P13237-001 is the HPE spare part number for MSA 1.92TB SAS 12G Read Intensive SFF (2.5in) M2 SSD. This is the number printed on the drive label and referenced in HPE service documentation and controller event logs, so it is what you will find when identifying a failed drive pulled from an MSA enclosure. The drive is a 1.92 TB read intensive SAS solid state drive with a 12 Gb/s Serial Attached SCSI 3 interface, built in the 2.5-inch small form factor for hot-swap SFF bays. It is supported in MSA 1060 and MSA 2060 arrays.
HPE Option Part #: R0Q47A
HPE Spare Part #: P13237-001
PRODUCT SPECIFICATIONS FOR P13237-001:
- Brand: HPE
- Product Line: HPE Read Intensive
- Data Transfer Rate (Hard Drive): 12 Gb/s
- Form Factor (Short): 2.5"
- Form Factor (Short) (metric): 6.4 cm
- Hard Drive Capacity: 1.92 TB
- Hard Drive Type: Hot-swap hard drive
- HD Interface: Serial Attached SCSI 3
- Storage Interface: Serial Attached SCSI 3
- Interface Provided: 1 x SAS 12 Gb/s
- Compatible Bay: 2.5" SFF
- Hard Drive Form Factor: 2.5" SFF
- Hard Drive Form Factor (metric): 6.4 cm SFF
COMPATIBLE WITH:
PROLIANT MSA SERIES
** This list may not be complete. Contact us via Live Chat if you have any questions about compatibility.
FREQUENTLY ASKED QUESTIONS ABOUT P13237-001
What is the difference between P13237-001 and R0Q47A?
They are the same physical drive under two HPE part numbering schemes. P13237-001, the number on this page, is the spare part number: the identifier carried on the drive label and used in service and replacement documentation. R0Q47A is the option number, the orderable configuration code used when the drive is purchased as a standalone upgrade. A drive labeled with either number is the same 1.92 TB SAS 12G read intensive SFF SSD.
Which arrays does this drive fit?
This SSD is listed as compatible with HPE MSA 1060 and MSA 2060 storage arrays. It uses a 12 Gb/s SAS interface and installs in 2.5-inch SFF drive bays. If you pulled the failed drive from an MSA 1060 or MSA 2060, this spare number is the direct like-for-like replacement. Compatibility with other platforms is not covered by the specifications for this part.
Can I replace the drive without powering down the array?
The drive is specified as a hot-swap unit, so it is designed to be removed and inserted while the enclosure is powered. Follow the MSA service procedure for the failed drive slot, confirm the array has flagged the drive, and allow the controller to begin its rebuild once the replacement is seated. Do not remove more drives than the configured fault tolerance allows.
What does read intensive mean for this SSD?
Read intensive is the HPE product line designation for this drive. Drives in this category are positioned for workloads dominated by read operations rather than sustained heavy writes. If the failed drive you are replacing carried the same read intensive designation, this part matches that class. Substituting a different endurance class changes the drive's intended workload profile, so match the original designation when replacing.
What arrives when I order this spare number?
You receive the 1.92 TB SAS 12G read intensive 2.5-inch SFF solid state drive itself. Spare part numbers cover the drive as a service replacement unit. Confirm whether your MSA enclosure requires a carrier or tray for the SFF bay, and reuse hardware from the failed drive where the service procedure permits, since carriers are not part of the drive specification.
HPE PARTSURFER INFO FOR P13237-001 (R0Q47A)
| Spare PN | Description | |
|---|---|---|
 | P13237-001 | HPE MSA 1.92TB SAS 12G READ INTENSIVE SFF (2.5IN) M2 SSD |
| P19106-001 | 960GB SAS Solid State Drive, 2.5 inch Small Form Factor, Read Intensive M2 TAA SED |
Last Updated: 2026-09-03
- Trusted by thousands. Over 36,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local government agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 4 PM ET the same day and offers NEXT DAY delivery to US customers.
1 Review
This product is warrantied against hardware failure for a period of 3 Years from the date of purchase. Before making a purchase, please take a moment to review our return policy below.
Returns
It is the customer's responsibility to verify compatibility with their machine(s) before placing an order. If an item is ordered by mistake, it can be returned for refund, minus a 25% restocking fee, within 5 business days of receipt. The cost of freight is not refundable.
Please be aware that factory-sealed equipment can only be returned if it remains unopened.
Defective Products
If you have received a defective part and your machine is still within the HPE warranty period, please initiate a warranty exchange by visiting the HPE Enterprise Support Center. Be sure to have the serial numbers of the defective drive and your server/storage array handy.
In case your hardware becomes defective during the Global One warranty period, but the HPE warranty has expired, you can return the product to us for a working replacement. You are responsible for the shipment of returned merchandise. However, we will cover the expense of Ground /Economy shipment for the replacement item(s).
Requesting an RMA
To initiate a return or warranty claim, please complete and submit the RMA Request Form.
