HPE ProLiant DL80 Gen9 Networking Adapters
The DL80 Gen9 takes network adapters in a FlexibleLOM slot on an optional riser and in up to six PCIe 3.0 slots on two risers and the motherboard, of which slots 6 and 7 need the second processor. Two embedded 1GbE RJ-45 ports (the HPE Embedded Dual Port 361i Adapter) on every model. HPE's QuickSpecs have listed 15 network adapters (Ethernet and InfiniBand) for it across editions.
- 15 adapters
- 1GbE to 10GbE
- New and refurbished
- Tested or factory sealed
From the HPE ProLiant DL80 Generation9 (Gen9) QuickSpecs (c04447832, version 26, 4-December-2017), which HPE has retired.
Slot mapWhere each adapter goes in a DL80 Gen9
- FlexibleLOM
- One FlexibleLOM slot, slot 5 on the optional FlexibleLOM riser (x8, processor 1); the FlexibleLOM Adapters list has 1Gb and 10Gb Ethernet FlexibleLOMs pp. 2, 5, 22
- Built-in ports
- 2 x 1GbE (361i, all models) pp. 2, 6, 15, 43
- Motherboard slot 1
- Slot 1: PCIe 3.0 x16. On processor 1. + 2 other risers HPE lists for this position pp. 2, 5, 14
- Motherboard slot 4
- Slot 4: PCIe 3.0 x16. On processor 1. + 1 other riser HPE lists for this position pp. 2, 5, 14
- Motherboard slots
- Slots 3, 6, 7: PCIe 3.0 x8, x8, x16. Slot 3 on processor 1; slots 6 and 7 need processor 2. pp. 2, 5, 14
HPE's words for each line
- FlexibleLOM “Flexible LOM Riser | (Optional)” (page 5) “5 PCIe 3.0 x8 x8 Flexible LOM CPU 1 slots” (page 5) “Slot 5 PCIe3 x8 FlexibleLOM riser (optional)” (page 2) “FlexibleLOM Adapters” (page 22) “HPE Ethernet 1Gb 4-port 366FLR Adapter 665240-B21” (page 22) “HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter 727054-B21” (page 22)
- Built-in ports “Embedded 2x1GbE network adapter” (page 2) “LOM Network Ports 2 x 1GbE ports” (page 6) “Network Controller HPE Embedded Dual Port 361i Adapter Network Interface” (page 15) “Connector Two RJ-45” (page 43)
- Motherboard slot 1 “Motherboard slots | (Standard)” (page 5) “1 PCIe 3.0 x16 x16 Low profile CPU 1 slots” (page 5) “3 PCIe 3.0 x8 x8 Low profile CPU 1 slots” (page 5) “4 PCIe 3.0 x16 x16 Low profile CPU 1 slots” (page 5) “6 PCIe 3.0 x8 x8 Low profile CPU 2 slots” (page 5) “7 PCIe 3.0 x16 x16 Low profile CPU 2 slots” (page 5) “Slot 7 PCIe3 x16 low-profile, standup” (page 2) “PCI-Express Slots 3 PCIe 3.0 slots (Without risers)” (page 14)
- Motherboard slot 4 “Motherboard slots | (Standard)” (page 5) “1 PCIe 3.0 x16 x16 Low profile CPU 1 slots” (page 5) “3 PCIe 3.0 x8 x8 Low profile CPU 1 slots” (page 5) “4 PCIe 3.0 x16 x16 Low profile CPU 1 slots” (page 5) “6 PCIe 3.0 x8 x8 Low profile CPU 2 slots” (page 5) “7 PCIe 3.0 x16 x16 Low profile CPU 2 slots” (page 5) “Slot 7 PCIe3 x16 low-profile, standup” (page 2) “PCI-Express Slots 3 PCIe 3.0 slots (Without risers)” (page 14)
- Motherboard slots “Motherboard slots | (Standard)” (page 5) “1 PCIe 3.0 x16 x16 Low profile CPU 1 slots” (page 5) “3 PCIe 3.0 x8 x8 Low profile CPU 1 slots” (page 5) “4 PCIe 3.0 x16 x16 Low profile CPU 1 slots” (page 5) “6 PCIe 3.0 x8 x8 Low profile CPU 2 slots” (page 5) “7 PCIe 3.0 x16 x16 Low profile CPU 2 slots” (page 5) “Slot 7 PCIe3 x16 low-profile, standup” (page 2) “PCI-Express Slots 3 PCIe 3.0 slots (Without risers)” (page 14)
From the HPE ProLiant DL80 Generation9 (Gen9) QuickSpecs (c04447832, version 26, 4-December-2017).
