PLEASE NOTE THAT WE ARE OPEN NORMAL HOURS TODAY, MARCH 25.
ALL ORDERS RECEIVED FROM MARCH 16 THRU MARCH 24 WILL SHIP TODAY AS SCHEDULED.

 

HP ProLiant DL785 G6 Parts

Drives
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: All the internal drives in HP ProLiant DL785 G6 will operate at a maximum data transfer rate of 3Gb/s.
NOTE: Up to 16 disks in position 1-16 are supported if the HP SAS Expander and P410 Controller is used.
Back to top
Networking
Gigabit Ethernet adapters
HP NC364T PCI-E Quad Port Gigabit Server Adapter
NOTE: There is a maximum of five NC364T PCI Express Quad Port Gigabit Server Adapter NICs allowed in this server.
$99.00 $80.00
HP NC373T PCI-E Multifunction Gigabit Server Adapter
NOTE: Supported on a Full Length-Full Height slot only.
$64.00 $52.00
10 Gigabit Ethernet adapters
HP NC522SFP Dual Port 10GbE Gigabit Server Adapter
NOTE: A minimum of two Gigabyte (2 GB) of server memory is required for each NC522SFP dual port adapter.
$99.00 $80.00
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs.
Back to top
Power Supplies
Power Supplies
Back to top
Storage Controllers
SAS Controller
Smart Array E500 Controller
Smart Array P400 Controller
HP Smart Array P400 Controller
NOTE: 405132-B21 comes with 256 MB Cache.
$69.00 $56.00
Smart Array P800 Controller
HP Smart Array P800 Controller
NOTE: 381513-B21 comes with 512 MB Cache.
$94.00 $76.00
Smart Array P212 Controller
Smart Array P410 Controller
Smart Array P411 Controller
Optional Upgrades
HP Smart Array P400 Battery Attach Kit
NOTE: This option kit contains a 24" battery cable and adhesive material for installing a battery into the server if a Smart Array E500 is integrated outside of the factory. For all solutions, please refer to the server QuickSpecs and User's Manual for detailed installation instructions.
$106.00 $78.00
HP 512MB w/Battery Smart Array Battery Back Write Cache Enabler
NOTE: For Smart Array P400 Controller only.
NOTE: If you install the 512MB DDR BBWC as an upgrade to a Smart Array P400/256MB Controller, you must also order part 417836-B21 (HP SA-P400 and SA-E500 24 In Battery Cable Kit).
$94.00 $76.00
HP Smart Array Cache Battery Kit
NOTE: For Smart Array P400 Controller only.
NOTE: If you install the Battery-backed write cache as an upgrade to a Smart Array P400/256MB Controller, you must also order part 417836-B21 (HP SA-P400 and SA-E500 24 In Battery Cable Kit).
$219.00 $188.00
HP 256MB P-Series Cache Upgrade
NOTE: Option kit not supported for factory integration.
NOTE: Supported on HP Smart Array P212 Controller and P410 Controller only.
$58.00 $47.00
HP 512MB P-Series Battery Backed Write Cache Upgrade
NOTE: Option kit not supported for factory integration.
NOTE: Supported on HP Smart Array P212 Controller and P410 Controller only.
$94.00 $76.00
HP 650 mAh P-Series Battery
NOTE: Option kit not supported for factory integration.
NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HP Smart Array P212 Controller, HP Smart Array P410 Controller, and HP Smart Array P411 Controller only.
$185.00 $150.00
SAS Controller Options
HP 24 Bay 3Gb SAS Expander Card
NOTE: Option kit not supported for factory integration.
NOTE: Enables a single Smart Array P410 Controller to control all of the embedded HDD's. Allows the configuration of a RAID array with up to 16 embedded HDD's. The Controller must be installed in PCIe Slot 1 and the Expander in PCIe Slot 2. The embedded SA P400i controller is not used.
NOTE: AM440A HP DL785 SAS Expander cable option kit required.
NOTE: Requires SA P410 Controller with Cache memory.
$140.00 $113.00
NOTE: Please see the following Controller QuickSpecs for Technical Specifications and additional information:
SAS HBA
NOTE: Please see the following QuickSpecs for additional information:
SCSI HBA
Back to top
SAS Option Kit
HP DL785 G6 SAS Drive Option Kit
NOTE: The SAS Option Kit enables the second drive cage to support an additional eight SFF SAS hard disk drives, for a total internal support of sixteen SFF SAS hard disk drives.
Out of stock
Back to top

Last updated: 3/15/2019

Need help finding the correct part? Live Chat operators are standing by. LET US HELP