 320 SAS Internal Tape Drive
NOTE: Connection using HP P212 Smart Array Controller SAS (462828-B21) recommended.
HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive
NOTE: Connection using HP P212 Smart Array Controller SAS (462828-B21) recommended.
$1,106.00 $995.00
HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive
NOTE: Connection using HP P212 Smart Array Controller SAS (462828-B21) recommended.
$2,054.00 $1,849.00
HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 SAS Tape Autoloader
NOTE: Requires HP 1U Tape Autoloader Rack-Mount Kit (AH166A) for rack installation. Connection using HP P212 Smart Array Controller SAS (462828-B21) recommended.
$5,421.00 $4,879.00
HP StorageWorks MSL2024 Tape Library with one LTO-3 Ultrium 920 SAS Drive
NOTE: Connection using HP P212 Smart Array Controller SAS (462828-B21) recommended.
$3,554.00 $3,199.00
Back to top
Disk Backup
NOTE: For the complete range of StorageWorks D2D Backup Systems see: http://www.hp.com/go/d2d. For the complete range of StorageWorks RDX drives and media see: http://www.hp.com/go/rdx. For hardware and software compatibility of HP StorageWorks disk backup products see: http://www.hp.com/go/connect.
HP StorageWorks D2D Backup Systems with Backup Data Deduplication
NOTE: These are network connected appliances with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.
HP StorageWorks D2D2502i Backup System
NOTE: 1.5TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.
HP StorageWorks D2D2504i Backup System
NOTE: 3.0TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.
USB Removable Media RDX Disk Backup Systems
HP StorageWorks RDX320 Internal Removable Disk Backup System
NOTE: 320GB of disk capacity per data cartridge.
$554.00 $499.00
HP StorageWorks RDX500 Internal Removable Disk Backup System
NOTE: 500GB of disk capacity per data cartridge.
HP StorageWorks RDX750 Internal Removable Disk Backup System
NOTE: 750GB of disk capacity per data cartridge.
$772.00 $695.00
Back to top

Last updated: 5/22/2015

Need help finding the correct part? Live Chat operators are standing by. LET US HELP