HPE WS460c Gen8 Graphics Server Blade Parts
Networking
NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of server memory.
NOTE: A 10 Gigabit Ethernet adapter supports linking at 1Gbps or 10Gbps when connected to an interconnect module with 10Gb Ethernet downlinks.
NOTE: A 10 Gigabit Ethernet adapter supports linking at only 1Gbps when connected to an interconnect module with 1Gb Ethernet downlinks.
NOTE: The 10 Gigabit Ethernet adapters on each server blade connect to a 10Gb interconnect in bays 3-6 (HPE BladeSystem c7000 Enclosure) or bays 2-4 (HPE BladeSystem c3000 Enclosure).
FlexibleLOM Adapters
NOTE: The server supports one (1) FlexibleLOM that is installed in the FlexibleLOM connectors and is already included in the pre-configured models. However, it must be added in Step 2 for Configure-to-order Models. The FlexibleLOM options below are used to change these original FlexibleLOMs.
10 or 20 Gigabit Ethernet FlexibleLOM
NOTE: Client OS on bare metal is supported only with this BLOM.
HPE Infiniband Mezzanine Adapters
NOTE: InfiniBand mezzanine HCAs are supported on the HPE ProLiant WS460c Gen8 with server OS or hypervisors. Windows client OS (Windows 7) not supported.
NOTE: When an InfiniBand adapter is installed in mezzanine slot 1, only one port is active (regardless of operating mode). When installed in any other mezzanine slot, both ports are active.
NOTE: The QDR InfiniBand adapter may be installed in upper mezzanine slot of the WS460cwhen vacant
$91
$65.00
NOTE: The FDR InfiniBand adapter may be installed in upper mezzanine slot of the WS460cwhen vacant
$203
$137.00
Fibre Channel
NOTE: All Fibre Channel mezzanine HBAs are supported on the HPE ProLiant WS460c Gen8with server OS or hypervisors only. Windows client OS (Windows 7) on bare-metal not supported.
Memory
NOTE: - HPE memory from previous generation servers are not qualified or warranted with this HPE ProLiant- WS460c- Server. HPE SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for- Gen8.
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM and LRDIMM.
NOTE: A minimum of one DIMM is required per server.
NOTE: For additional memory rules and guidelines, see the "Memory" section of the Quickspecs document for this server.
NOTE: When HPE 24GB (1x24GB) Three Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage FIO Memory Kits are used with any processors except the E5-2690, the E5-2643, the E5-2637 v2, the E5-2643 v2, or the E5-2667 v2 all 16 DIMM slots on the WS460cGen8 must be fully populated with these 24GB DIMMs. When HPE 24GB (1x24GB) Three Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage FIO Memory Kits are used with either the E5-2690, the E5-2643, the E5-2637 v2, the E5-2643 v2, or the E5-2667 v2, all 12 available DIMM slots on the WS460c Gen8 must be fully populated with these 24GB DIMMs.
NOTE: The internal USB 2.0 Port is not available when the HPE 24GB (1x24GB) Three Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage FIO Memory Kits (700404-B21) are used.
HPE SmartMemory
Registered DIMMs (RDIMMs) - E5-2xxx v2 series Processors
$63
$49.00
$92
$63.00
$61
$45.00
$73
$55.00
$100
$70.00
$63
$45.00
$81
$58.00
$62
$44.00
Registered DIMMs (RDIMMs) - E5-2xxx series Processors
$52
$39.00
$75
$55.00
$55
$39.00
$60
$44.00
$69
$49.00
$98
$75.00
$67
$48.00
Unbuffered with ECC DIMMs (UDIMMs) - E5-2xxx v2 series Processors
$60
$42.00
$87
$62.00
$162
$112.00
$161
$115.00
$181
$124.00
Unbuffered with ECC DIMMs (UDIMMs) - E5-2xxx series Processors
$89
$63.00
$98
$68.00
$104
$72.00
$101
$68.00
$165
$118.00
Load Reduced DIMMs (LRDIMMs) - E5-2600 v2 series Processors
Load Reduced DIMMs (LRDIMMs) - E5-2600 series Processors
NOTE: The HPE Q3000 Gen8 Mezz Graphics Kit (679855-B21) is installed in Mezz slot 2 and hence requires a two processor configuration which will provide a processor installed in the second CPU socket.
$147
$105.00
NOTE: PC3L is a low voltage memory.
Drives
NOTE: The ProLiant WS460c Gen8 server includes the new HPE hot-plug small form factor (SFF) SmartDrive carrier for enhanced management and reduced maintenance errors. HPE drives from previous generation servers are not compatible with the WS460c Gen8 drive bays.
NOTE: The mixing of standard SAS drives with SAS SSD is supported within the server, but limits the RAID configuration to two separate RAID 0 volumes. Mixing of other drives types is not supported.
NOTE: The hard drive options are not required when configuring a drive-less model.