All DL80 Gen9 network adapters
The network adapters HPE's QuickSpecs have listed for the DL80 Gen9 across editions, grouped by slot and type. In each group the adapters in stock come first, then the ones our customers order most.
FlexibleLOM or PCIe on the DL80 Gen9?
| FlexibleLOM | PCIe adapter | |
|---|---|---|
| How many | One FlexibleLOM slot, slot 5 on the optional FlexibleLOM riser (x8, processor 1); the FlexibleLOM Adapters list has 1Gb and 10Gb Ethernet FlexibleLOMs. | Up to six PCIe 3.0 slots on two risers and the motherboard |
| What HPE has listed | 1GbE to 10GbE Ethernet | 1GbE to 10GbE Ethernet; InfiniBand adapters |
| Slot rules | Only one FlexibleLOM fits the server, and it can be changed after the server ships. | Slots 6 and 7 need the second processor. |
| How to tell from the name | FLR in the name, e.g. 560FLR-SFP+ | No FLR, e.g. 560SFP+ |
How to choose a DL80 Gen9 network adapter
Decide the FlexibleLOM first
Only one FlexibleLOM fits the server, and it can be changed after the server ships.
HPE: “Only one FlexibleLOM can be added to the server. These options are upgradeable and can be changed from the original configuration after the server is shipped.” (page 16)
Match the cabling to the switch
HPE notes that DAC cables or fiber transceivers and cables are bought separately.
HPE: “NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.” (page 22)
Count the processors
Slots 6 and 7 need the second processor.
HPE: “6 PCIe 3.0 x8 x8 Low profile CPU 2 slots” (page 5)
Plan the server memory
10Gb adapters, FlexibleLOM and stand-up, need at least 2 GB of server memory per adapter.
HPE: “For 10Gb adapters, a minimum of two Gigabytes (2 GB) of server memory is required per each adapter.” (page 16)
DL80 Gen9 adapter questions
How many network adapters can a DL80 Gen9 take?
The DL80 Gen9 takes network adapters in a FlexibleLOM slot on an optional riser and in up to six PCIe 3.0 slots on two risers and the motherboard, of which slots 6 and 7 need the second processor. Only one FlexibleLOM fits the server, and it can be changed after the server ships.
Does the DL80 Gen9 have network ports built in?
Two embedded 1GbE RJ-45 ports (the HPE Embedded Dual Port 361i Adapter) on every model. The one-processor pre-configured Entry and Base models (830013-B21, 833869-B21) list 3 PCIe 3.0 slots without risers; the CTO chassis (778686-B21, 778685-B21, 787217-B21) list 5 low-profile PCIe 3.0 slots; all have the embedded 361i.
Will an OCP 3.0 adapter fit a DL80 Gen9?
HPE's QuickSpecs for the DL80 Gen9 give it one FlexibleLOM slot: “Flexible LOM Riser | (Optional)” (page 5). The list HPE gives for it has FlexibleLOM adapters for that slot and no OCP 3.0 adapters.
Are cables or transceivers included?
HPE notes that DAC cables or fiber transceivers and cables are bought separately. HPE: “NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.” (page 22).
Do I need the second processor for more adapters?
Slots 6 and 7 need the second processor. Slots 1 to 4 run from processor 1. HPE: “6 PCIe 3.0 x8 x8 Low profile CPU 2 slots” (page 5).
What do “QuickSpecs version 26” and “earlier HPE edition” mean on the list?
An adapter tagged “Listed in QuickSpecs version 26” is in version 26 of HPE's QuickSpecs for the DL80 Gen9, the edition this page is built from. One tagged “Listed in an earlier HPE edition” was listed for this server in an earlier edition of HPE's QuickSpecs and is not in version 26.
What if the adapter I need is out of stock?
Out of stock today does not mean unavailable: we can often source this part. Add it to a quote request and we reply with current pricing and availability. Every message, quotes included, is answered within 24 hours.
Most ordered for the DL80 Gen9
The adapters on this page our customers order most, for any server. Each card shows only while the store has it in stock.
- 652503-B21HPE Ethernet 10Gb 2-port 530SFP Adapter10GbE · 2 ports · PCIe
- 665240-B21HPE Ethernet 1Gb 4-port 366FLR Adapter1GbE · 4 ports · FlexibleLOM
- 647594-B21HPE Ethernet 1Gb 4-port 331T Adapter1GbE · 4 ports · BASE-T · PCIe
- 656596-B21HPE Ethernet 10Gb 2-port 530T Adapter10GbE · 2 ports · BASE-T · PCIe
- 652497-B21HPE Ethernet 1Gb 2-port 361T Adapter1GbE · 2 ports · BASE-T · PCIe
- 700759-B21HPE FlexFabric 10Gb 2-port 533FLR-T Adapter10GbE · 2 ports · BASE-T · FlexibleLOM
- 716591-B21HPE Ethernet 10Gb 2-port 561T Adapter10GbE · 2 ports · BASE-T · PCIe
- 700751-B21HPE FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter10GbE · 2 ports · SFP+ · FlexibleLOM
No adapter matches all of these filters.
FlexibleLOM adapters
6 adapters
One FlexibleLOM slot, slot 5 on the optional FlexibleLOM riser (x8, processor 1); the FlexibleLOM Adapters list has 1Gb and 10Gb Ethernet FlexibleLOMs.
- 665240-B21HPE Ethernet 1Gb 4-port 366FLR Adapter1GbE4 portsFlexibleLOM
- 700759-B21HPE FlexFabric 10Gb 2-port 533FLR-T Adapter10GbE2 portsBASE-TFlexibleLOM
- 700751-B21HPE FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter10GbE2 portsSFP+FlexibleLOM
- 629135-B21HPE Ethernet 1Gb 4-port 331FLR Adapter1GbE4 portsFlexibleLOM
- 665243-B21HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter10GbE2 portsSFP+FlexibleLOM
- 700699-B21HPE Ethernet 10Gb 2-port 561FLR-T Adapter10GbE2 portsBASE-TFlexibleLOM
PCIe Ethernet adapters
7 adapters
Stand-up cards for the PCIe slots.
- 652503-B21HPE Ethernet 10Gb 2-port 530SFP Adapter10GbE2 portsPCIe
- 647594-B21HPE Ethernet 1Gb 4-port 331T Adapter1GbE4 portsBASE-TPCIe
- 656596-B21HPE Ethernet 10Gb 2-port 530T Adapter10GbE2 portsBASE-TPCIe
- 652497-B21HPE Ethernet 1Gb 2-port 361T Adapter1GbE2 portsBASE-TPCIe
- 716591-B21HPE Ethernet 10Gb 2-port 561T Adapter10GbE2 portsBASE-TPCIe
- 615732-B21HPE Ethernet 1Gb 2-port 332T Adapter1GbE2 portsBASE-TPCIe
- 665249-B21HPE Ethernet 10Gb 2-port 560SFP+ Adapter10GbE2 portsSFP+PCIe
InfiniBand and Omni-Path adapters
2 adapters
Under HPE InfiniBand, HPE lists one adapter, the InfiniBand FDR/Ethernet 544+QSFP, and refers to the HPE InfiniBand Options QuickSpecs for more.
- 764284-B21HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter40Gb2 portsQSFPPCIeInfiniBand / Omni-Path
- 702211-B21HPE InfiniBand FDR 2-port 545QSFP AdapterInfiniBand FDR2 portsQSFPPCIeInfiniBand / Omni-Path
Equipping several servers?
Send your list as one quote request. Every message, quotes included, is answered within 24 hours.