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
SAS Hot Plug with Smart Drive SFF (2.5-inch) Enterprise Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives 
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise 512e Drives
SAS Hot Plug Smart Drive SFF (2.5-inch) Midline Drives
12G SAS Hot Plug VE SFF (2.5-inch) SC EV SSD
12G SAS Hot Plug SFF (2.5-inch) SC ENT SSD
12G SAS ME Hot Plug SFF (2.5-inch) SC EM SSD
$785
$557.00
$699
$499.00
$638
$437.00
12G SAS ME Hot Plug SFF (2.5-inch) SC EM SSD
$785
$549.00
$653
$447.00
6G SATA MLC Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives
$599
$499.00
$350
$250.00
$186
$135.00
6G SATA VE Hot Plug SFF(2.5-inch) SC EV G1 Solid State Drives
$457
$313.00
$351
$254.00
6G SATA LE Hot Plug SFF(2.5-inch) SC EL G1 Solid State Drives
6G SATA VE Hot Plug SFF(2.5-inch) Enterprise Solid State Drives
$622
$457.00
$315
$248.00
$366
$275.00
$244
$181.00
$396
$275.00
$399
$275.00
$167
$135.00
NOTE: The hard drive options are not required when configuring a drive-less model.
Graphic Options
NOTE: Available only with Intel® Xeon® E5-2600 v2 series processor configuration
NOTE: GRID K2 requires GPU Enablement Kit (PN 734206-B21).
NOTE: Available only with Intel® Xeon® E5-2600 v2 series processor configuration
NOTE: Requires GPU Enablement Kit (PN 734206-B21)
NOTE: Requires GPU Enablement Kit (PN 734206-B21)
$537
$395.00
NOTE: Required when using NVIDIA GRID K2 GPU (PN 729851-B21) or Tesla K20 or K20X.
Fibre Channel Mezzanines
NOTE: All Fibre Channel mezzanine HBAs are supported on the HPE ProLiant WS460c Gen8with server OS or hypervisors only. Windows client OS (Windows 7) on bare-metal not supported.
InfiniBand Mezzanines
NOTE: InfiniBand mezzanine HCAs are supported on the HPE ProLiant WS460c Gen8with server OS or hypervisors. Windows client OS (Windows 7) not supported.
NOTE: When an InfiniBand adapter is installed in mezzanine slot 1, only one port is active (regardless of operating mode). When installed in any other mezzanine slot, both ports are active.
NOTE: The QDR InfiniBand adapter may be installed in any vacant mezzanine slot of the server.
$91
$65.00
NOTE: The FDR InfiniBand adapter must be installed in mezzanine slot 1 for FDR mode and may be installed in any mezzanine slot if operated in any other mode.
$203
$137.00
$265
$189.00
Ultrium Tape Blades
NOTE: LTO-4 Ultrium tape technology.
NOTE: LTO-5 Ultrium tape technology.
$7,222
$6,500.00
Storage Blades
$1,292
$950.00
Expansion Blade
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one PCIe connect board which requires installation.
$359
$246.00
NOTE: This Expansion Blade does not support any PCIe graphics adapters. For such use, HP WS460c Gen8 Graphics Expansion (PN 684690-B21) must be used.
Processors
| NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
E5-2600 v2 series Processors
$1,847
$1,310.00
$1,580
$1,121.00
$1,509
$1,071.00
$2,698
$2,100.00
$2,265
$1,607.00
E5-2600 series Processors
$2,205
$1,575.00
NOTE: TheWS460cGen8supports one or two processors.
$110
$86.00
NOTE: TheWS460cGen8includes two I/O mezzanine expansion slots. A processor must be installed in processor slot 1 for access to the first mezzanine expansion slot (expansion slot 1). A processor must be installed in processor slot 2 for access to the second mezzanine expansion slot (expansion slot 2).
NOTE: All processors within the server must be identical.
NOTE: The letter L preceding the model number indicates denotes lower wattage.
NOTE: The processor model as well as the memory configuration determines the maximum speed memory can operate. Please see the see the Memory section later in this document
NOTE: The Intel Xeon E5-2620 processor does not support DIMMs at 1.35V. Using the HPE RBSU, 1.35V DIMMs can be changed to operate at 1.5V.
NOTE: The Intel Xeon E5-2600 v2 Processor Family can only be configured with the new 1866MHz HPE Smart Memory or the new 1600MHz Low Voltage (1.35v) HPE Smart Memory. The previously shipping Intel Xeon E5-2600 Processor Family cannot be configured with the new 1866MHz HPE Smart Memory or the new 1600MHz Low Voltage (1.35v) HPE Smart Memory.
NOTE: DIMM slots 4 and 5 are not accessible when either the E5-2690, the E5-2643, the E5-2643 v2, or the E5-2637 v2, or the E5-2667 v2 is used. In a 2 processor configuration, there are twelve (12) total available DIMM slots.
NOTE: For the maximum supported memory speeds for each processor listed above, please reference the 'Memory Speed by Processor Model' table in the Memory section of the QuickSpecs.
NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost Technology, with 8, 7, 6, 5, 4, 3, 2 or 1 core(s) active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: Up to 2 processors supported. Mixing different processor models is not supported.
NOTE: For the Intel C600 Chipset E5-2600 Series, the letter preceding the model number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6 is socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs.
NOTE: All processors support Intel Hyper-Threading and Intel Turbo Boost Technologies except the E5-2603 and E5-2609.
NOTE: When HPE 24GB (1x24GB) Three Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage FIO Memory Kits are used with any processors except the E5-2690, the E5-2643, the E5-2637 v2, the E5-2643 v2, or the E5-2667 v2 all 16 DIMM slots on theWS460cGen8must be fully populated with these 24GB DIMMs. When HPE 24GB (1x24GB) Three Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage FIO Memory Kits are used with either the E5-2690, the E5-2643, the E5-2637 v2, the E5-2643 v2, or the E5-2667 v2, all 12 available DIMM slots on theWS460cGen8must be fully populated with these 24GB DIMMs.
Why Global One?
- Trusted by thousands. Over 32,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.
